GB/T 2828.10-2010 Sampling procedures for inspection by attributes―Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes (English Version)
1 Scope
This part of GB/T 2828 provides a general introduction to acceptance sampling by attributes and provides a brief summary of the attribute sampling schemes and plans used in GB/T 2828.1, GB/T 2828.2, GB/T 2828.3, GB/T 2828.4, GB/T 2828.5 and GB/T 2828.11.
It also provides guidance on the selection of the appropriate inspection system for use in a particular situation.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 2828.2-2008 Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:1985, MOD)
GB/T 2828.3-2008 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (ISO 2859-3:2005, IDT)
GB/T 2828.4-2008 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels (ISO 2859-4:2002, MOD)
GB/T 2828.5 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL)for lot-by-lot inspection (ISO 2859-5;2005, IDT)
GB/T 2828.11-2008 Sampling procedures for inspection by attributes - Part 11: Procedures for assessment of declared quality levels for small population
GB/T 3358.1-2009 Statistics - Vocabulary and symbols - Part 1:General statistical terms and terms used in probability (ISO 3534-1:2006, IDT)
GB/T 3358.2-2009 Statistics - Vocabulary and symbols - Part 2: Applied statistics (ISO 3534-1:2006, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2828.1, GB/T 2828.2, GB/T 2828.3, GB/T 2828.4, GB/T 2828.5, GB/T 3358.1 and GB/T 3358.2 apply.
4 General introduction to acceptance inspection
4.1 Aim of sampling inspection
The principal purpose of acceptance sampling inspection is to see that the producer submits lots of a quality that is at, or better than, a mutually agreed level. All GB/T 2828 series standards are based on a common parameter, e.g. AQL, LQ or DQL.
The producer may use these sampling procedures to ensure that the quality level will be acceptable to the consumer. In all these procedures, it must be recognized that the financial resources are not unlimited. The cost of the item should reflect the cost of inspection as well as the cost of production.
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 General introduction to acceptance inspection
4.1 Aim of sampling inspection
4.2 Acceptance sampling
4.3 Other inspection practices
4.4 Concepts of AQL, LQ and DQL
5 The GB/T 2828 series
5.1 GB/T 2828.1, Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
5.2 GB/T 2828.2, Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
5.3 GB/T 2828.3, Skip-lot sampling procedures
5.4 GB/T 2828.4 and GB/T 2828.11, Procedures for assessment of declared quality levels
5.5 GB/T 2828.5, System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
5.6 GB/T 2828.11, Procedures for assessment of declared quality levels
Bibliography
GB/T 2828.10-2010 Sampling procedures for inspection by attributes―Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes (English Version)
Standard No.
GB/T 2828.10-2010
Status
valid
Language
English
File Format
PDF
Word Count
7500 words
Price(USD)
180.0
Implemented on
2011-4-1
Delivery
via email in 1 business day
Detail of GB/T 2828.10-2010
Standard No.
GB/T 2828.10-2010
English Name
Sampling procedures for inspection by attributes―Part 10:Introduction to the GB/T 2828 series of standards for sampling for inspection by attributes
1 Scope
This part of GB/T 2828 provides a general introduction to acceptance sampling by attributes and provides a brief summary of the attribute sampling schemes and plans used in GB/T 2828.1, GB/T 2828.2, GB/T 2828.3, GB/T 2828.4, GB/T 2828.5 and GB/T 2828.11.
It also provides guidance on the selection of the appropriate inspection system for use in a particular situation.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the normative document (including any amendments) applies.
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999, IDT)
GB/T 2828.2-2008 Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (ISO 2859-2:1985, MOD)
GB/T 2828.3-2008 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (ISO 2859-3:2005, IDT)
GB/T 2828.4-2008 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels (ISO 2859-4:2002, MOD)
GB/T 2828.5 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL)for lot-by-lot inspection (ISO 2859-5;2005, IDT)
GB/T 2828.11-2008 Sampling procedures for inspection by attributes - Part 11: Procedures for assessment of declared quality levels for small population
GB/T 3358.1-2009 Statistics - Vocabulary and symbols - Part 1:General statistical terms and terms used in probability (ISO 3534-1:2006, IDT)
GB/T 3358.2-2009 Statistics - Vocabulary and symbols - Part 2: Applied statistics (ISO 3534-1:2006, IDT)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2828.1, GB/T 2828.2, GB/T 2828.3, GB/T 2828.4, GB/T 2828.5, GB/T 3358.1 and GB/T 3358.2 apply.
4 General introduction to acceptance inspection
4.1 Aim of sampling inspection
The principal purpose of acceptance sampling inspection is to see that the producer submits lots of a quality that is at, or better than, a mutually agreed level. All GB/T 2828 series standards are based on a common parameter, e.g. AQL, LQ or DQL.
The producer may use these sampling procedures to ensure that the quality level will be acceptable to the consumer. In all these procedures, it must be recognized that the financial resources are not unlimited. The cost of the item should reflect the cost of inspection as well as the cost of production.
Contents of GB/T 2828.10-2010
Foreword i
Introduction ii
1 Scope
2 Normative references
3 Terms and definitions
4 General introduction to acceptance inspection
4.1 Aim of sampling inspection
4.2 Acceptance sampling
4.3 Other inspection practices
4.4 Concepts of AQL, LQ and DQL
5 The GB/T 2828 series
5.1 GB/T 2828.1, Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
5.2 GB/T 2828.2, Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
5.3 GB/T 2828.3, Skip-lot sampling procedures
5.4 GB/T 2828.4 and GB/T 2828.11, Procedures for assessment of declared quality levels
5.5 GB/T 2828.5, System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
5.6 GB/T 2828.11, Procedures for assessment of declared quality levels
Bibliography
