1 Scope
This Part of GB 6067 specifies the basic safety requirements for the design, manufacture, installation, renovation, maintenance, application, discard and inspection of lifting appliances.
This Part is applicable to the general requirements of overhead travelling and portal bridge cranes, mobile cranes, tower cranes, jib cranes, cable cranes and small light lifting equipment. The requirements for special lifting appliances are provided in other parts of GB 6067.
This Part is not applicable to floating cranes, deck cranes and manned lifting equipment. If no basic safety problems are involved, other lifting appliances may also refer to this Part.
2 Normative References
The following normative documents contain provisions which, through reference in this Part of GB 6067, constitute provisions of this Part. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Contents
Foreword II
1 Scope
2 Normative References
3 Metal Structure
4 Mechanisms and Parts
5 Hydraulic System
6 Electric
7 Control and Operation System
8 Electric Protection
9 Safety Devices
10 Mark, Nameplate, Safety Sign, Limiting Size and Clear Distance of Lifting Appliances
11 Crane Operation Management
12 Selection, Responsibilities and Basic Requirements of Personnel
13 Safety
14 Selection of Lifting Appliances
15 Arrangement of Cranes
16 Installation and Disassembly
17 Operation of Lifting Appliances
18 Inspection, Test, Maintenance and Repair
19 Safety Evaluation for the Operating Conditions of Lifting Appliances
Appendix A (Normative) Arrangement Requirements of Safety Device on Typical Lifting Appliances
References
1 Scope
This Part of GB 6067 specifies the basic safety requirements for the design, manufacture, installation, renovation, maintenance, application, discard and inspection of lifting appliances.
This Part is applicable to the general requirements of overhead travelling and portal bridge cranes, mobile cranes, tower cranes, jib cranes, cable cranes and small light lifting equipment. The requirements for special lifting appliances are provided in other parts of GB 6067.
This Part is not applicable to floating cranes, deck cranes and manned lifting equipment. If no basic safety problems are involved, other lifting appliances may also refer to this Part.
2 Normative References
The following normative documents contain provisions which, through reference in this Part of GB 6067, constitute provisions of this Part. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Contents of GB 6067.1-2010
Contents
Foreword II
1 Scope
2 Normative References
3 Metal Structure
4 Mechanisms and Parts
5 Hydraulic System
6 Electric
7 Control and Operation System
8 Electric Protection
9 Safety Devices
10 Mark, Nameplate, Safety Sign, Limiting Size and Clear Distance of Lifting Appliances
11 Crane Operation Management
12 Selection, Responsibilities and Basic Requirements of Personnel
13 Safety
14 Selection of Lifting Appliances
15 Arrangement of Cranes
16 Installation and Disassembly
17 Operation of Lifting Appliances
18 Inspection, Test, Maintenance and Repair
19 Safety Evaluation for the Operating Conditions of Lifting Appliances
Appendix A (Normative) Arrangement Requirements of Safety Device on Typical Lifting Appliances
References
