2023-3-31 3.238.250.73
Code of China Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/GB/T 223.11-2008
GB/T 223.11-2008   Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method (English Version)
Standard No.: GB/T 223.11-2008 Status:valid remind me the status change

Email:

Language:English File Format:PDF
Word Count: 6000 words Price(USD):80.0 remind me the price change

Email:

Implemented on:2009-5-1 Delivery: via email in 1 business day
,,
Standard No.: GB/T 223.11-2008
English Name: Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method
Chinese Name: 钢铁及合金 铬含量的测定 可视滴定或电位滴定法
Chinese Classification: H11    Steel and iron alloy analysis method
Professional Classification: GB    National Standard
Issued by: AQSIQ, SAC
Issued on: 2008-09-11
Implemented on: 2009-5-1
Status: valid
Superseding:GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy - ammonium sulfate oxidation volumetric method for the determination of chromium content
Language: English
File Format: PDF
Word Count: 6000 words
Price(USD): 80.0
Delivery: via email in 1 business day
1 Scope This Part of GB/T 223 specifies the determination of chromium content with visual titration or potentiometric titration method. Method I of this Part is applicable to the determination of chromium content with mass fraction 0.10%~35.00% in pig iron, carbon steel, alloy steel, high-temperature alloy and precision alloy; method II of this Part is applicable to the determination of chromium content with mass fraction 0.25%~35.00% in iron and steel. 2 Normative References The following standards contain provisions which, through reference in this Part of GB/T 223, constitute provisions of this Part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents Foreword i 1 Scope 2 Normative References 3 Method I Visual Titration Method 4 Method II Potentiometric Titration Method 5 Test Report Annex A (Informative) Method I Source Data of Common Precision Test Annex B (Informative) Method II Additional Information of International Cooperation Test Annex C (Informative) Method II Diagram of Precision Data
Referred in GB/T 223.11-2008:
*GB/T 223.13-2000 Methods for chemical analysis of iron, steel and alloy-The ammonium ferrous sulfate titration method for the determination of vanadium content
*GB/T 223.14-2000 Methods for Chemical Analysis of Iron, Steel and Alloy - The N-Benzoy-N-Phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content
*GB/T 223.76-1994 Methods for chemical analysis of iron, steel and alloy The flame atomic absorption spectrometric method for the determination of vanadium content
*GB/T 6379.1-2004 Accuracy(trueness and precision) of measurement methods and results - Part 1: General principles and definitions
*GB/T 6379.2-2004 Accuracy (trueness and precision) ofmeasurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
*GB 12805-
*GB 12806-
*GB 12808-
*GB/T 20066-2006 Steel and Iron-Sampling and Preparation of Samples for the Determination of Chemical Composition
*GB/T 20125-2006 Low-alloy steel - Determination of multi-element contents - Inductively coupled plasma atomic emission spectrometric method
GB/T 223.11-2008 is referred in:
* GB 713-2008 Steel Plates for Boilers and Pressure Vessels
* GB/T 3274-2007 Hot-rolled plates and strips of carbon structural steels and high strength low alloy structural steels
* GB/T 700-2006 Carbon structural steels
* GB/T 13793-2008 Steel Pipes with a Longitudinal Electric (Resistance) Weld
* GB/T 20065-2006 Screw-thread steel bars for the prestressing of concrete
* GB 912-2008 Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
* GB/T 710-2008 Hot-rolled quality carbon structural steel sheets and strips
* GB/T 8749-2008 Hot-rolled quality carbon structural steel strips
* GB 3531-2008 Low alloy steel plates for low temperature pressure vessels
* GB 3531-2008/XG1-2012 Low alloy steel plates for low temperature pressure vessels
* GB 13296-2007 Seamless stainless steel Tubes for Boiler and Heat Exchanger
* GB 713-2014 Steel plates for boilers and pressure vessels
* GB/T 14976-2012 Seamless stainless steel pipes for fluid transport
* GB/T 4171-2008 Atmospheric corrosion resisting structural steel
