2023-2-7 3.235.195.196
Code of China Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/GB/T 7306.2-2000
GB/T 7306.2-2000   Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads (English Version)
Standard No.: GB/T 7306.2-2000 Status:valid remind me the status change

Email:

Language:English File Format:PDF
Word Count: 2000 words Price(USD):184.0 remind me the price change

Email:

Implemented on:2000-1-2 Delivery: via email in 1 business day
,,
Standard No.: GB/T 7306.2-2000
English Name: Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads
Chinese Name: 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹
Chinese Classification: J04    Basic standards and general methods
Professional Classification: GB    National Standard
ICS Classification: 21.040.30 21.040.30    Special screw threads 21.040.30
Issued by: State Quality and Technology Supervision Bureau
Issued on: 2000-07-02
Implemented on: 2000-1-2
Status: valid
Superseding:GB/T 7306-1987 Pipe threads where pressure-tight joints are made on the threads
Language: English
File Format: PDF
Word Count: 2000 words
Price(USD): 184.0
Delivery: via email in 1 business day
1 Scope This standard specifies the requirements for thread form, dimensions, tolerances and designation for taper internal and external threads with 55° thread form angle for pairs on which pressure-tight joints are made. This standard is applicable to the threaded jointing for pipes, valves, fittings, plugs and other pipeline equipment. An appropriate jointing medium is allowed to be used on the thread pair, e.g. threaded surface wrapped in tape and coated with sealant. 2 Normative References The following standards contain provisions which, through reference in this test, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. GB/T 14791-1993 The Terms of Screw Threads (neq ISO 5408:1983) 3 Definitions and Symbols 3.1 Definitions All the thread terms used in this standard, other than the following two terms, comply with GB/T 14791.
Foreword i ISO Foreword ii 1 Scope 2 Normative References 3 Definitions and Symbols 4 Thread Form Design 5 Basic Dimensions 6 Chamfers 7 Tolerances 8 Thread Lengths 9 Designation
Referred in GB/T 7306.2-2000:
*GB/T 14791-1993 The terms of screw threads
GB/T 7306.2-2000 is referred in:
* HG/T 20592-2009 Stee1 Pipe F1anges (PN designated)
* GB 16410-2007 Domestic Gas Cooking Appliances
* GB 16410-2007/XG1-2012 Domestic gas cooking appliances
* GB/T 9124-2010 Specification for steel pipe flanges
* GB/T 12237-2007 Stell ball valves for petroleum petrochemical and allied industries
* CJ/T 335-2010 Slam-shut valves and relief valves for city gas
* GB 25034-2010 Gas-fired heating and hot water combi-boilers
* GB/T 3287-2000 Malleable cast iron pipe fittings
* GB/T 20801.3-2006 Pressure Piping Code - Industrial Piping - Part 3: Design and Calculation
* HG/T 20615-2009 Steel Pipe Flanges
* GB 16410-2007/XG1-2012 Domestic gas cooking appliances
* GB 16410-2007/XG1-2012 Domestic gas cooking appliances
* GB/T 9124-2010 Specification for steel pipe flanges
* GB 25034-2010 Gas-fired heating and hot water combi-boilers
* CJ/T 335-2010 Slam-shut valves and relief valves for city gas
* HG/T 20592-2009 Stee1 Pipe F1anges (PN designated)
* HG/T 20615-2009 Steel Pipe Flanges
* GB/T 3287-2000 Malleable cast iron pipe fittings
* GB 18145-2014 Ceramic Cartridge Faucets
* GB/T 3765-2008 24° cone connectors - Specification
* GB/T 24293-2009 Digital thermostatic faucet
* JB/T 7746-2006 Compact steel valves
* GB/T 12234-2007/XG1-2011 Bolted bonnet steel gate valves for petroleum and natural gas industries
* GB/T 12234-2007/XG1-2011 Bolted bonnet steel gate valves for petroleum and natural gas industries (including Amendment 1)
* GB/T 12234-2007 Bolted bonnet steel gate valves for petroleum and natural gas industries
* GB/T 12235-2007/XG1-2011 Steel globe valves and lift check valve for petroleum,petrochemical and allied industries (including Amendment 1)
* GB/T 12235-2007 Steel globe valves and lift check valve for petroleum petrochemical and allied industries
* GB/T 12234-2007/XG1-2011 Bolted bonnet steel gate valves for petroleum and natural gas industries (including Amendment 1)
* SH/T 3419-2007 Steel swage(d) nipples
* SH/T 3419-2007 Steel swage(d) nipples
* SH/T 3419-2007 Steel swage(d) nipples
* SH/T 3419-2007 Steel swage(d) nipples
* SH/T 3419-2007 Steel swage(d) nipples
* SH/T 3419-2007 Steel swage(d) nipples
* CJ/T 335-2010 Slam-shut valves and relief valves for city gas
* GB 18145-2003 Ceramic cartridge faucets
* GB 27790-2011 City Gas Pressure Regulators
* SL 470-2010 basic parameters and technical requirements for irrigation filters
* JB/T 5000.11-2007 Heavy mechanical general techniques and standards-Part 11:Attached piping
