GB/T 18262-2024 Wood based panel machinery - General specifications
1 Scope
This document specifies the requirements for the design, manufacturing, performance, inspection rules, marking, packaging and storage of wood based panel machinery (hereinafter referred to as the machinery), and describes the corresponding inspection methods.
This document is applicable to the machinery used for producing wood based panel products such as plywood, particleboard and fiberboard, as well as machinery for secondary processing of these products.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 150.1 Pressure vessels - Part 1: General requirements
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 3766 Hydraulic fluid power - General rules and safety requirements for systems and their components
GB/T 4272 General principles for thermal insulation technique of equipment and pipes
GB/T 5226.1 Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6414 Castings - Dimensional tolerances and geometrical tolerances and machining allowances
GB/T 6576 Machine tools - Lubrication systems
GB/T 7932 Pneumatic fluid power - General rules and safety requirements for systems and their components
GB 8978 Integrated wastewater discharge standard
GB/T 9061-2006 General specifications for metal-cutting machine tools
GB/T 9239.1 Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances
GB/T 9439 Grey iron castings
GB/T 9969 General principles for preparation of instructions for use of industrial products
GB/T 10217 Design guide of the outline and structure for the electric control equipment
GB/T 10961 Woodworking machines - Symbols for indications
GB/T 12361 General specification of steel die forgings
GB/T 13306 Plates
GB/T 13384 General specifications for packing of mechanical and electrical product
GB/T 14436 General principles of industrial product guarantee documents
GB/T 14775 General ergonomics requirements for controller
GB/T 14776 Ergonomics - Principles for determining dimensions of work places in manufacturing areas and the dimensions
GB 16297 Integrated emission standard of air pollutants
GB/T 16754 Safety of machinery - Emergency stop function - Principles for design
GB/T 16768 Metal-cutting machine tools - Measurement method for vibration
GB/T 16923 Normalizing and annealing of steel parts
GB/T 16924 Quenching and tempering of steel parts
GB/T 18003 Wood based panel machinery - Types organization method
GB/T 18514 Safety code for wood-based panel machinery
GB/T 18263 Wood-based panel machinery - Hot press for terminology
GB 18613-2020 Minimum allowable values of energy efficiency and values of efficiency grades for motors
GB/T 18831 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
GB/T 23571 Metal cutting machine tools - Technical document compiled
GB/T 26802.1 Industrial control computer system - General specification - Part 1: General requirements
GB/T 28618 Remanufacturing - General technical requirements for mechanical products
GB/T 30571 General specifications of sheet metal stamping parts
GB/T 32666.1 High-grade and popular numerical control system of machine tool - Part 1: Requirements and verification specifications for numerical control device
GB/T 33008.1 Industrial automation and control system security - Programmable logic controller (PLC) - Part 1: System requirements
GB/T 33212 Steel open die forgings on hammer - General specifications
GB/T 35978 Remanufacturing - Technical specifications for inspection of mechanical products
GB 50093 Code for construction and quality acceptance of automation instrumentation engineering
GBZ 125 Radiological protection requirements for gauges containing sealed radioactive source
GBZ/T 192.1 Determination of dust in the air of workplace - Part 1: Total dust concentration
AQ 3009 Safety criterion for electrical apparatus in hazardous areas
AQ 4228-2012 Safety code for dust explosion prevention in wood processing systems
JB/T 5062 Information display equipment - The general require of man-machine engineering
JB/T 5994 General technical requirements for assembly
JB/T 7711 Heat treatment of grey cast iron
JB/T 8828 Common specification for cutting
JB/T 9953 Woodworking machines - Measurement of sound pressure level
JB/T 12384 Electrical control systems for machine tool - Technical specifications of cabinet
LY/T 1382 Wood-based panel machinery - Classified vocabulary
LY/T 1454 Test code for accuracy of wood based panel machinery
LY/T 1806 Code for design of dust collecting (pneumatic conveying) system in woodworking processing
LY/T 1862 Technical specification for energy conservation of pneumatic conveying and dust removal systems in woodworking industry
LY/T 2002 Generality to acceptance of dust collecting and pneumatic conveying systems in woodworking industry
QB/T 1588.1 Light industry machinery - General specification for welding parts
QB/T 1588.2 Light industry machinery - General specification for cutting
QB/T 1588.4 Light industry machinery - General specification for products painting
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 18263 and LY/T 1382 apply.
4 Requirements
4.1 General requirements
4.1.1 Types, names and parameters
The types, names and parameters shall meet the requirements of GB/T 18003.
4.1.2 Design requirements
4.1.2.1 The overall layout shall be reasonable and compact, the dimensions of the work posts shall be designed according to the principles specified in GB/T 14776, and the layout shall be convenient for the operator to observe the working conditions of the machinery.
4.1.2.2 The structural design shall be economical and rational, and should give full consideration to serialization, generalization, standardization and modularization, as well as the design principles of safety, hygiene and energy conservation specified in GB 5083 and GB/T 40808.1.
