Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 22842-2009 Lining Fabrics; the following technical changes have been made with respect to GB/T 22842-2009 (the previous edition):
——The fixed load of slippage is adjusted (see Table 1 in 4.5.1; Table 1 in 4.5.1, Edition 2009);
——The index value of tear strength of cuprammonjum fiber lining fabrics is adjusted (see Table 2 in 4.5.2; Table 2 in 4.5.2, Edition 2009);
——The index values of tear strength of polyester fiber/ viscose fiber and polyester fiber/ cuprammonjum fiber lining fabrics are adjusted (see Table 3 in 4.5.3; Table 3 in 4.5.3, Edition 2009);
——As for dyeing standard of dye, it is changed to be darker than 1/12 of the standard darkness in GB/T 4841.3 for dark color and lighter than or equal to such value for light color (see Table 1 in 4.5.1, Table 2 in 4.5.2 and Table 3 in 4.5.3; Table 1 in 4.5.1, Table 2 in 4.5.2 and Table 3 in 4.5.3 of Edition 2009).
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of SAC/TC 401 National Technical Committee on Silk Standardization Administration of China.
The previous edition of this standard is as follows:
——GB/T 22842-2009.
Lining Fabrics
1 Scope
This standard specifies terms and definitions, requirements, test methods, inspection rules as well as packaging and marking of lining fabrics.
This standard is applicable to assessment of the quality of lining fabrics made from filament yarn of polyester fiber, polyamide fiber, cellulose acetate fiber, viscose fiber or cuprammonjum fiber or any combination of them used for all kinds of garments.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in Color
GB/T 2910 (All Parts) Textiles - Quantitative Chemical Analysis
GB/T 3917.2 Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force of Trouser-shaped Test Specimens (Single Tear Method)
GB/T 3920 Textiles - Tests for Color Fastness - Color Fastness to Rubbing
GB/T 3921-2008 Textiles - Tests for Color Fastness - Color Fastness to Washing with Soap or Soap and Soda
GB/T 3922 Textiles - Tests for Color Fastness - Color Fastness to Perspiration
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Breaking Force and Elongation at Breaking Force - Strip Method
GB/T 4666 Textiles - Fabrics - Determination of Width and Length
GB/T 4668-1995 Textiles - Woven Fabrics - Determination of Number of Threads per Unit Length
GB/T 4669-2008 Textiles - Woven Fabrics - Determination of Mass per Unit Length and Mass per Unit Area
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12 and 1/25
GB/T 5711 Textiles - Tests for Color Fastness - Color Fastness to Dry Cleaning
GB/T 8628 Textiles - Preparation, marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying
GB/T 8631 Textiles - Determination of Dimensional Changes of Fabrics Induced by Cold-water Immersion
GB/T 13772.2 Textiles - Determination of the Slippage Resistance of Yarns at a Seam in Woven Fabrics - Part 2: Fixed Load Method
GB/T 14801 Test Method for Skewness and Bow in Woven and Knitted Fabrics
GB/T 15552 Testing Methods and Inspection Regulations for Silk Fabrics
GB 18401 National General Safety Technical Code for Textile Products
GB/T 19981.2 Textiles - Professional Care, Drycleaning and Wetcleaning of Fabrics and Garments - Part 2: Procedure for Testing Performance when Cleaning and Finishing Using Tetrachloroethene
GB/T 29862 Textiles - Identification of Fiber Content
GB/T 30557 Silk - Terminology for Defects of Woven Fabrics
FZ/T 01057 (All Parts) Test Method for Identification of Textile Fibers
FZ/T 20021 Method for Determination of Dimensional Change of Fabrics Induced by Free Stream
FZ/T 40007 Packing and Marking Requirement for Silk and Filament Fabrics
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
lining fabrics
fabrics at the most inner layer of garments, which are generally woven by filament yarn of polyester fiber, polyamide fiber, cellulose acetate fiber, viscose fiber or cuprammonjum fiber or any combination of them
3.2
standard area
the area of textile full width × 50 cm, which is a basic unit for assessment of appearance defects of lining fabrics
4 Requirements
4.1 Contents of requirements
The requirements of lining fabrics include those on inherent quality, appearance quality and basic safety performance.
4.2 Examination items
As for the lining fabrics, the examination items of inherent quality are density deviation rate, mass deviation rate, breaking strength, tear strength, fiber content tolerance, slippage, dimensional change rate and color fastness; and those of appearance quality are color difference (compared with standard sample), width deviation rate, skewness and bow as well as appearance defects.
4.3 Grading
4.3.1 Grade of lining fabrics is assessed based on the item with the lowest grade in inherent quality and appearance quality and divided into high-grade products, first-grade products and second-grade products; the product inferior to second-grade products are off-grade products.
4.3.2 Such inherent quality items as mass deviation rate, breaking strength, tear strength, fiber content tolerance, slippage, dimensional change rate, color fastness, etc. are graded by batches, and density deviation rate and appearance quality are graded by pieces.
4.4 Basic safety performance
Basic safety performance of lining fabrics shall comply with those specified in GB 18401.
4.5 Grading requirements of inherent quality
4.5.1 See Table 1 for the grading requirements of inherent quality of lining fabrics made from polyester fiber/ polyamide fiber/ cellulose acetate fiber.
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Method
6 Inspection Rules
7 Packaging
8 Others
Annex A (Informative) Appearance Defect Classification Table
Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.
