Safety code of practice for coating - Safety for electrostatic powder coating process
1 Scope
This document specifies the basic safety requirements for electrostatic powder coating process, such as basic requirements, powder coating equipment and its auxiliary devices, ventilation and purification, storage and transportation of powder paint, and operation and maintenance safety management.
This document is applicable to the design of electrostatic powder coating process and the design, installation, operation, maintenance and management of its equipment, as well as the acceptance of electrostatic powder coating works. It also serves as a reference for fluidized bed electrostatic coating, fluidized bed coating and other fluidized coating methods.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 5083 General rules for designing the production facilities in accordance with safety and health requirements
GB 6514 Safety code of practice for coating - Safety and ventilation for coating process
GB 12158 General guideline for preventing electrostatic accidents
GB 12367 Safety code for painting - Safety for electrostatic spray painting process
GB/T 14441 Safety code for painting - Terminology
GB 14443 Safety code for painting - Safety rules for paint drying oven
GB 14444 Safety code for painting - Safety rules for spraying booth
GB 14773 Safety code for painting - Safety specification for electrostatic spray guns and associated apparatus
GB 15577 Safety regulations for dust explosion prevention and protection
GB 50016 Code for fire protection design of buildings
GB 50058 Code for design of electrical installations in explosive atmospheres
GB 50140 Code for design of extinguisher distribution in buildings
GB 55037 General specification for building fire protection
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 14441 and the following apply.
3.1
powder feeder
device capable of continuously and uniformly feeding powder paint for coating
3.2
powder recovery unit
device for collecting uncoated powder, which is capable of separating the powder and gas and controlling the concentration of powder-containing air at its inlet to be less than 50% of its lower explosion limit
3.3
after filter
device for capturing fine powder which is difficult to be captured by powder recovery unit and making the discharged gas meet the discharge standard
4 Basic requirements
4.1 Range of powder coating area
The range of powder coating area shall cover:
a) powder coating room, powder feeder (including the powder conveying device, powder silo and discharging device of a circulating powder feeder), powder recovery unit, after filter, fan and powder conveying pipeline connected therewith (including an air duct containing powder);
b) an area within 1m outward in all directions at the opening of the powder coating room;
c) places where powder paints are stored on site (which shall meet the requirements of 7.1);
d) areas such as interior of exhaust duct, interior of auxiliary device and its maintenance structure, and other areas where flammable dust clouds or accumulated dust may be generated.
Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Basic requirements 5 Powder coating equipment and its auxiliary devices 6 Ventilation and purification 7 Storage and transportation of powder paint 8 Operation and maintenance safety management Annex A (Informative) Division of hazardous areas of explosive dust environment in various powder coating rooms Annex B (Informative) Calculation method for exhaust air volume (air draught) of electrostatic powder coating room Annex C (Informative) Inspection and cleaning cycles of equipment and appliances
Safety code of practice for coating - Safety for electrostatic powder coating process
1 Scope
This document specifies the basic safety requirements for electrostatic powder coating process, such as basic requirements, powder coating equipment and its auxiliary devices, ventilation and purification, storage and transportation of powder paint, and operation and maintenance safety management.
This document is applicable to the design of electrostatic powder coating process and the design, installation, operation, maintenance and management of its equipment, as well as the acceptance of electrostatic powder coating works. It also serves as a reference for fluidized bed electrostatic coating, fluidized bed coating and other fluidized coating methods.
2 Normative references
The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 5083 General rules for designing the production facilities in accordance with safety and health requirements
GB 6514 Safety code of practice for coating - Safety and ventilation for coating process
GB 12158 General guideline for preventing electrostatic accidents
GB 12367 Safety code for painting - Safety for electrostatic spray painting process
GB/T 14441 Safety code for painting - Terminology
GB 14443 Safety code for painting - Safety rules for paint drying oven
GB 14444 Safety code for painting - Safety rules for spraying booth
GB 14773 Safety code for painting - Safety specification for electrostatic spray guns and associated apparatus
GB 15577 Safety regulations for dust explosion prevention and protection
GB 50016 Code for fire protection design of buildings
GB 50058 Code for design of electrical installations in explosive atmospheres
GB 50140 Code for design of extinguisher distribution in buildings
GB 55037 General specification for building fire protection
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 14441 and the following apply.
3.1
powder feeder
device capable of continuously and uniformly feeding powder paint for coating
3.2
powder recovery unit
device for collecting uncoated powder, which is capable of separating the powder and gas and controlling the concentration of powder-containing air at its inlet to be less than 50% of its lower explosion limit
3.3
after filter
device for capturing fine powder which is difficult to be captured by powder recovery unit and making the discharged gas meet the discharge standard
4 Basic requirements
4.1 Range of powder coating area
The range of powder coating area shall cover:
a) powder coating room, powder feeder (including the powder conveying device, powder silo and discharging device of a circulating powder feeder), powder recovery unit, after filter, fan and powder conveying pipeline connected therewith (including an air duct containing powder);
b) an area within 1m outward in all directions at the opening of the powder coating room;
c) places where powder paints are stored on site (which shall meet the requirements of 7.1);
d) areas such as interior of exhaust duct, interior of auxiliary device and its maintenance structure, and other areas where flammable dust clouds or accumulated dust may be generated.
Contents of GB 15607-2023
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Basic requirements
5 Powder coating equipment and its auxiliary devices
6 Ventilation and purification
7 Storage and transportation of powder paint
8 Operation and maintenance safety management
Annex A (Informative) Division of hazardous areas of explosive dust environment in various powder coating rooms
Annex B (Informative) Calculation method for exhaust air volume (air draught) of electrostatic powder coating room
Annex C (Informative) Inspection and cleaning cycles of equipment and appliances
