Standard No.:	GB/T 1048-2005
English Name:	Pipework Components-Definition and Selection of PN
Chinese Name:	管道元件PN(公称压力)的定义和选用
Chinese Classification:	J15    Pipeline fittings
Professional Classification:	GB    National Standard
ICS Classification:	23.040.60 23.040.60    Flanges, couplings and joints 23.040.60
Issued by:	AQSIQ; SAC
Issued on:	2005-01-13
Implemented on:	2005-8-1
Status:	superseded
Superseded by:	GB/T 1048-2019 Pipework components—Definition and selection of nominal pressure
Superseded on:	2019-12-1
Superseding:	GB/T 1048-1990 Nominal pressure for pipe components
Language:	English
File Format:	PDF
Word Count:	1000 words
Price(USD):	60.0
Delivery:	via email in 1 business day

1 Scope This standard specifies the definition and series of PN (nominal pressure). This standard is applicable to pipe components marked with PN and specified in the relevant standard. 2 Definitions PN: It is relevant to the mechanical property and size characteristics of components of the pipe system and is the sign of the combination of letters and figures. It consists of letter PN and dimensionless figures. Note 1: Figures after the letter PN do not stand for measured values, shall not be applied to calculation, unless otherwise stated in the relevant standards. Note 2: Unless related with relevant standards of pipe components, the term PN has no meaning: Note 3: Allowable pressure of pipework components depends on the PN value, materials, design and allowable working temperature of components, allowable pressure is given in the corresponding table of standard pressure temperature level. Note 4: All the pipe components with the same PN and DN values shall have the same matching size with the matchable flange.