GB/T 3739-2008 24° cone connectors — Male elbow English, Anglais, Englisch, Inglés, えいご
1 Scope
This standard specifies the dimensions, designation and technical requirements for male elbow of 24° cone connectors and coupling bodies.
This standard is applicable to hydraulic fluid transmission and general-purpose pipeline systems with an outer diameter of 4mm to 42mm and a maximum working pressure of 10MPa to 40MPa.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions of the normative document referred to applies.
GB/T 3759-2008 24° cone connectors - Nut
GB/T 3764-2008 24° cone connectors - Ferrule
GB/T 3765-2008 24° cone connectors - Specification
3 Dimensions
The dimensions of male elbow of 24° cone connector and coupling body shall meet the requirements of Figures 1 and 2 and Table 1, and the dimensions of the ferrule end of coupling body shall meet the requirements of GB/T 3764.
4 Designation
4.1 Designation method
GB/T 3739-2008 24° cone connectors — Male elbow English, Anglais, Englisch, Inglés, えいご
1 Scope
This standard specifies the dimensions, designation and technical requirements for male elbow of 24° cone connectors and coupling bodies.
This standard is applicable to hydraulic fluid transmission and general-purpose pipeline systems with an outer diameter of 4mm to 42mm and a maximum working pressure of 10MPa to 40MPa.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this part. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest editions of the normative document referred to applies.
GB/T 3759-2008 24° cone connectors - Nut
GB/T 3764-2008 24° cone connectors - Ferrule
GB/T 3765-2008 24° cone connectors - Specification
3 Dimensions
The dimensions of male elbow of 24° cone connector and coupling body shall meet the requirements of Figures 1 and 2 and Table 1, and the dimensions of the ferrule end of coupling body shall meet the requirements of GB/T 3764.
4 Designation
4.1 Designation method
