Certification and Accreditation Administration of the People's Republic of China
Issued on:
July 16, 2014
Implemented on:
2014-9-1
Status:
valid
Language:
English
File Format:
PDF
Word Count:
4000 words
Price(USD):
70.0
Delivery:
via email in 1 business day
0 Introduction
On the basis of safety risks and certification risks, the Rule is prepared to specify the basic principles and requirements on implementing compulsory certification for low-voltage components and parts.
The Rule is used in association with CNCA general implementation rules like "Implementation Rule on Compulsory Certification - Selection and Determination of Classified Management and Certification Mode for Manufacturers", "Implementation Rule on Compulsory Certification - Utilization of Testing Resources and Other Certification Results of Manufacturers" and "Implementation Rule on Compulsory Certification - General Requirements of Factory Inspection".
The certification body shall, in accordance with the requirements of the general implementation rule and the Rule, prepare certification implementation rules, which shall be implemented in association with general implementation rule and the Rule.
The manufacturer shall ensure that its certified products continuously meet the requirements of certification and applicable standards.
1 Application Scope
The Rule is applicable to low-voltage components and parts whose working voltages are AC 1000V (to which AC 1140V [working voltage] electrical devices may refer) or DC 1500V and below. The following switch controllers and protectors are included.
Low-voltage circuit breaker;
Low-voltage switch, isolator, disconnector and fuse-combination unit;
Low-voltage electromechanical contactor and motor starter;
Electrical element and switching element of control circuit;
AC semiconductor motor controller and starter;
Control and protective switch;
Proximity switch;
Transfer switch;
Equipment circuit-breaker;
Electromechanical contactor for household and similar uses;
Circuit-breaker for overcurrent protection for household and similar installation;
Residual current operated circuit-breaker (with integral overcurrent protection) for household and similar uses;
Contents
0 Introduction
1 Application Scope
2 Certification Standards
3 Certification Mode
4 Certification Unit Classification
5 Certification Entrustment
5.1 Proposal and Acceptance of Certification Entrustment
5.2 Application Information
5.3 Implementation Arrangement
6 Certification Implementation
6.1 Type Test
6.2 Certification Assessment and Determination
6.3 Certification Time Limit
7 Post-certification Supervision
7.1 Post-certification Follow-up Inspection
7.2 Sample Testing/Inspection on Production Site
7.3 Market Sample Testing/Inspection
7.4 Frequency and Timing of Post-certification Supervision
7.5 Record of Post-certification Supervision
7.6 Assessment of Post-certification Supervision Result
8 Certificate
8.1 Maintenance of Certificate
8.2 Change in Covered Products of Certificate
8.3 Expansion of Certificate Covered Product
8.4 Cancellation, Suspension and Revocation of Certificate
8.5 Use of Certificate
9 Certification Mark
9.1 Allowable Pattern of Mark
9.2 Marking Mode
10 Charge
11 Certification Responsibility
12 Certification Implementation Rules
Attachment: Unit Division for Low-Voltage Components and Parts
Standard
CNCA-C03-02:2014 IMPLEMENTATION RULE ON COMPULSORY CERTIFICATION Low Voltage Apparatus –Low-voltage Components and Parts (English Version)
Standard No.
CNCA-C03-02:2014
Status
valid
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
70.0
Implemented on
2014-9-1
Delivery
via email in 1 business day
Detail of CNCA-C03-02:2014
Standard No.
CNCA-C03-02:2014
English Name
IMPLEMENTATION RULE ON COMPULSORY CERTIFICATION Low Voltage Apparatus –Low-voltage Components and Parts
Chinese Name
强制性产品认证实施规则 低压电器 低压元器件
Chinese Classification
Professional Classification
CN
ICS Classification
Issued by
Certification and Accreditation Administration of the People's Republic of China
Issued on
July 16, 2014
Implemented on
2014-9-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
4000 words
Price(USD)
70.0
Keywords
CNCA-C03-02:2014, , CNCA-C03-02:2014, CNCA,
Introduction of CNCA-C03-02:2014
0 Introduction
On the basis of safety risks and certification risks, the Rule is prepared to specify the basic principles and requirements on implementing compulsory certification for low-voltage components and parts.
The Rule is used in association with CNCA general implementation rules like "Implementation Rule on Compulsory Certification - Selection and Determination of Classified Management and Certification Mode for Manufacturers", "Implementation Rule on Compulsory Certification - Utilization of Testing Resources and Other Certification Results of Manufacturers" and "Implementation Rule on Compulsory Certification - General Requirements of Factory Inspection".
The certification body shall, in accordance with the requirements of the general implementation rule and the Rule, prepare certification implementation rules, which shall be implemented in association with general implementation rule and the Rule.
The manufacturer shall ensure that its certified products continuously meet the requirements of certification and applicable standards.
1 Application Scope
The Rule is applicable to low-voltage components and parts whose working voltages are AC 1000V (to which AC 1140V [working voltage] electrical devices may refer) or DC 1500V and below. The following switch controllers and protectors are included.
Low-voltage circuit breaker;
Low-voltage switch, isolator, disconnector and fuse-combination unit;
Low-voltage electromechanical contactor and motor starter;
Electrical element and switching element of control circuit;
AC semiconductor motor controller and starter;
Control and protective switch;
Proximity switch;
Transfer switch;
Equipment circuit-breaker;
Electromechanical contactor for household and similar uses;
Circuit-breaker for overcurrent protection for household and similar installation;
Residual current operated circuit-breaker (with integral overcurrent protection) for household and similar uses;
Contents of CNCA-C03-02:2014
Contents
0 Introduction
1 Application Scope
2 Certification Standards
3 Certification Mode
4 Certification Unit Classification
5 Certification Entrustment
5.1 Proposal and Acceptance of Certification Entrustment
5.2 Application Information
5.3 Implementation Arrangement
6 Certification Implementation
6.1 Type Test
6.2 Certification Assessment and Determination
6.3 Certification Time Limit
7 Post-certification Supervision
7.1 Post-certification Follow-up Inspection
7.2 Sample Testing/Inspection on Production Site
7.3 Market Sample Testing/Inspection
7.4 Frequency and Timing of Post-certification Supervision
7.5 Record of Post-certification Supervision
7.6 Assessment of Post-certification Supervision Result
8 Certificate
8.1 Maintenance of Certificate
8.2 Change in Covered Products of Certificate
8.3 Expansion of Certificate Covered Product
8.4 Cancellation, Suspension and Revocation of Certificate
8.5 Use of Certificate
9 Certification Mark
9.1 Allowable Pattern of Mark
9.2 Marking Mode
10 Charge
11 Certification Responsibility
12 Certification Implementation Rules
Attachment: Unit Division for Low-Voltage Components and Parts