1 Scope
This Standard specifies the dimension, shape, weight, technical requirements, test method, inspection rules, packing, mark and quality certificate of steel strip for packing.
This Standard is applicable to the steel strips (carbon structural steel, carbon manganese steel and low alloy steel) for the packing of paper boxes, wooden cases, textiles and chemical products, as well as metallic material.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 222 Method of Sampling Steel for Determination of Chemical Composition and Permissible Variations for Product Analysis
GB/T 228-1987 Metallic Materials — Tensile Testing
GB/T 235 Metallic Materials — Sheet and Strip 3 mm Thick or Less — Reverse Bend Test
GB/T 247 General Rule of Acceptance, Package, Mark and Certification for Steel Plates (Sheets) and Strips
GB/T 710 Hot-rolled Quality Carbon Structural Steel Sheets and Strips
GB/T 912 Hot-rolled Sheets and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
GB/T 6397-1986 Metallic Materials — Test Pieces for Tensile Testing
1 Scope
This Standard specifies the dimension, shape, weight, technical requirements, test method, inspection rules, packing, mark and quality certificate of steel strip for packing.
This Standard is applicable to the steel strips (carbon structural steel, carbon manganese steel and low alloy steel) for the packing of paper boxes, wooden cases, textiles and chemical products, as well as metallic material.
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 222 Method of Sampling Steel for Determination of Chemical Composition and Permissible Variations for Product Analysis
GB/T 228-1987 Metallic Materials — Tensile Testing
GB/T 235 Metallic Materials — Sheet and Strip 3 mm Thick or Less — Reverse Bend Test
GB/T 247 General Rule of Acceptance, Package, Mark and Certification for Steel Plates (Sheets) and Strips
GB/T 710 Hot-rolled Quality Carbon Structural Steel Sheets and Strips
GB/T 912 Hot-rolled Sheets and Strips of Carbon Structural Steels and High Strength Low Alloy Structural Steels
GB/T 6397-1986 Metallic Materials — Test Pieces for Tensile Testing
