This standard specifies the limit requirements, management, test rules, qualification judgment and asbestos batch test requirements for hazardous substances in automobile products.
This standard is applicable to automobile products produced by the Company.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 24409-2009 Limit of Harmful Substances of Automobile Coatings
IEC 62321:2008 Electrotechnical Products - Determination of Levels of Six Regulated Substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers)
ISO 17075:2007 Leather - Chemical Tests - Determination of Chromium(VI) Content
ISO 22262-1:2012 Air Quality - Bulk Materials - Part 1: Sampling and Qualitative Determination of Asbestos in Commercial Bulk Materials
EN 15205:2006 Determination of Hexavalent Chromium in Corrosion Protection Layers - Qualitative Analysis
67/548/EEC Council Directive on the Approximation of Laws, Regulations and Administrative Provisions Relating to the Classification, Packaging and Labelling of Dangerous Substances
842/2006/EC Regulation EC No. 842/2006 of the European Parliament and of the Council on Fluorine-Containing Greenhouse Gases
850/2004/EC Regulation EC No. 850/2004 of the European Parliament and of the Council on Persistent Organic Pollutants
1907/2006/EC Regulation EC No. 1907/2006 of the European Parliament and of the Council Concerning the Registration, Evaluation, Authorization and Restriction of Chemicals
2000/53/EC Directive 2000/53/EC of the European Parliament and of the Council on End-of-Life Vehicles (2002/525/EC, 2005/63/EC, 2005/438/EC, 2005/673/EC, 2008/33/EC, 2008/689/EC, 2010/115/EU and 2011/37/EU)
For the purposes of this standard, the following terms and definitions apply.
3.1
substance
the elementary substance or compound composed of chemical elements and existing in nature
3.2
hazardous substance
Foreword i Introduction ii 1 Scope 2 Normative References 3 Terms and Definitions 4 Requirements and Management for the Limit of Hazardous Substances 5 Test Rules 6 Qualification Judgment 7 Asbestos Batch Test Requirements Annex A (Normative) List of Exemptions Annex B (Normative) Test Methods Annex C (Normative) List of Other Hazardous Substances Annex D (Normative) Declaration Form of Hazardous Substances
1 Scope
This standard specifies the limit requirements, management, test rules, qualification judgment and asbestos batch test requirements for hazardous substances in automobile products.
This standard is applicable to automobile products produced by the Company.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB 24409-2009 Limit of Harmful Substances of Automobile Coatings
IEC 62321:2008 Electrotechnical Products - Determination of Levels of Six Regulated Substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers)
ISO 17075:2007 Leather - Chemical Tests - Determination of Chromium(VI) Content
ISO 22262-1:2012 Air Quality - Bulk Materials - Part 1: Sampling and Qualitative Determination of Asbestos in Commercial Bulk Materials
EN 15205:2006 Determination of Hexavalent Chromium in Corrosion Protection Layers - Qualitative Analysis
67/548/EEC Council Directive on the Approximation of Laws, Regulations and Administrative Provisions Relating to the Classification, Packaging and Labelling of Dangerous Substances
842/2006/EC Regulation EC No. 842/2006 of the European Parliament and of the Council on Fluorine-Containing Greenhouse Gases
850/2004/EC Regulation EC No. 850/2004 of the European Parliament and of the Council on Persistent Organic Pollutants
1907/2006/EC Regulation EC No. 1907/2006 of the European Parliament and of the Council Concerning the Registration, Evaluation, Authorization and Restriction of Chemicals
2000/53/EC Directive 2000/53/EC of the European Parliament and of the Council on End-of-Life Vehicles (2002/525/EC, 2005/63/EC, 2005/438/EC, 2005/673/EC, 2008/33/EC, 2008/689/EC, 2010/115/EU and 2011/37/EU)
NIOSH 9000 Asbestos Inspection - X-ray Diffraction
NIOSH 9002 Asbestos inspection - Polarizing Microscope
GS Certification Safety Certification
Canadian Environmental Protection Act
Dioxin Countermeasures
Chemical Substance Control Law (Japanese)
3 Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
substance
the elementary substance or compound composed of chemical elements and existing in nature
3.2
hazardous substance
Contents of Q/CC JT098-2013
Foreword i
Introduction ii
1 Scope
2 Normative References
3 Terms and Definitions
4 Requirements and Management for the Limit of Hazardous Substances
5 Test Rules
6 Qualification Judgment
7 Asbestos Batch Test Requirements
Annex A (Normative) List of Exemptions
Annex B (Normative) Test Methods
Annex C (Normative) List of Other Hazardous Substances
Annex D (Normative) Declaration Form of Hazardous Substances
