GB/T 32269-2015 Aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings - General specification
1 Scope
This standard specifies the requirements for raw materials, chemical composition test, mechanical property test, heat treatment condition, stress-corrosion resistance test, dimensional tolerance, internal and general quality inspection, retest and rejection rules, certification, marking, protection and packaging of aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings.
This standard is applicable to aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings.
Note 1: The term "alloy" used throughout this standard generally refers to aluminum and aluminum-alloy.
Note 2: Values in the International System of Units (SI) are the standard values, with those in imperial units given in parentheses.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ASTM E10 Test method for Brinell hardness of metallic materials
ASTM E29 Practice for using significant digits in test data to determine conformance with specifications
ASTM E34 Test methods for chemical analysis of aluminum and aluminum-base alloys
ASTM G47 Test method for determining susceptibility to stress-corrosion cracking of 2××× and 7××× aluminum alloy products
ASTM E165 Practice for liquid penetrant examination for general industry
ASTM B211 Specification for aluminum and aluminum-alloy bar, rod, and wire
ASTM B221 Specification for aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes
NAS 410 Certification and qualification of nondestructive test personnel
ASTM B557-2010 Test methods for tension testing wrought and cast aluminum- and magnesium-alloy products
ASTM B594-2013 Practice for ultrasonic inspection of aluminum-alloy wrought products for aerospace applications
ASTM E607 Test method for atomic emission spectrometric analysis aluminum alloys by the point to plane technique nitrogen atmosphere
ASTM B660 Practices for packaging/packing of aluminum and magnesium products
ASTM E716 Practices for sampling aluminum and aluminum alloys for spectrochemical analysis
ASTM B881 Terminology relating to aluminum- and magnesium-alloy products
ASTM B918 Practice for heat treatment of wrought aluminum alloys
ASTM E1004 Test method for determining electrical conductivity using the electromagnetic (eddy-current) method
ASTM E1251 Test method for analysis of aluminum and aluminum alloys by atomic emission spectrometry
AMS 2772 Heat treatment of aluminum alloys raw materials
CEN EN 14242 Aluminum and aluminum alloys. Chemical Analysis. Inductively coupled plasma optical emission spectral analysis
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ASTM B881 apply.
4 Ordering information
4.1 Purchase orders in compliance with this standard shall include the following information:
a) This standard designation (which includes the code, the serial number, and the year);
b) Quantity or quality;
c) Material designation (see Clause 7 and Table 1);
d) Temper (see Clause 8 and Tables 2 and 3);
e) Dimensions (see Clause 13). A drawing is required for die forgings and for hand forgings whose shapes are not simple rectangles.
4.2 Additionally, purchase orders may include the following information when required by the purchaser:
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Manufacture of forgings
6 Quality assurance
7 Chemical composition
8 Mechanical properties of products as supplied
9 Heat treatment
10 Supplier confirmation of properties after heat treatment
11 Properties after heat treatment
12 Stress-corrosion resistance
13 Dimensional tolerances
14 Internal quality
15 General quality
16 Source inspection
17 Retest and rejection
18 Certification
19 Identification marking of product
20 Packaging and package marking
Annex A (Normative) Basis for inclusion of property limits
Standard
GB/T 32269-2015 Nanotechnologies—Terminology and definitions for nano-objects—Nanoparticle, nanofibre and nanoplate (English Version)
Standard No.
GB/T 32269-2015
Status
valid
Language
English
File Format
PDF
Word Count
6000 words
Price(USD)
180.0
Implemented on
2017-1-1
Delivery
via email in 1 business day
Detail of GB/T 32269-2015
Standard No.
GB/T 32269-2015
English Name
Nanotechnologies—Terminology and definitions for nano-objects—Nanoparticle, nanofibre and nanoplate
GB/T 32269-2015 Aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings - General specification
1 Scope
This standard specifies the requirements for raw materials, chemical composition test, mechanical property test, heat treatment condition, stress-corrosion resistance test, dimensional tolerance, internal and general quality inspection, retest and rejection rules, certification, marking, protection and packaging of aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings.
This standard is applicable to aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings.
Note 1: The term "alloy" used throughout this standard generally refers to aluminum and aluminum-alloy.
Note 2: Values in the International System of Units (SI) are the standard values, with those in imperial units given in parentheses.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ASTM E10 Test method for Brinell hardness of metallic materials
ASTM E29 Practice for using significant digits in test data to determine conformance with specifications
ASTM E34 Test methods for chemical analysis of aluminum and aluminum-base alloys
ASTM G47 Test method for determining susceptibility to stress-corrosion cracking of 2××× and 7××× aluminum alloy products
ASTM E165 Practice for liquid penetrant examination for general industry
ASTM B211 Specification for aluminum and aluminum-alloy bar, rod, and wire
ASTM B221 Specification for aluminum and aluminum-alloy extruded bars, rods, wire, profiles, and tubes
NAS 410 Certification and qualification of nondestructive test personnel
ASTM B557-2010 Test methods for tension testing wrought and cast aluminum- and magnesium-alloy products
ASTM B594-2013 Practice for ultrasonic inspection of aluminum-alloy wrought products for aerospace applications
ASTM E607 Test method for atomic emission spectrometric analysis aluminum alloys by the point to plane technique nitrogen atmosphere
ASTM B660 Practices for packaging/packing of aluminum and magnesium products
ASTM E716 Practices for sampling aluminum and aluminum alloys for spectrochemical analysis
ASTM B881 Terminology relating to aluminum- and magnesium-alloy products
ASTM B918 Practice for heat treatment of wrought aluminum alloys
ASTM E1004 Test method for determining electrical conductivity using the electromagnetic (eddy-current) method
ASTM E1251 Test method for analysis of aluminum and aluminum alloys by atomic emission spectrometry
AMS 2772 Heat treatment of aluminum alloys raw materials
CEN EN 14242 Aluminum and aluminum alloys. Chemical Analysis. Inductively coupled plasma optical emission spectral analysis
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ASTM B881 apply.
4 Ordering information
4.1 Purchase orders in compliance with this standard shall include the following information:
a) This standard designation (which includes the code, the serial number, and the year);
b) Quantity or quality;
c) Material designation (see Clause 7 and Table 1);
d) Temper (see Clause 8 and Tables 2 and 3);
e) Dimensions (see Clause 13). A drawing is required for die forgings and for hand forgings whose shapes are not simple rectangles.
4.2 Additionally, purchase orders may include the following information when required by the purchaser:
Contents of GB/T 32269-2015
Contents
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Manufacture of forgings
6 Quality assurance
7 Chemical composition
8 Mechanical properties of products as supplied
9 Heat treatment
10 Supplier confirmation of properties after heat treatment
11 Properties after heat treatment
12 Stress-corrosion resistance
13 Dimensional tolerances
14 Internal quality
15 General quality
16 Source inspection
17 Retest and rejection
18 Certification
19 Identification marking of product
20 Packaging and package marking
Annex A (Normative) Basis for inclusion of property limits
