"Test of Mechanical Properties of Furniture" (GB/T 10357) is divided into 8 parts:
- Part 1: Strength and Durability of Tables;
- Part 2: Stability of Chairs and Stools;
- Part 3: Strength and Durability of Chairs and Stools;
- Part 4: Stability of Storage Units;
- Part 5: Strength and Durability of Storage Units;
- Part 6: Strength and Durability of Beds;
- Part 7: Stability of Tables;
- Part 8: Stability of Chairs with Tilting or Reclining Mechanisms when Fully Reclined, and Rocking Chairs.
This is Part 6 of GB/T 10357.
1 Scope
This part of GB/T 10357 specifies test methods for the strength and durability of beds.
This part is applicable to various hard-surface beds used in households and hotels. Beds of other types may also be implemented by reference to this part according to their use functions.
2 General Test Conditions
2.1 Specimen
Specimen shall be completely assembled deliverable finished product. Assembling shall be carried out according to the instructions provided along with the product by the manufacturer. Where there are several assembly methods, it shall be assembled and tested with the method which is most unfavorable to the mechanical property inspection and recorded in the inspection report. Where assembling structure is not provided, the assembly method shall be recorded in the inspection report. The connecting piece shall be fastened before the test. Unless specially requested in the manufacturer's instructions, the connecting piece shall not be refastened during the test.
For specimen manufactured with bonding method, it shall be stored for at least 7din normal indoor environment since the manufacturing or assembly and before the test.
The specimen shall be thoroughly inspected before test; attention shall be paid to defects of all components and accessories so as to distinguish the defects caused by test; the dimensions of all components are measured and well recorded so as to determine the permanent deformation caused by test.
Where possible, the test shall be carried out according to the procedures specified in this part, and all tests shall be completed on the same specimen. The test procedure deviating from those specified in this part shall be recorded in the test report.
Foreword I
1 Scope
2 General Test Conditions
3 Test Facilities
4 Test Items and Procedures
5 Evaluation of Test Results
"Test of Mechanical Properties of Furniture" (GB/T 10357) is divided into 8 parts:
- Part 1: Strength and Durability of Tables;
- Part 2: Stability of Chairs and Stools;
- Part 3: Strength and Durability of Chairs and Stools;
- Part 4: Stability of Storage Units;
- Part 5: Strength and Durability of Storage Units;
- Part 6: Strength and Durability of Beds;
- Part 7: Stability of Tables;
- Part 8: Stability of Chairs with Tilting or Reclining Mechanisms when Fully Reclined, and Rocking Chairs.
This is Part 6 of GB/T 10357.
1 Scope
This part of GB/T 10357 specifies test methods for the strength and durability of beds.
This part is applicable to various hard-surface beds used in households and hotels. Beds of other types may also be implemented by reference to this part according to their use functions.
2 General Test Conditions
2.1 Specimen
Specimen shall be completely assembled deliverable finished product. Assembling shall be carried out according to the instructions provided along with the product by the manufacturer. Where there are several assembly methods, it shall be assembled and tested with the method which is most unfavorable to the mechanical property inspection and recorded in the inspection report. Where assembling structure is not provided, the assembly method shall be recorded in the inspection report. The connecting piece shall be fastened before the test. Unless specially requested in the manufacturer's instructions, the connecting piece shall not be refastened during the test.
For specimen manufactured with bonding method, it shall be stored for at least 7din normal indoor environment since the manufacturing or assembly and before the test.
The specimen shall be thoroughly inspected before test; attention shall be paid to defects of all components and accessories so as to distinguish the defects caused by test; the dimensions of all components are measured and well recorded so as to determine the permanent deformation caused by test.
Where possible, the test shall be carried out according to the procedures specified in this part, and all tests shall be completed on the same specimen. The test procedure deviating from those specified in this part shall be recorded in the test report.
Contents of GB/T 10357.6-2013
Foreword I
1 Scope
2 General Test Conditions
3 Test Facilities
4 Test Items and Procedures
5 Evaluation of Test Results
