Standard No.:	GB/T 5905-2011
English Name:	Cranes—Test code and procedures
Chinese Name:	起重机 试验规范和程序
Chinese Classification:	J80    Hoisting machinery
Professional Classification:	GB    National Standard
ICS Classification:	53.020.20 53.020.20    Cranes 53.020.20
Source Content Issued by:	AQSIQ;SAC
Issued on:	2011-12-30
Implemented on:	2012-6-1
Status:	superseded
Superseded by:	GB/T 5905.1-2023 Cranes—Inspection and test code—Part 1:General principle
Superseded on:	2023-8-6
Superseding:	GB/T 5905-1986 Cranes - Test Code and Procedures GB/T 15905-1995 Rubber, vulcanized－Test method of damp heat aging GB 5905-1986 Cranes－Test code and procedures
Target Language:	English
File Format:	PDF
Word Count:	5000 words
Translation Price(USD):	100.0
Delivery:	via email in 1 business day

1 Scope This standard specifies the tests, inspections and procedures for verifying the performance of cranes (including its operation parameters and its capability to lift rated loads) (see ISO 7363). This standard is applicable to the types of cranes designated in ISO 4306-1, prior to first use following manufacture or after modification or repair of the load-bearing structure or a component of an individual crane. Where rated loads are governed by stability, a test procedure and test load are specified that permit stability margins to be easily verified. 2 Normative References The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 4306-1, Cranes - Vocabulary - Part 1: General ISO 7363, Cranes and Lifting Appliances - Technical Characteristics and Acceptance Documents ISO 11629, Cranes - Measurement of the mass of a Crane and Its Components ISO 13202, Cranes - Measurement of Velocity and Time Parameters ISO 14518, Cranes - Requirements for Test Loads 3 Types of Test and Inspection Procedures 3.1 Three types of test and inspection procedures are to be used to accomplish the aims of this standard:

Contents Foreword I 1 Scope 2 Normative References 3 Types of Test and Inspection Procedures 4 Test and Inspection Procedures 5 Test Conditions 6 Test Report Appendix A (normative) Stability Test and Test Conditions for Mobile Cranes Bibliography