* GB 1499.2-2007 Steel for the Reinforcement of Concrete - Part 2: Hot Rolled Ribbed Bars
* GB 1499.2-2007/XG1-2009 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
* GB/T 11263-2005 The Hot-rolled H and Cut T Section
* GB/T 14976-2002 Stainless Steel Seamless Tubes for Fluid Transport
* GB/T 3091-2008 Welded Steel Pipes for Low Pressure Liquid Delivery
* GB/T 8163-2008 Seamless steel tubes for liquid service
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 1222-2007 Spring steels
* GB/T 18983-2003 Oil - Hardened and tempered stell wire for mechanical springs
* GB/T 11253-2007 Cold-rolled sheets and strips of carbon structural steels
* GB/T 5216-2004 Structural steels subject to end-quench hardenability requirments
* GB/T 8162-2008 Seamless Steel Tubes for Structural Purposes
* JB/T 4385.1-1999 General specifications for open die forgings on hammer
* GB 713-2014 Steel plates for boilers and pressure vessels
* GB 30584-2014 Seamless Steel Pipes for Crane Jib
* GB 9948-2013 Seamless steel tubes for petroleum cracking
* GB 713-2014 Steel plates for boilers and pressure vessels
* GB 713-2014 Steel plates for boilers and pressure vessels
* GB 30584-2014 Seamless Steel Pipes for Crane Jib
* GB 713-2014 Steel plates for boilers and pressure vessels
* GB 30584-2014 Seamless Steel Pipes for Crane Jib
* GB 9948-2013 Seamless steel tubes for petroleum cracking
* GB/T 3280-2007/XG1-2012 Cold rolled stainless steel plate, sheet and strip
* GB/T 14976-2012 Seamless stainless steel pipes for fluid transport
* GB 3531-2008/XG1-2012 Low alloy steel plates for low temperature pressure vessels
* GB/T 5680-2010 Austenitic manganese steel castings
* GB/T 4240-2009 Stainless steel wires
* GB 3531-2008 Low alloy steel plates for low temperature pressure vessels
* GB 912-2008 Hot-rolled sheets and strips of carbon structural steels and high strength low alloy structural steels
* GB 5310-2008 Seamless Steel Tubes and Pipes for High Pressure Boiler
* GB/T 710-2008 Hot-rolled quality carbon structural steel sheets and strips
* GB 1499.2-2007/XG1-2009 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
* GB/T 711-2008 Hot-rolled Quality Carbon Structural Steel Plates, Sheets and Wide Strips
* GB/T 4171-2008 Atmospheric corrosion resisting structural steel
* GB/T 8162-2008 Seamless Steel Tubes for Structural Purposes
* GB/T 8163-2008 Seamless steel tubes for liquid service
* GB/T 3091-2008 Welded Steel Pipes for Low Pressure Liquid Delivery
* GB/T 8749-2008 Hot-rolled quality carbon structural steel strips
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 12771-2008 Welded stainless steel pipes for liquid delivery
* GB/T 13793-2008 Steel Pipes with a Longitudinal Electric (Resistance) Weld
* GB/T 3091-2008 Welded Steel Pipes for Low Pressure Liquid Delivery
* GB/T 8749-2008 Hot-rolled quality carbon structural steel strips
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 12771-2008 Welded stainless steel pipes for liquid delivery
* GB/T 13793-2008 Steel Pipes with a Longitudinal Electric (Resistance) Weld
* GB 713-2008 Steel Plates for Boilers and Pressure Vessels
* GB/T 11263-2005 The Hot-rolled H and Cut T Section
* GB/T 5216-2004 Structural steels subject to end-quench hardenability requirments
* GB/T 18983-2003 Oil - Hardened and tempered stell wire for mechanical springs
* GB/T 14976-2002 Stainless Steel Seamless Tubes for Fluid Transport
* GB/T 18254-2002 High-carbon chromium bearing steel
* JB/T 4385.1-1999 General specifications for open die forgings on hammer
* GB/T 4237-2007 Hot Rolled Stainless Steel Plate, Sheet and Strip
* GB/T 18254-2002 High-carbon chromium bearing steel
* GB/T 4171-2008 Atmospheric corrosion resisting structural steel
* GB/T 1220-2007 Stainless steel bars
* GB/T 4237-2007 Hot Rolled Stainless Steel Plate, Sheet and Strip
* GB/T 3078-2008 Quality structural steel cold drawn bars
* GB/T 8749-2008 Hot-rolled quality carbon structural steel strips
* GB/T 20564.6-2010 Continuously cold rolled high strength steel sheet and strip for automobile—Part 6:Transformation induced plasticity steel
* GB/T 18983-2003 Oil - Hardened and tempered stell wire for mechanical springs
