GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads (English Version)
This standard specifies the requirements for thread form, dimensions, tolerances and designation for parallel internal and taper external threads with 55° thread form angle for pairs on which pressure-tight joints are made.
This standard is applicable to the threaded jointing for pipes, valves, fittings, plugs and other pipeline equipment.
An appropriate jointing medium is allowed to be used on the thread pair, e.g. threaded surface wrapped in tape and coated with sealant.
2 Normative References
The following standards contain provisions which, through reference in this test, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB/T 14791-1993 The Terms of Screw Threads (neq ISO 5408:1983)
3 Definitions and Symbols
3.1 Definitions
All the thread terms used in this standard, other than the following two terms, comply with GB/T 14791.
Foreword i ISO Foreword ii 1 Scope 2 Normative References 3 Definitions and Symbols 4 Thread Form Design 5 Basic Dimensions 6 Chamfers 7 Tolerances 8 Thread Lengths 9 Designation
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads (English Version)
Standard No.
GB/T 7306.1-2000
Status
valid
Language
English
File Format
PDF
Word Count
2000 words
Price(USD)
50.0
Implemented on
2000-1-2
Delivery
via email in 1 business day
Detail of GB/T 7306.1-2000
Standard No.
GB/T 7306.1-2000
English Name
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads
1 Scope
This standard specifies the requirements for thread form, dimensions, tolerances and designation for parallel internal and taper external threads with 55° thread form angle for pairs on which pressure-tight joints are made.
This standard is applicable to the threaded jointing for pipes, valves, fittings, plugs and other pipeline equipment.
An appropriate jointing medium is allowed to be used on the thread pair, e.g. threaded surface wrapped in tape and coated with sealant.
2 Normative References
The following standards contain provisions which, through reference in this test, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB/T 14791-1993 The Terms of Screw Threads (neq ISO 5408:1983)
3 Definitions and Symbols
3.1 Definitions
All the thread terms used in this standard, other than the following two terms, comply with GB/T 14791.
Contents of GB/T 7306.1-2000
Foreword i
ISO Foreword ii
1 Scope
2 Normative References
3 Definitions and Symbols
4 Thread Form Design
5 Basic Dimensions
6 Chamfers
7 Tolerances
8 Thread Lengths
9 Designation
