1 Scope
This standard specifies the technical requirements, test methods and inspection rules with regards to the dispatching automation system for district power networks.
This standard is applicable to the dispatching automation system for district power networks and used as a reference to the enterprise dispatch automation system of power supply network and other power supply networks and the centralized control system in the transformer substation.
2 Normative References
The following normative documents contain provisions which, through reference in this standard document. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 3873 "General Specifications for Products Packaging of Communication Equipments"
GB/T 9813 "Generic Specification for Microcomputer"
GB/T 13729 "Remote Terminal Unit Equipment"
GBJ 50174 "Design Code for Electronic Computer Room"
DL/T 630 "Technical Requirement for RTU with A. C. Electrical Quantities Input Discrete Sampling"
IEC 60870-5 (all parts) "Telecontrol Equipment and Systems - Part 5: Transmission Protocol
IEC 60870-6 (all parts) "Telecontrol Protocol Compatible with ISO Standards and ITU-T Recommendations - TASE 2 Object Models"
IEC 61850 (all parts) "Communication Networks and Systems in Substations"
3 General Requirements
3.1 Working conditions and ambient conditions
3.1.1 Working conditions at master station
The computer at the master station (dispatching end) shall work normally at the conditions below:
Foreword I
1 Scope
2 Normative References
3 General Requirements
4 Function of Supervisory Control and Data Acquisition (SCADA)1)
5 Real-time Network Analysis Function
6 Functions of dispatcher training simulator (DTS)
7 Test Method
8 Inspection Rules
9 Marking, Packing, Transport and Storage
Appendix A (Informative) Supervisory Control and Data Acquisition Function Test
Appendix B (Informative) Real-time Network Analysis Function Test
Appendix C (Normative) Standard Network Model for Testing the Real-time Network Analysis Function
Appendix D (Normative) Scope and Directions of Data Acquisition for Real-time Network Analysis
Appendix E (Informative) Test of Dispatcher Training Simulator
1 Scope
This standard specifies the technical requirements, test methods and inspection rules with regards to the dispatching automation system for district power networks.
This standard is applicable to the dispatching automation system for district power networks and used as a reference to the enterprise dispatch automation system of power supply network and other power supply networks and the centralized control system in the transformer substation.
2 Normative References
The following normative documents contain provisions which, through reference in this standard document. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
GB/T 3873 "General Specifications for Products Packaging of Communication Equipments"
GB/T 9813 "Generic Specification for Microcomputer"
GB/T 13729 "Remote Terminal Unit Equipment"
GBJ 50174 "Design Code for Electronic Computer Room"
DL/T 630 "Technical Requirement for RTU with A. C. Electrical Quantities Input Discrete Sampling"
IEC 60870-5 (all parts) "Telecontrol Equipment and Systems - Part 5: Transmission Protocol
IEC 60870-6 (all parts) "Telecontrol Protocol Compatible with ISO Standards and ITU-T Recommendations - TASE 2 Object Models"
IEC 61850 (all parts) "Communication Networks and Systems in Substations"
3 General Requirements
3.1 Working conditions and ambient conditions
3.1.1 Working conditions at master station
The computer at the master station (dispatching end) shall work normally at the conditions below:
Contents of GB/T 13730-2002
Foreword I
1 Scope
2 Normative References
3 General Requirements
4 Function of Supervisory Control and Data Acquisition (SCADA)1)
5 Real-time Network Analysis Function
6 Functions of dispatcher training simulator (DTS)
7 Test Method
8 Inspection Rules
9 Marking, Packing, Transport and Storage
Appendix A (Informative) Supervisory Control and Data Acquisition Function Test
Appendix B (Informative) Real-time Network Analysis Function Test
Appendix C (Normative) Standard Network Model for Testing the Real-time Network Analysis Function
Appendix D (Normative) Scope and Directions of Data Acquisition for Real-time Network Analysis
Appendix E (Informative) Test of Dispatcher Training Simulator
