FZ/T 81001-2025 Sleepwear
1 Scope
This standard specifies the requirements, inspection methods, inspection rules as well as marking, packaging, transport and storage for sleepwear.
This document applies to sleepwear (including sets) and other indoor home wear garments produced mainly from woven textile fabrics.
This document is not applicable to clothing for infants aged 36 months and below.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in colour
GB/T 1335 (All parts) Standard sizing systems for garments
GB/T 3921-2008 Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda
GB/T 4802.1-2008 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: circular locus method
GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 5711 Textiles - Tests for color fastness - Color fastness to drycleaning using perchloroethylene solvent
GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing
GB/T 8630 Textiles - Determination of dimensional change in washing and drying
GB/T 14644 Textiles - Burning behaviour - 45° test determination of flame spread rate
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 15557 Standard terminology relating to apparel
GB/T 18132 Silk garments
GB 18401 National general safety technical code for textile products
GB/T 21294-2024 Testing methods of physical and chemical performance of garments
GB/T 21295-2014 Requirements of physical and chemical performance of garments
GB/T 23319.3-2010 Textiles - Determination of spirality after laundering - Part 3: Woven and knitted garments
GB/T 24121 Textile products - Determination of the remains of broken sewing needle
GB/T 29778 Textiles - Tests for color fastness - Assessment of the potential to phenolic yellowing of materials
GB/T 29862 Textiles - Identification of fiber content
GB 31701 Safety technical code for infants and children textile products
GB/T 31907 Method of garment measurement
FZ/ T 80002 Marking, packaging, transportation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
FZ/T 80007.3 Dry wash resistance test method for garments used adhesive interlining
Sample photos of appearance defects on M&F unlined and padded garments and M&F children's unlined garments
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 15557 apply.
4 Requirements
4.1 Instructions for use
4.1.1 The product instructions for use shall meet the requirements in GB/T 5296.4, and those of products for children aged from 3 to 14 shall also meet the requirements in GB 31701. For jumpsuits and dresses, the size designation shall be based on the sizing of tops.
4.1.2 For adult products that do not meet the requirements of Grade 1 but meet the requirements of Grade 2 in terms of burning performance, the warning "Flammable product, use with caution" shall be indicated in the instructions for use.
4.2 Size specifications
4.2.1 Size specification shall be set according to the requirements of GB/T 1335 (all parts).
4.2.2 The specification of the main parts shall be designed according to the relevant requirements of GB/T 1335 (all parts).
4.3 Materials
4.3.1 Raw materials and accessories
The shell and lining shall meet the relevant requirements of this standard. The linings, sewing threads and other accessories used shall be compatible with the shell; buttons, decorative buttons, zippers and other accessories shall be smooth on the surface, free from burrs, defects, flaws, and free from accessible sharp points and sharp edges. Zippers shall engage and operate smoothly.
4.3.2 Filling
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Inspection methods
6 Inspection rules
7 Marking, packaging, transport and storage
FZ/T 81001-2025 Sleepwear
1 Scope
This standard specifies the requirements, inspection methods, inspection rules as well as marking, packaging, transport and storage for sleepwear.
This document applies to sleepwear (including sets) and other indoor home wear garments produced mainly from woven textile fabrics.
This document is not applicable to clothing for infants aged 36 months and below.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 250 Textiles - Tests for colour fastness - Grey scale for assessing change in colour
GB/T 1335 (All parts) Standard sizing systems for garments
GB/T 3921-2008 Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda
GB/T 4802.1-2008 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: circular locus method
GB/T 4841.3 Colour cards of standard depths for dyeing with dyestuffs 2/1, 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for use of products of consumer interest - Part 4: Textiles and apparel
GB/T 5711 Textiles - Tests for color fastness - Color fastness to drycleaning using perchloroethylene solvent
GB/T 8629-2017 Textiles - Domestic washing and drying procedures for textile testing
GB/T 8630 Textiles - Determination of dimensional change in washing and drying
GB/T 14644 Textiles - Burning behaviour - 45° test determination of flame spread rate
GB/T 14801 Test method for skewness and bow in woven and knitted fabrics
GB/T 15557 Standard terminology relating to apparel
GB/T 18132 Silk garments
GB 18401 National general safety technical code for textile products
GB/T 21294-2024 Testing methods of physical and chemical performance of garments
GB/T 21295-2014 Requirements of physical and chemical performance of garments
GB/T 23319.3-2010 Textiles - Determination of spirality after laundering - Part 3: Woven and knitted garments
GB/T 24121 Textile products - Determination of the remains of broken sewing needle
GB/T 29778 Textiles - Tests for color fastness - Assessment of the potential to phenolic yellowing of materials
GB/T 29862 Textiles - Identification of fiber content
GB 31701 Safety technical code for infants and children textile products
GB/T 31907 Method of garment measurement
FZ/ T 80002 Marking, packaging, transportation and storage for garments
FZ/T 80004 Rule for garments delivery inspection
FZ/T 80007.3 Dry wash resistance test method for garments used adhesive interlining
Sample photos of appearance defects on M&F unlined and padded garments and M&F children's unlined garments
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 15557 apply.
4 Requirements
4.1 Instructions for use
4.1.1 The product instructions for use shall meet the requirements in GB/T 5296.4, and those of products for children aged from 3 to 14 shall also meet the requirements in GB 31701. For jumpsuits and dresses, the size designation shall be based on the sizing of tops.
4.1.2 For adult products that do not meet the requirements of Grade 1 but meet the requirements of Grade 2 in terms of burning performance, the warning "Flammable product, use with caution" shall be indicated in the instructions for use.
4.2 Size specifications
4.2.1 Size specification shall be set according to the requirements of GB/T 1335 (all parts).
4.2.2 The specification of the main parts shall be designed according to the relevant requirements of GB/T 1335 (all parts).
4.3 Materials
4.3.1 Raw materials and accessories
The shell and lining shall meet the relevant requirements of this standard. The linings, sewing threads and other accessories used shall be compatible with the shell; buttons, decorative buttons, zippers and other accessories shall be smooth on the surface, free from burrs, defects, flaws, and free from accessible sharp points and sharp edges. Zippers shall engage and operate smoothly.
4.3.2 Filling
Contents of FZ/T 81001-2025
Contents
Foreword I
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Inspection methods
6 Inspection rules
7 Marking, packaging, transport and storage
