Standard No.:	CNCA-C04-01:2014
English Name:	IMPLEMENTATION RULE ON COMPULSORY CERTIFICATION-Small Power Motors
Chinese Name:	强制性产品认证实施规则 小功率电动机
Professional Classification:	CN
Source Content Issued by:	Certification and Accreditation Administration of the People's Republic of China
Issued on:	July 16, 2014
Implemented on:	2014-9-1
Status:	valid
Target Language:	English
File Format:	PDF
Word Count:	3500 words
Translation Price(USD):	70.0
Delivery:	via email in 1 business day

1 Application Scope The Rule is applicable to small power motors for driving with the rated voltage above 36V (excluding 36V), DC 1500V and AC below 1000V, including: (1) (Where the rotational speed is converted to 1500r/min) all kinds of AC asynchronous motors and AC synchronous motors with the maximum continuous rated power not greater than 1.1kW; (2) AC commutator motors and DC motors with the maximum continuous rated power not greater than 1.1kW. Note 1: The rated power is less than or equal to the product of synchronous speed and 1.1kW/1500. Note 2: Explosion-proof motors and control motors (such as servo motor, stepping motor, selsyn, rotating transformer, tachogenerator and induction phase shifter) are excluded. Note 3: It is not applicable to multi-voltage and multi-speed motors with one quota beyond the above application scope. The adjustment of application scope caused by changes, e.g. legal or relevant product standards, technology, and industrial policy, shall be subject CNCA announcement. 2. Certification Standards GB12350 Safety Requirements of Small-power Motors GB14711 General Requirements for Safety of Small and Medium Size Rotating Electrical Machines In principle, the above standards shall implement the latest edition issued by the competent department of the National Standardization Administration. Where other editions of the standard are required, they shall be subject to the CNCA announcements which are applicable to relevant standard requirements. 3 Certification Mode The basic compulsory certification mode for small power motors is as follows: Type test + post-certification supervision; The post-certification supervision above refers to one of the three modes, i.e. post-certification follow-up inspection, sample testing/inspection on production site and market sample testing/inspection.

0 Introduction 1 Application Scope 2. Certification Standards 3 Certification Mode 4 Certification Unit Classification 5 Certification Entrustment 5.1 Proposal and Acceptance of Certification Entrustment 5.2 Application Information 5.3 Implementation Arrangement 6 Certification Implementation 6.1 Type Test 6.2 Certification Assessment and Determination 6.3 Certification Time Limit 7 Post-certification Supervision 7.1 Post-certification Follow-up Inspection 7.2 Sample Testing/Inspection on Production Site 7.3 Market Sample Testing/Inspection 7.4 Frequency and Timing of Post-certification Supervision 7.5 Record of Post-certification Supervision 7.6 Assessment of Post-certification Supervision Result 8 Certificate 8.1 Maintenance of Certificate 8.2 Change in Covered Products of Certificate 8.3 Expansion of Certificate Covered Product 8.4 Cancellation, Suspension and Revocation of Certificate 8.5 Use of Certificate 9 Certification Mark 9.1 Allowable Pattern of Mark 9.2 Marking Mode 10 Charge 11 Certification Responsibility 12 Certification Implementation Rules