1 Scope
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transport and storage of pavement marking paint products.
This standard is applicable to liquid state, solvent-based, 2-component, water-based, solid state hot melt pavement marking paints used to mark various road traffic markings on the highway in China; the pavement marking paint used to mark the road traffic marking on urban roads, airports, ports, factories and mines, tree farms may be implemented by reference to this standard.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum contents) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Contents
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transport and Storage
JT/T 280-2004, JT 280-2004, JTT 280-2004, JT/T280-2004, JT/T 280, JT/T280, JT280-2004, JT 280, JT280, JTT280-2004, JTT 280, JTT280
Introduction of JT/T 280-2004
1 Scope
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transport and storage of pavement marking paint products.
This standard is applicable to liquid state, solvent-based, 2-component, water-based, solid state hot melt pavement marking paints used to mark various road traffic markings on the highway in China; the pavement marking paint used to mark the road traffic marking on urban roads, airports, ports, factories and mines, tree farms may be implemented by reference to this standard.
2 Normative References
The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrigendum contents) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest edition of the normative document referred to applies.
Contents of JT/T 280-2004
Contents
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transport and Storage
