Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by and is under the jurisdiction of the Ministry of Emergency Management of the People's Republic of China.
Personal fall protection equipment -
Horizontal lifeline device
1 Scope
This standard specifies the technical requirements, test methods, identification and information provided by the manufacturer of horizontal lifeline devices.
This standard is applicable to horizontal lifeline devices used by operators who are at a level with falling risk and whose weight plus bearing weight is not more than 100kg.
This standard is not applicable to horizontal lifeline devices for firefighting and sports.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6096 Test method for personal fall protection systems
GB/T 10125 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 23469 Personal fall protection equipment - Connectors
GB 24543 Personal fall protection equipment - Lanyards
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
horizontal lifeline device
device consisting of flexible guide rail made of steel wire rope, fiber rope, webbing, etc. or rigid guide rail made of stainless steel, aluminum alloy, etc., which is fixed by two or more anchors, with the horizontal angle of the connecting line between any two anchors not more than 15°, and is used for connecting fall protection equipment and attachments (fixing facilities such as walls, floors and scaffolds)
Note: The horizontal lifeline device is classified by guide rails used into flexible horizontal lifeline device and rigid horizontal lifeline device (Figure 1).
3.2
horizontal lifeline system
system consisting of horizontal lifeline device and other fall protection equipment used together
3.3
end anchor
fixture on buildings or structures for connecting
Note: It is used to connect with the end anchor of the guide rail.
3.4
end anchor connector
component used to connect the guide rail with the end anchor
3.5
intermediate anchor
anchors for fixing guide rails other than the end anchor
3.6
intermediate anchor connector
component used to connect the guide rail with the intermediate anchor
3.7
mobile attachment device
device capable of sliding along a guide rail and used to connect to fall protection equipment
3.8
horizontal lifeline energy absorber
device connected to guide rail or mobile attachment device to absorb impact force when a fall occurs
3.9
maximum arrest force
maximum value of impact force measured at the mobile attachment device during the dynamic test
3.10
maximum arrest load
maximum value of impact force measured at the horizontal lifeline anchor during the dynamic test
3.11
minimum clearance
minimum vertical distance between the lowest falling point of the test object and the highest obstacle on the ground, which is to ensure that the user does not collide with the highest obstacle on the ground during the falling process
Note: see Figure 2.
3.12
fall distance
maximum vertical displacement of the mobile attachment device during the dynamic test on the horizontal lifeline device
3.13
total fall distance
maximum vertical distance from the free fall to the end of the fall of the weight during the dynamic test on the horizontal lifeline system
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Test method
6 Identification
7 Information provided by the manufacturer
Bibliography
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by and is under the jurisdiction of the Ministry of Emergency Management of the People's Republic of China.
Personal fall protection equipment -
Horizontal lifeline device
1 Scope
This standard specifies the technical requirements, test methods, identification and information provided by the manufacturer of horizontal lifeline devices.
This standard is applicable to horizontal lifeline devices used by operators who are at a level with falling risk and whose weight plus bearing weight is not more than 100kg.
This standard is not applicable to horizontal lifeline devices for firefighting and sports.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 6096 Test method for personal fall protection systems
GB/T 10125 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 23469 Personal fall protection equipment - Connectors
GB 24543 Personal fall protection equipment - Lanyards
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
horizontal lifeline device
device consisting of flexible guide rail made of steel wire rope, fiber rope, webbing, etc. or rigid guide rail made of stainless steel, aluminum alloy, etc., which is fixed by two or more anchors, with the horizontal angle of the connecting line between any two anchors not more than 15°, and is used for connecting fall protection equipment and attachments (fixing facilities such as walls, floors and scaffolds)
Note: The horizontal lifeline device is classified by guide rails used into flexible horizontal lifeline device and rigid horizontal lifeline device (Figure 1).
3.2
horizontal lifeline system
system consisting of horizontal lifeline device and other fall protection equipment used together
3.3
end anchor
fixture on buildings or structures for connecting
Note: It is used to connect with the end anchor of the guide rail.
3.4
end anchor connector
component used to connect the guide rail with the end anchor
3.5
intermediate anchor
anchors for fixing guide rails other than the end anchor
3.6
intermediate anchor connector
component used to connect the guide rail with the intermediate anchor
3.7
mobile attachment device
device capable of sliding along a guide rail and used to connect to fall protection equipment
3.8
horizontal lifeline energy absorber
device connected to guide rail or mobile attachment device to absorb impact force when a fall occurs
3.9
maximum arrest force
maximum value of impact force measured at the mobile attachment device during the dynamic test
3.10
maximum arrest load
maximum value of impact force measured at the horizontal lifeline anchor during the dynamic test
3.11
minimum clearance
minimum vertical distance between the lowest falling point of the test object and the highest obstacle on the ground, which is to ensure that the user does not collide with the highest obstacle on the ground during the falling process
Note: see Figure 2.
3.12
fall distance
maximum vertical displacement of the mobile attachment device during the dynamic test on the horizontal lifeline device
3.13
total fall distance
maximum vertical distance from the free fall to the end of the fall of the weight during the dynamic test on the horizontal lifeline system
Contents of GB 38454-2019
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
5 Test method
6 Identification
7 Information provided by the manufacturer
Bibliography