* GB 30584-2014 Seamless Steel Pipes for Crane Jib
* GB/T 18254-2002 High-carbon chromium bearing steel (including Amendment 1)
* GB/T 4697-2008 Hot-rolled U-type steel for mine timbering
* NB/T 47018.5-2011 Technical permission of welding materials for pressure equipment - Part 5: Stainless steel strip electrodes and fluxes for overlay welding
* GB/T 19345-2003 Amorphous and nanocrystalline soft magnetic alloy strips
* GB 713-2014 Steel plates for boilers and pressure vessels
* GB/T 1220-2007 Stainless steel bars
* GB/T 24593-2009 Welded austenitic stainless steel tubes for boiler and heat-exchanger
* GB/T 6725-2002 Cold Formed Steel Sections
* GB/T 12770-2002 Welded Stainless Steel Tubes for Machine Structures
* GB/T 3091-2008 Welded Steel Pipes for Low Pressure Liquid Delivery
* GB/T 700-2006 Carbon structural steels
* GB 1499.2-2007 Steel for the Reinforcement of Concrete - Part 2: Hot Rolled Ribbed Bars
* GB 1499.2-2007/XG1-2009 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
* GB 9948-2006 Seamless steel tubes for petroleum cracking
* GB/T 8163-2008 Seamless steel tubes for liquid service
* GB/T 12771-2008 Welded stainless steel pipes for liquid delivery
* GB 5310-2008 Seamless Steel Tubes and Pipes for High Pressure Boiler
* GB 5310-2008 Seamless Steel Tubes and Pipes for High Pressure Boiler
* GB/T 8162-2008 Seamless Steel Tubes for Structural Purposes
* GB/T 8162-2008 Seamless Steel Tubes for Structural Purposes
* GB/T 21833-2008 Austenitic - Ferritic (duplex) grade stainless steel seamless tubes and pipes
* GB/T 1298-2008 Carbon Tool Steels
* GB/T 8731-2008 Free-cutting structural steel
* GB 24511-2009 Stainless steel plate,sheet and strip for pressure equipments
* YB/T 5092-2005 Stainless steel wires for welding
* GB/T 24186-2009 High strength abrasion resistant steel plates for construction machine
* GB/T 5216-2014 Structural steels with specified hardenability bands
* YB/T 4149-2006 Continuously cast ruond billet for seamless steel tube rolling
* GB/T 26653-2011 Exhaust manifold iron castings
* GB/T 14975-2012 Seamless stainless steel tubes for structure
* GB/T 1221-2007 Heat-resistant steel bars
* GB 13296-2013 Seamless stainless steel tubes for boiler and heat exchanger
* GB/T 25825-2010 Rolls for hot strip mill and plate mill
* GB/T 4237-2015 Hot rolled stainless steel plate,sheet and strip
* GB/T 3280-2015 Cold rolled stainless steel plate, sheet and strip
* NB/T 20009.1-2010 Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 1: Carbon Steel Covered Electrodes for Classes 1, 2, 3 Components
* GB/T 9943-2008 High-speed tool steels
* GB/T 3091-2015 Welded steel pipes for low pressure liquid delivery
* GB/T 24588-2009 Stainless steel wires for spring
* GB/T 6478-2015 Steels for cold heading and cold extruding
* YB/T 5311-2010 Carbon spring steel wire for significant use
* GB/T 699-2015 Quality carbon structural steels
* GB/T 8732-2004 Steels of blade for steam turbine
* GB/T 3077-2015 Alloy structure steels
* NB/T 20009.7-2012 Welding Material for Pressurized Water Reactor Nuclear Power Plants-Part 7: Stainless Steel Wires and Filler Rods for Classes 1, 2, 3 Components
* DL/T 680-2015 Specification for electric power industry wear-resistant pipes
* DL/T 681-2012 Specification for Wear Resistant Parts of Coal Mill in Coal-fired Power Plants
* GB/T 21237-2007 Wide and heavy plates for line pipe of petroleum and natural gas
* YB/T 5055-2014 Crane rails
* GB/T 3524-2015 Hot-rolled carbon and low alloy structural steel strips
* GB/T 1299-2014 Tool and mould steels
*GB/T 19879-2005 Steel plates for building structure
*GB/T 3429-2002 Wire rod for electrode
*GB/T 4171-2000 Superior atmospheric corrosion resisting structural steel
*TB/T 46-2015 Railway Vehicle Center Plate
*YB/T 5058-2005 Cold-rolled spring and tool steel strips
*GB/T 13793-2016 Straight seam welded steel pipe
*GB/T 21832-2008 Austenitic - Ferritic (duplex) grade stainless steel welded tubes and pipes
*GB/T 1504-2008 Cast iron rolls
*GB/T 18254-2016 High-carbon chromium bearing steel
*GB/T 29601-2013 Stainless steel ware
