1 Scope
This standard specifies technical requirements, test methods, inspection rules as well as marking, packaging, operating instructions, transportation and storage of the coal mine low-concentration carrier catalytic methane transducer.
This standard is applicable to the coal mine low-concentration carrier catalytic methane transducer (hereinafter referred to as the transducer) which is used under the mine with combustible-gas explosive atmosphere.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document applies.
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Transducer Classification
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Operating Instructions, Transportation and Storage
Appendix A (Informative) Calculation for the Value of %CO2 of Infrared Carbon Dioxide Transducer
Appendix B (Informative) Treatment of the Value of %CO2 of Electrochemistry Carbon Dioxide Transducer
AQ 1052-2008 Coal mine low-concentration carrier (English Version)
Standard No.
AQ 1052-2008
Status
valid
Language
English
File Format
PDF
Word Count
7000 words
Price(USD)
170.0
Implemented on
2009-1-1
Delivery
via email in 1 business day
Detail of AQ 1052-2008
Standard No.
AQ 1052-2008
English Name
Coal mine low-concentration carrier
Chinese Name
矿用二氧化碳传感器通用技术条件
Chinese Classification
09
Professional Classification
AQ
ICS Classification
Issued by
SAWS
Issued on
2008-11-19
Implemented on
2009-1-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
7000 words
Price(USD)
170.0
Keywords
AQ 1052-2008, AQ/T 1052-2008, AQT 1052-2008, AQ1052-2008, AQ 1052, AQ1052, AQ/T1052-2008, AQ/T 1052, AQ/T1052, AQT1052-2008, AQT 1052, AQT1052
Introduction of AQ 1052-2008
1 Scope
This standard specifies technical requirements, test methods, inspection rules as well as marking, packaging, operating instructions, transportation and storage of the coal mine low-concentration carrier catalytic methane transducer.
This standard is applicable to the coal mine low-concentration carrier catalytic methane transducer (hereinafter referred to as the transducer) which is used under the mine with combustible-gas explosive atmosphere.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding corrigenda), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For undated references, the latest edition of the normative document applies.
Contents of AQ 1052-2008
Foreword II
1 Scope
2 Normative References
3 Terms and Definitions
4 Transducer Classification
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Operating Instructions, Transportation and Storage
Appendix A (Informative) Calculation for the Value of %CO2 of Infrared Carbon Dioxide Transducer
Appendix B (Informative) Treatment of the Value of %CO2 of Electrochemistry Carbon Dioxide Transducer
