Standard No.:	GB/T 34542.2-2018
English Name:	Storage and transportation systems for gaseous hydrogen—Part 2:Test methods for evaluating metallic material compatibility in hydrogen atmosphere
Chinese Name:	氢气储存输送系统 第2部分：金属材料与氢环境相容性试验方法
Chinese Classification:	F19    New energy and others
Professional Classification:	GB    National Standard
Source Content Issued by:	SAMR; SAC
Issued on:	2018-05-14
Implemented on:	2018-12-1
Status:	valid
Target Language:	English
File Format:	PDF
Word Count:	5500 words
Translation Price(USD):	165.0
Delivery:	via email in 1 business day

Codeofchina.com is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative. GB/T 34542 consists the following parts under the general title Storage and transportation systems for gaseous hydrogen: ——Part 1: General requirements; ——Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere ——Part 3: Test method for determination of the susceptibility of metallic materials to hydrogen gas embrittlement (HGE) ——Part 4: Technical requirements for storage system for gaseous hydrogen; ——Part 5: Technical requirements for transportation system for gaseous hydrogen; ——Part 6: Technical requirements for compression system for gaseous hydrogen; ——Part 7: Technical requirements for filling system for gaseous hydrogen; ——Part 8: Technical requirements for fire prevention and explosion prevention. This is Part 2 of GB/T 34542. This part is developed in accordance with the rules given in GB/T 1.1-2009. This part was proposed by and is under the jurisdiction of SAC/TC 309 the National Technical Committee on Hydrogen Energy of Standardization Administration of China. Storage and transportation systems for gaseous hydrogen - Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere 1 Scope This standard specifies the test equipment, test conditions and test methods for evaluating metallic material compatibility in hydrogen atmosphere. This standard is applicable to the determination of tensile properties, fatigue properties and fracture mechanics properties of metallic materials in hydrogen atmosphere. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 228.1 Metallic materials - Tensile testing - Part 1: Method of test at room temperature GB/T 3075 Metallic materials - Fatigue testing - Axial-force-controlled method GB/T 3634.2 Hydrogen - Part 2: Pure hydrogen, high pure hydrogen and ultra-pure hydrogen GB/T 6398 Metallic materials - Fatigue testing - Fatigue crack growth method GB/T 10623 Metallic material - Mechanical testing - Vocabulary GB/T 15248 The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials GB/T 21143 Metallic materials - Unified method of test for determination of quasistatic fracture toughness GB/T 26077 Metallic materials - Fatigue testing - Axial-strain-controlled method GB/T 29729 Essential requirements for the safety of hydrogen systems GB/T 34542.1 Storage and transportation systems for gaseous hydrogen - Part 1: General requirements   3 Terms and definitions For the purposes of this document, the terms and definitions given in GB/T 10623 and the following apply. 3.1 test chamber sealed container containing high-pressure gas for testing mechanical properties of metal materials 3.2 internal measuring equipment device installed inside the test chamber to measure the axial force or deformation of a specimen 3.3 external measuring equipment device installed outside the test chamber to measure the axial force of the loading bar or the displacement of the cross beam 3.4 environment reference test material performance test conducted in atmospheric, nitrogen or inert gas environments to comparatively evaluate the degree of deterioration of material properties caused by hydrogen gas 4 Symbols For the purposes of this document, the following symbols apply. p Test pressure, MPa T Test temperature, ℃ R Force ratio, which is the ratio of the minimum force to maximum force; da/dN Fatigue crack growth rate, m/cycle; △K Stress-intensity factor range, MPa·m1/2. 5 Test equipment 5.1 General requirements 5.1.1 See Annex A for the main body of the test equipment for evaluating metallic material compatibility in high-pressure hydrogen atmosphere, which is mainly composed of test chamber, supporting equipment, measuring equipment and loading bar. 5.1.2 The test equipment shall meet the relevant safety requirements of GB/T 29729 and GB/T 34542.1. 5.1.3 The materials of test equipment shall meet the requirements of corresponding national or professional standards, and materials in direct contact with gaseous hydrogen shall have good compatibility with gaseous hydrogen. 5.1.4 The temperature and pressure control system of the test equipment shall be able to meet the relevant test requirements. 5.1.5 The gas discharge system of the test equipment shall be provided with a flow control device. 5.1.6 If the test equipment is not in use, the test chamber should be filled with 0.1 MPa high-purity nitrogen or inert gas for protection. 5.1.7 If the test equipment is not in use for more than 15 consecutive days, the test shall be carried out only after the equipment has passed the leak test. 5.2 Test chamber 5.2.1 The material, design, manufacture, use management and periodic inspection of the test chamber shall refer to the relevant requirements of TSG 21. 5.2.2 The influence of fatigue load and gaseous hydrogen on material properties shall be considered in the design of test chamber. 5.2.3 The number of pressure cycles designed for the test chamber shall not be less than the number of pressure cycles within the expected service life. 5.2.4 Appropriate devices should be adopted to balance the axial force exerted by gas pressure on the loading bar.

Foreword i 1 Scope 2 Normative references 3 Terms and definitions 4 Symbols 5 Test equipment 6 Test conditions 7 Test methods Annex A (Informative) Basic structure of main body of test equipment