*YB/T 4155-2006 Hot-rolled round carbon steel bars and rods for standard parts
*GB/T 32389-2015 Utensils for baking food
*GB/T 24593-2018 Welded austenitic stainless steel tubes for boiler and heat exchanger
*GB/T 35840.1-2018 Steels for plastic mould―Part 1:Non-alloy steels
*GB/T 34484.1-2017 Heat-treatable steels - Part 1: Non-alloy steels
*GB/T 1234-2012 High resistance alloys for electrical heating
*GB/T 8163-2018 Seamless steel pipes for liquid service
*GB/T 4240-2019 Stainless steel wires
*GB/T 19879-2015 Steel plates for building structure
*YB/T 091-2005 Forging(rolling) steel grinding balls
*GB/T 33954-2017 Hot-rolled wire rod for quenched and tempered spring steel wires
*GB/T 26075-2019 Steel bars for sucker rods
*GB/T 14986-2008 High saturation magnetic induction magnetic compensate alloys depending on temperature variation corrosion-resisting iron-aluminium Permanent permeability soft magneticalloys
*YB/T 4641-2018 Cryogenic ribbed bars for the reinforced concrete tanks of LNG
*GB/T 20564.12-2019 Continuously cold rolled high strength steel sheet and strip for automobile-Part 12:Dual phase steel with high formability
*GB/T 2520-2017 Cold-reduced electrolytic tinplate [Steel-plate & steel-strip]
*GB/T 3089-2020 Seamlless ultra-thin wall stainless steel tubes
*GB/T 34484.2-2018 Heat-treatable steels—Part 2:Alloy steels for quenching and tempering
*GB/T 18579-2019 High-carbon chromium bearing steel wires
*YB/T 5231-2014 Sealed iron-nickel-cobalt alloys with pe rmanent expansion
*YB/T 4470-2015 Standard specification for stainless steel rope wire
*GB/T 24588-2019 Stainless steel spring wires
*GB/T 4232-2019 Stainless steel wire for cold heading and cold forging
*YB/T 5209-2020 Electric-welded steel tubes for cardan shaft
Code of China
Standard
GB/T 223.11-2008  Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method (English Version)
Standard No.GB/T 223.11-2008
Statusvalid
LanguageEnglish
File FormatPDF
Word Count6000 words
Price(USD)80.0
Implemented on2009-5-1
Deliveryvia email in 1 business day
Detail of GB/T 223.11-2008
Standard No.
GB/T 223.11-2008
English Name
Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method
Chinese Name
钢铁及合金 铬含量的测定 可视滴定或电位滴定法
Chinese Classification
H11
Professional Classification
GB
ICS Classification
Issued by
AQSIQ, SAC
Issued on
2008-09-11
Implemented on
2009-5-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy - ammonium sulfate oxidation volumetric method for the determination of chromium content
Language
English
File Format
PDF
Word Count
6000 words
Price(USD)
80.0
Keywords
GB/T 223.11-2008, GB 223.11-2008, GBT 223.11-2008, GB/T223.11-2008, GB/T 223.11, GB/T223.11, GB223.11-2008, GB 223.11, GB223.11, GBT223.11-2008, GBT 223.11, GBT223.11
Introduction of GB/T 223.11-2008
1 Scope This Part of GB/T 223 specifies the determination of chromium content with visual titration or potentiometric titration method. Method I of this Part is applicable to the determination of chromium content with mass fraction 0.10%~35.00% in pig iron, carbon steel, alloy steel, high-temperature alloy and precision alloy; method II of this Part is applicable to the determination of chromium content with mass fraction 0.25%~35.00% in iron and steel. 2 Normative References The following standards contain provisions which, through reference in this Part of GB/T 223, constitute provisions of this Part. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards. For undated references, the latest edition of the normative document referred to applies.
Contents of GB/T 223.11-2008
Contents Foreword i 1 Scope 2 Normative References 3 Method I Visual Titration Method 4 Method II Potentiometric Titration Method 5 Test Report Annex A (Informative) Method I Source Data of Common Precision Test Annex B (Informative) Method II Additional Information of International Cooperation Test Annex C (Informative) Method II Diagram of Precision Data
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: Foryou Tech Co., Ltd. 2008-2040
 
 
Keywords:
GB/T 223.11-2008, GB 223.11-2008, GBT 223.11-2008, GB/T223.11-2008, GB/T 223.11, GB/T223.11, GB223.11-2008, GB 223.11, GB223.11, GBT223.11-2008, GBT 223.11, GBT223.11