YB/T 105-2014 Methods of physical testing for metallurgical lime
Warning: Persons using this standard shall be familiar with normal laboratory practice. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
1 Scope
This standard specifies the terms and definitions, method principles, inspection methods and calculation of results for the determination of reactivity and particle size composition of metallurgical lime.
This standard is applicable to the determination of reactivity and particle size composition of metallurgical lime.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2007.7 General rules for the sampling and sample preparation of minerals in bulk - The method for determination of size by manual sieving
GB/T 6003.2 Test sieves of perforated metal plate
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
YB/T 042 Lime for metallurgical
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Reactivity test method
5 Particle size inspection method
Annex A (Normative) flowchart for specimen analysis result acceptance process
YB/T 105-2014 Methods of physical testing for metallurgical lime
Warning: Persons using this standard shall be familiar with normal laboratory practice. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions.
1 Scope
This standard specifies the terms and definitions, method principles, inspection methods and calculation of results for the determination of reactivity and particle size composition of metallurgical lime.
This standard is applicable to the determination of reactivity and particle size composition of metallurgical lime.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2007.7 General rules for the sampling and sample preparation of minerals in bulk - The method for determination of size by manual sieving
GB/T 6003.2 Test sieves of perforated metal plate
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
YB/T 042 Lime for metallurgical
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
Contents of YB/T 105-2014
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Reactivity test method
5 Particle size inspection method
Annex A (Normative) flowchart for specimen analysis result acceptance process
