This Standard specifies the classification, requirements, test methods, inspection rules and marking, labeling, packaging, transportation and storage of leather glove.
This Standard is applicable to leather gloves made from natural leather.
This Standard also is applicable to gloves made from such materials as artificial leather and synthetic leather as well as to those made from natural leather, artificial leather and synthetic leather as main materials and textiles as auxiliary materials.
This Standard is not applicable to leather gloves used for special purposes and requirements.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated reference, subsequent amendments to (excluding the corrections), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
1 Scope
This Standard specifies the classification, requirements, test methods, inspection rules and marking, labeling, packaging, transportation and storage of leather glove.
This Standard is applicable to leather gloves made from natural leather.
This Standard also is applicable to gloves made from such materials as artificial leather and synthetic leather as well as to those made from natural leather, artificial leather and synthetic leather as main materials and textiles as auxiliary materials.
This Standard is not applicable to leather gloves used for special purposes and requirements.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated reference, subsequent amendments to (excluding the corrections), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
