This standard specifies product classification, models, requirements, test methods, inspection rules and marketing, packaging, transportation and storage of stainless steel pliable corrugated tube and fittings used in gas piping systems (hereinafter referred to as "tubes and fittings")
This Standard is applicable to the tubes and fittings with nominal dimension as DN10~DN50 and nominal pressure PN less than or equal to 0.2 MPa.
Foreword I
1 Scope
2 Normative References
3. Terms and Definitions
4 Classification and Model
5 Requirements
6 Test Methods
7 Test Rules
8 Marking , Packaging, Transportation and Storage
Appendix A (Informative) Tube External Dimensions and Fitting Connection Thread
Appendix B (Informative) Tube and Fitting Processing Requirements
Bibliography
This standard specifies product classification, models, requirements, test methods, inspection rules and marketing, packaging, transportation and storage of stainless steel pliable corrugated tube and fittings used in gas piping systems (hereinafter referred to as "tubes and fittings")
This Standard is applicable to the tubes and fittings with nominal dimension as DN10~DN50 and nominal pressure PN less than or equal to 0.2 MPa.
Contents of GB/T 26002-2010
Foreword I
1 Scope
2 Normative References
3. Terms and Definitions
4 Classification and Model
5 Requirements
6 Test Methods
7 Test Rules
8 Marking , Packaging, Transportation and Storage
Appendix A (Informative) Tube External Dimensions and Fitting Connection Thread
Appendix B (Informative) Tube and Fitting Processing Requirements
Bibliography