This standard is developed in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 22842-2009 Lining Fabrics; the following technical changes have been made with respect to GB/T 22842-2009 (the previous edition):
——The fixed load of slippage is adjusted (see Table 1 in 4.5.1; Table 1 in 4.5.1, Edition 2009);
——The index value of tear strength of cuprammonjum fiber lining fabrics is adjusted (see Table 2 in 4.5.2; Table 2 in 4.5.2, Edition 2009);
——The index values of tear strength of polyester fiber/ viscose fiber and polyester fiber/ cuprammonjum fiber lining fabrics are adjusted (see Table 3 in 4.5.3; Table 3 in 4.5.3, Edition 2009);
——As for dyeing standard of dye, it is changed to be darker than 1/12 of the standard darkness in GB/T 4841.3 for dark color and lighter than or equal to such value for light color (see Table 1 in 4.5.1, Table 2 in 4.5.2 and Table 3 in 4.5.3; Table 1 in 4.5.1, Table 2 in 4.5.2 and Table 3 in 4.5.3 of Edition 2009).
This standard was proposed by China National Textile and Apparel Council.
This standard is under the jurisdiction of SAC/TC 401 National Technical Committee on Silk Standardization Administration of China.
The previous edition of this standard is as follows:
——GB/T 22842-2009.
Lining Fabrics
1 Scope
This standard specifies terms and definitions, requirements, test methods, inspection rules as well as packaging and marking of lining fabrics.
This standard is applicable to assessment of the quality of lining fabrics made from filament yarn of polyester fiber, polyamide fiber, cellulose acetate fiber, viscose fiber or cuprammonjum fiber or any combination of them used for all kinds of garments.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 250 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in Color
GB/T 2910 (All Parts) Textiles - Quantitative Chemical Analysis
GB/T 3917.2 Textiles - Tear Properties of Fabrics - Part 2: Determination of Tear Force of Trouser-shaped Test Specimens (Single Tear Method)
GB/T 3920 Textiles - Tests for Color Fastness - Color Fastness to Rubbing
GB/T 3921-2008 Textiles - Tests for Color Fastness - Color Fastness to Washing with Soap or Soap and Soda
GB/T 3922 Textiles - Tests for Color Fastness - Color Fastness to Perspiration
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Breaking Force and Elongation at Breaking Force - Strip Method
GB/T 4666 Textiles - Fabrics - Determination of Width and Length
GB/T 4668-1995 Textiles - Woven Fabrics - Determination of Number of Threads per Unit Length
GB/T 4669-2008 Textiles - Woven Fabrics - Determination of Mass per Unit Length and Mass per Unit Area
GB/T 4841.3 Colour Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12 and 1/25
GB/T 5711 Textiles - Tests for Color Fastness - Color Fastness to Dry Cleaning
GB/T 8628 Textiles - Preparation, marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying
GB/T 8631 Textiles - Determination of Dimensional Changes of Fabrics Induced by Cold-water Immersion
GB/T 13772.2 Textiles - Determination of the Slippage Resistance of Yarns at a Seam in Woven Fabrics - Part 2: Fixed Load Method
GB/T 14801 Test Method for Skewness and Bow in Woven and Knitted Fabrics
GB/T 15552 Testing Methods and Inspection Regulations for Silk Fabrics
GB 18401 National General Safety Technical Code for Textile Products
GB/T 19981.2 Textiles - Professional Care, Drycleaning and Wetcleaning of Fabrics and Garments - Part 2: Procedure for Testing Performance when Cleaning and Finishing Using Tetrachloroethene
GB/T 29862 Textiles - Identification of Fiber Content
GB/T 30557 Silk - Terminology for Defects of Woven Fabrics
FZ/T 01057 (All Parts) Test Method for Identification of Textile Fibers
FZ/T 20021 Method for Determination of Dimensional Change of Fabrics Induced by Free Stream
FZ/T 40007 Packing and Marking Requirement for Silk and Filament Fabrics
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1
lining fabrics
fabrics at the most inner layer of garments, which are generally woven by filament yarn of polyester fiber, polyamide fiber, cellulose acetate fiber, viscose fiber or cuprammonjum fiber or any combination of them
3.2
standard area
the area of textile full width × 50 cm, which is a basic unit for assessment of appearance defects of lining fabrics
4 Requirements
4.1 Contents of requirements
The requirements of lining fabrics include those on inherent quality, appearance quality and basic safety performance.
4.2 Examination items
As for the lining fabrics, the examination items of inherent quality are density deviation rate, mass deviation rate, breaking strength, tear strength, fiber content tolerance, slippage, dimensional change rate and color fastness; and those of appearance quality are color difference (compared with standard sample), width deviation rate, skewness and bow as well as appearance defects.
4.3 Grading
4.3.1 Grade of lining fabrics is assessed based on the item with the lowest grade in inherent quality and appearance quality and divided into high-grade products, first-grade products and second-grade products; the product inferior to second-grade products are off-grade products.
4.3.2 Such inherent quality items as mass deviation rate, breaking strength, tear strength, fiber content tolerance, slippage, dimensional change rate, color fastness, etc. are graded by batches, and density deviation rate and appearance quality are graded by pieces.
4.4 Basic safety performance
Basic safety performance of lining fabrics shall comply with those specified in GB 18401.
4.5 Grading requirements of inherent quality
4.5.1 See Table 1 for the grading requirements of inherent quality of lining fabrics made from polyester fiber/ polyamide fiber/ cellulose acetate fiber.
Contents of GB/T 22842-2017
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements
5 Test Method
6 Inspection Rules
7 Packaging
8 Others
Annex A (Informative) Appearance Defect Classification Table