* JB/T 6441-2008 Safety Valves for Compressor
* GB/T 22654-2008 Automatic steam traps - Technical specification
* CJ/T 256-2007 Pilot control pressure reducing valve
* CJ/T 197-2010 Stainless steel corrugated tubes for the connection of gas appliances
* GB/T 26002-2010 Stainless steel pliable corrugated tubing and fittings used in gas piping systems
* SH/T 3059-2012 Specification for piping material design selection in petrochemical industry
* HG/T 20592~20635-2009 Steel pipe flanges,gaskets and bolting
* GB/T 3215-2007 Centrifugal pumps for petroleum petrochemical and natural gas industries
* GB/T 20322-2006 Petroleum and natural gas industries - Reciprocating compressors
* CJ/T 336-2010 Condensing domestic gas instantaneous water heaters
* JB/T 6434-2010 Oil-transferring gear pumps
* GB/T 3091-2015 Welded steel pipes for low pressure liquid delivery
* GB/T 12241-2005 Safety valves--General requirements
* GB/T 3287-2011 Malleable cast iron pipe fittings
*TB/T 1900-2016 Air reservior of railway vehicle
*TB/T 3217-2009 Semi-spherical Angle Cock for Locomotive
*TB/T 3456-2016 Cut-out Cock for EMU/DMU
*TB/T 2698-2009 Ball Angle Cock and Combined Dirt Collector for Rolling Stock
*JC/T 758-2008 Washbasin faucets
*GB/T 12224-2015 General requirements for industrial steel valves
*QB/T 5003-2016 Touch-sensitive faucet
*GB/T 27710-2011 Floor drain
*QB/T 4000-2010 Sensor automatic thermostatic faucets
*TB/T 3474.2-2018 Thread connecting hose for rolling stock-Part 2:Rubber hose
*JC/T 2115-2012 Non-contact sensing-actuating valves for water supply appliance
*GB 16410-2020 Domestic gas cooking appliances
*GB 5135.13-2006 Automatic sprinkler system Part 13:Performance requirements and test methods of drencher head
*QB/T 5418-2019 Thermostatic Shower System
*GB 5135.1-2019 Automatic sprinkler system—Part 1:Sprinkler
*GB/T 26750-2011 Sanitary ware - Pressure assistant water flushing devices
*GB/T 12237-2021 Steel ball valves for petroleum, petrochemical and allied industries
*GB/T 28778-2012 Pilot-operated safety valves
*GB/T 28776-2012 Steel gate, globe and check valve for the petroleum and natural gas industries (for sizes DN100 and smaller)
*T/CECS 10004-2018 Closed expansion vessels with built in diaphragm
Code of China
Standard
GB/T 7306.2-2000  Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads (English Version)
Standard No.GB/T 7306.2-2000
Statusvalid
LanguageEnglish
File FormatPDF
Word Count2000 words
Price(USD)184.0
Implemented on2000-1-2
Deliveryvia email in 1 business day
Detail of GB/T 7306.2-2000
Standard No.
GB/T 7306.2-2000
English Name
Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads
Chinese Name
55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹
Chinese Classification
J04
Professional Classification
GB
ICS Classification
Issued by
State Quality and Technology Supervision Bureau
Issued on
2000-07-02
Implemented on
2000-1-2
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
GB/T 7306-1987 Pipe threads where pressure-tight joints are made on the threads
Language
English
File Format
PDF
Word Count
2000 words
Price(USD)
184.0
Keywords
GB/T 7306.2-2000, GB 7306.2-2000, GBT 7306.2-2000, GB/T7306.2-2000, GB/T 7306.2, GB/T7306.2, GB7306.2-2000, GB 7306.2, GB7306.2, GBT7306.2-2000, GBT 7306.2, GBT7306.2
Introduction of GB/T 7306.2-2000
1 Scope This standard specifies the requirements for thread form, dimensions, tolerances and designation for taper internal and external threads with 55° thread form angle for pairs on which pressure-tight joints are made. This standard is applicable to the threaded jointing for pipes, valves, fittings, plugs and other pipeline equipment. An appropriate jointing medium is allowed to be used on the thread pair, e.g. threaded surface wrapped in tape and coated with sealant. 2 Normative References The following standards contain provisions which, through reference in this test, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. GB/T 14791-1993 The Terms of Screw Threads (neq ISO 5408:1983) 3 Definitions and Symbols 3.1 Definitions All the thread terms used in this standard, other than the following two terms, comply with GB/T 14791.
Contents of GB/T 7306.2-2000
Foreword i ISO Foreword ii 1 Scope 2 Normative References 3 Definitions and Symbols 4 Thread Form Design 5 Basic Dimensions 6 Chamfers 7 Tolerances 8 Thread Lengths 9 Designation
About Us   |    Contact Us   |    Terms of Service   |    Privacy   |    Cancellation & Refund Policy   |    Payment
Tel: +86-10-8572 5655 | Fax: +86-10-8581 9515 | Email: coc@codeofchina.com | QQ: 672269886
Copyright: Foryou Tech Co., Ltd. 2008-2040
 
 
Keywords:
GB/T 7306.2-2000, GB 7306.2-2000, GBT 7306.2-2000, GB/T7306.2-2000, GB/T 7306.2, GB/T7306.2, GB7306.2-2000, GB 7306.2, GB7306.2, GBT7306.2-2000, GBT 7306.2, GBT7306.2