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Inspection methods
6 Inspection rules
7 Marking, packaging and storage
Bibliography
GB/T 18262-2024 Wood based panel machinery - General specifications
1 Scope
This document specifies the requirements for the design, manufacturing, performance, inspection rules, marking, packaging and storage of wood based panel machinery (hereinafter referred to as the machinery), and describes the corresponding inspection methods.
This document is applicable to the machinery used for producing wood based panel products such as plywood, particleboard and fiberboard, as well as machinery for secondary processing of these products.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 150.1 Pressure vessels - Part 1: General requirements
GB/T 191 Packaging - Pictorial marking for handling of goods
GB/T 3766 Hydraulic fluid power - General rules and safety requirements for systems and their components
GB/T 4272 General principles for thermal insulation technique of equipment and pipes
GB/T 5226.1 Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6414 Castings - Dimensional tolerances and geometrical tolerances and machining allowances
GB/T 6576 Machine tools - Lubrication systems
GB/T 7932 Pneumatic fluid power - General rules and safety requirements for systems and their components
GB 8978 Integrated wastewater discharge standard
GB/T 9061-2006 General specifications for metal-cutting machine tools
GB/T 9239.1 Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances
GB/T 9439 Grey iron castings
GB/T 9969 General principles for preparation of instructions for use of industrial products
GB/T 10217 Design guide of the outline and structure for the electric control equipment
GB/T 10961 Woodworking machines - Symbols for indications
GB/T 12361 General specification of steel die forgings
GB/T 13306 Plates
GB/T 13384 General specifications for packing of mechanical and electrical product
GB/T 14436 General principles of industrial product guarantee documents
GB/T 14775 General ergonomics requirements for controller
GB/T 14776 Ergonomics - Principles for determining dimensions of work places in manufacturing areas and the dimensions
GB 16297 Integrated emission standard of air pollutants
GB/T 16754 Safety of machinery - Emergency stop function - Principles for design
GB/T 16768 Metal-cutting machine tools - Measurement method for vibration
GB/T 16923 Normalizing and annealing of steel parts
GB/T 16924 Quenching and tempering of steel parts
GB/T 18003 Wood based panel machinery - Types organization method
GB/T 18514 Safety code for wood-based panel machinery
GB/T 18263 Wood-based panel machinery - Hot press for terminology
GB 18613-2020 Minimum allowable values of energy efficiency and values of efficiency grades for motors
GB/T 18831 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
GB/T 23571 Metal cutting machine tools - Technical document compiled
GB/T 26802.1 Industrial control computer system - General specification - Part 1: General requirements
GB/T 28618 Remanufacturing - General technical requirements for mechanical products
GB/T 30571 General specifications of sheet metal stamping parts
GB/T 32666.1 High-grade and popular numerical control system of machine tool - Part 1: Requirements and verification specifications for numerical control device
GB/T 33008.1 Industrial automation and control system security - Programmable logic controller (PLC) - Part 1: System requirements
GB/T 33212 Steel open die forgings on hammer - General specifications
GB/T 35978 Remanufacturing - Technical specifications for inspection of mechanical products
GB 50093 Code for construction and quality acceptance of automation instrumentation engineering
GBZ 125 Radiological protection requirements for gauges containing sealed radioactive source
GBZ/T 192.1 Determination of dust in the air of workplace - Part 1: Total dust concentration
AQ 3009 Safety criterion for electrical apparatus in hazardous areas
AQ 4228-2012 Safety code for dust explosion prevention in wood processing systems
JB/T 5062 Information display equipment - The general require of man-machine engineering
JB/T 5994 General technical requirements for assembly
JB/T 7711 Heat treatment of grey cast iron
JB/T 8828 Common specification for cutting
JB/T 9953 Woodworking machines - Measurement of sound pressure level
JB/T 12384 Electrical control systems for machine tool - Technical specifications of cabinet
LY/T 1382 Wood-based panel machinery - Classified vocabulary
LY/T 1454 Test code for accuracy of wood based panel machinery
LY/T 1806 Code for design of dust collecting (pneumatic conveying) system in woodworking processing
LY/T 1862 Technical specification for energy conservation of pneumatic conveying and dust removal systems in woodworking industry
LY/T 2002 Generality to acceptance of dust collecting and pneumatic conveying systems in woodworking industry
QB/T 1588.1 Light industry machinery - General specification for welding parts
QB/T 1588.2 Light industry machinery - General specification for cutting
QB/T 1588.4 Light industry machinery - General specification for products painting
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 18263 and LY/T 1382 apply.
4 Requirements
4.1 General requirements
4.1.1 Types, names and parameters
The types, names and parameters shall meet the requirements of GB/T 18003.
4.1.2 Design requirements
4.1.2.1 The overall layout shall be reasonable and compact, the dimensions of the work posts shall be designed according to the principles specified in GB/T 14776, and the layout shall be convenient for the operator to observe the working conditions of the machinery.
4.1.2.2 The structural design shall be economical and rational, and should give full consideration to serialization, generalization, standardization and modularization, as well as the design principles of safety, hygiene and energy conservation specified in GB 5083 and GB/T 40808.1.
Contents of GB/T 18262-2024
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Inspection methods
6 Inspection rules
7 Marking, packaging and storage
Bibliography
