1 Scope
This standard specifies the classification, specification and test method for road traffic markings.
This standard is applicable to the traffic markings on roads at all levels in China, and the traffic markings arranged on roads at airport, port, factory and mine, residential district, etc. may also refer to the provisions of this standard.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB 5768.3 Road Traffic Signs and Markings - Part 3: Road Traffic Markings
GB/T 21383 Coefficient of Initial Retroreflected Luminance of Newly Applied Pavement Marking and Test Method (GB/T 21383-2008, ASTM D 6359-1999, NEQ)
GB/T 24717 Preformed Pavement Marking Tape
GB/T 24722 Glass Beads for Road Markings
JT/T 280 Pavement Marking Paint
JT/T 612 ) Retroreflectometer
JT/T 675 Comb Gauge for Wet-film Thickness Of Road Traffic Marking Coat
JT/T 688 Retroreflection Vocabulary
JT/T 690 Test Method for Photometric Characteristics of Retroreflectors
JT/T 691 Test Method for Coefficient of Retroreflected Luminance of Horizontal Coatings
JT/T 692 Test method for Colorimetric Characteristics of Retroeflectors under Nighttime Conditions
JT/T 712 Pavement Antiskid Paint
3 Terms and Definitions
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Marking Classification
5 Specification
6 Test Methods
Annex A (Normative) Measurement Method for Thickness of Formed Marking
1 Scope
This standard specifies the classification, specification and test method for road traffic markings.
This standard is applicable to the traffic markings on roads at all levels in China, and the traffic markings arranged on roads at airport, port, factory and mine, residential district, etc. may also refer to the provisions of this standard.
2 Normative References
The following documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB 5768.3 Road Traffic Signs and Markings - Part 3: Road Traffic Markings
GB/T 21383 Coefficient of Initial Retroreflected Luminance of Newly Applied Pavement Marking and Test Method (GB/T 21383-2008, ASTM D 6359-1999, NEQ)
GB/T 24717 Preformed Pavement Marking Tape
GB/T 24722 Glass Beads for Road Markings
JT/T 280 Pavement Marking Paint
JT/T 612 ) Retroreflectometer
JT/T 675 Comb Gauge for Wet-film Thickness Of Road Traffic Marking Coat
JT/T 688 Retroreflection Vocabulary
JT/T 690 Test Method for Photometric Characteristics of Retroreflectors
JT/T 691 Test Method for Coefficient of Retroreflected Luminance of Horizontal Coatings
JT/T 692 Test method for Colorimetric Characteristics of Retroeflectors under Nighttime Conditions
JT/T 712 Pavement Antiskid Paint
3 Terms and Definitions
Contents of GB/T 16311-2009
Foreword I
1 Scope
2 Normative References
3 Terms and Definitions
4 Marking Classification
5 Specification
6 Test Methods
Annex A (Normative) Measurement Method for Thickness of Formed Marking
