1 Scope
This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of tooth strips.
This standard is applicable to tooth strips that clean and whiten teeth, as well as reduce tooth stains.
2 Normative references
The following documents are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 601 Chemical reagent—Preparations of reference titration solutions
GB/T 602 Chemical reagent—Preparations of standard solutions for impurity
GB/T 603 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB 8372 Toothpaste
GB 9687-1998 Hygienic standard for polyethylene products used as food containers and tablewares
GB/T 13531.1 General methods on determination of cosmetics—Determination of pH
GB 22115 General requirements for raw materials of toothpastes
GB 29337 General labeling for oral care and cleaning products
JJF 1070 Rules of metrological testing for net quantity of products in prepackages with fixed content
QB/T 1685 Requirements of packaging appearance for cosmetic products
Decree No.75 [2005] of the General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China Measures for the metrological supervision and administration of quantitatively packed commodities
Hygienic standard for cosmetics issued by the Ministry of Health of the People’s Republic of China
Pharmacopoeia of the People’s Republic of China (Volume I) (2010 Edition)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
tooth strips
strips that clean, whiten and care for teeth by adhering to the surface of teeth and releasing the active ingredients contained therein
3.2
matrix layer
middle layer of the tooth strip, which contains active ingredients and is the main part of the tooth strip to play its role
3.3
backing layer
carrier for loading the matrix layer
3.4
protective layer
upper layer of the tooth strip, which protects the matrix layer from being polluted, and is usually made of release paper, plastic and other materials
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Inspection rules
7 Marking
8 Packaging
9 Transportation and storage
1 Scope
This standard specifies the terms and definitions, requirements, test methods, inspection rules, marking, packaging, transportation and storage of tooth strips.
This standard is applicable to tooth strips that clean and whiten teeth, as well as reduce tooth stains.
2 Normative references
The following documents are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 601 Chemical reagent—Preparations of reference titration solutions
GB/T 602 Chemical reagent—Preparations of standard solutions for impurity
GB/T 603 Chemical reagent—Preparations of reagent solutions for use in test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB 8372 Toothpaste
GB 9687-1998 Hygienic standard for polyethylene products used as food containers and tablewares
GB/T 13531.1 General methods on determination of cosmetics—Determination of pH
GB 22115 General requirements for raw materials of toothpastes
GB 29337 General labeling for oral care and cleaning products
JJF 1070 Rules of metrological testing for net quantity of products in prepackages with fixed content
QB/T 1685 Requirements of packaging appearance for cosmetic products
Decree No.75 [2005] of the General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China Measures for the metrological supervision and administration of quantitatively packed commodities
Hygienic standard for cosmetics issued by the Ministry of Health of the People’s Republic of China
Pharmacopoeia of the People’s Republic of China (Volume I) (2010 Edition)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
tooth strips
strips that clean, whiten and care for teeth by adhering to the surface of teeth and releasing the active ingredients contained therein
3.2
matrix layer
middle layer of the tooth strip, which contains active ingredients and is the main part of the tooth strip to play its role
3.3
backing layer
carrier for loading the matrix layer
3.4
protective layer
upper layer of the tooth strip, which protects the matrix layer from being polluted, and is usually made of release paper, plastic and other materials
Contents of QB/T 4857-2015
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Inspection rules
7 Marking
8 Packaging
9 Transportation and storage
