1 Scope
This standard specifies the technical requirements, inspection rules, transportation and storage of welded steel air reservoir (with a working pressure ≤600kPa) for air braking system of rolling stock.
This standard is applicable to newly-made welded steel air reservoir.
2 Normative References
The following standards contained provisions which, through reference in this standard, constitute provisions of this standard. At the time of publication, all editions indicated are valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the following standards.
GB/T 1804-92 General Tolerances - Tolerances for Linear Dimensions without Individual Tolerance Indications
TB/T 778-91 Technical Specification of Threaded Pipe Fittings for Locomotive and Rolling stock
TB/T 1580-1995 Technical Specification for Welding of New Built Locomotive
TB/T 1582-1995 Technical Specifications of Locomatives' CO2 Shielded Arc Welding
TB/T 2250-91 Rolling Stock Welded Structure - Limit Deviation of Unnoted Tolerances and Dimensions
ZB J 59 002.3-88 Thermal Cutting - Quality and Dimensional Deviation in the Gas Cutting
3 Technical Requirements
3.1 General requirements
3.1.1 Air reservoir must be manufactured in accordance with the drawings approved upon relevant procedures and this standard.
Foreword II
1 Scope
2 Normative References
3 Technical Requirements
4 Inspection Rules
5 Transportation and Storage
1 Scope
This standard specifies the technical requirements, inspection rules, transportation and storage of welded steel air reservoir (with a working pressure ≤600kPa) for air braking system of rolling stock.
This standard is applicable to newly-made welded steel air reservoir.
2 Normative References
The following standards contained provisions which, through reference in this standard, constitute provisions of this standard. At the time of publication, all editions indicated are valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the latest editions of the following standards.
GB/T 1804-92 General Tolerances - Tolerances for Linear Dimensions without Individual Tolerance Indications
TB/T 778-91 Technical Specification of Threaded Pipe Fittings for Locomotive and Rolling stock
TB/T 1580-1995 Technical Specification for Welding of New Built Locomotive
TB/T 1582-1995 Technical Specifications of Locomatives' CO2 Shielded Arc Welding
TB/T 2250-91 Rolling Stock Welded Structure - Limit Deviation of Unnoted Tolerances and Dimensions
ZB J 59 002.3-88 Thermal Cutting - Quality and Dimensional Deviation in the Gas Cutting
3 Technical Requirements
3.1 General requirements
3.1.1 Air reservoir must be manufactured in accordance with the drawings approved upon relevant procedures and this standard.
Contents of TB/T 1900-1998
Foreword II
1 Scope
2 Normative References
3 Technical Requirements
4 Inspection Rules
5 Transportation and Storage
