JB/T 10019-1999 English Version, JB/T 10019-1999 Gear circular pitch measuring instrument (English Version)

Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/JB/T 10019-1999

JB/T 10019-1999 Gear circular pitch measuring instrument (English Version)
Standard No.:	JB/T 10019-1999	Status:	valid remind me the status change Email:
Target Language:	English	File Format:	PDF
Word Count:	4000 words	Translation Price(USD):	120.0 remind me the price change Email:
Implemented on:	2000-1-1	Delivery:	via email in 1~3 business day

→

Standard No.:	JB/T 10019-1999
English Name:	Gear circular pitch measuring instrument
Chinese Name:	齿轮齿距测量仪
Chinese Classification:	J42 Measuring tool and instrument
Professional Classification:	JB Professional Standard - Machinery
ICS Classification:	25.060.20 25.060.20 Dividing and tool-workpiece holding devices 25.060.20
Source Content Issued by:	National Technical Committee on Standardization of Metering Instrumentation
Issued on:	1999-05-20
Implemented on:	2000-1-1
Status:	valid
Superseding:	ZB J42018-1988
Target Language:	English
File Format:	PDF
Word Count:	4000 words
Translation Price(USD):	120.0
Delivery:	via email in 1~3 business day

Standard

JB/T 10019-1999 Gear circular pitch measuring instrument (English Version)
Standard No.	JB/T 10019-1999
Status	valid
Language	English
File Format	PDF
Word Count	4000 words
Price(USD)	120.0
Implemented on	2000-1-1
Delivery	via email in 1~3 business day

Detail of JB/T 10019-1999

Standard No.

English Name

Chinese Name

Chinese Classification

Professional Classification

ICS Classification

Issued by

Issued on

Implemented on

Status

Superseded by

Superseded on

Abolished on

Superseding

Language

File Format

Word Count

Price(USD)

Keywords

Introduction of JB/T 10019-1999

JB/T 10019-1999 本标准是对 ZB J42 018-88《齿轮周节测量仪》的修订，修订时根据 GB/T 10095-1988《渐开线圆柱齿轮精度》、GB/T 17164-1997《几何测量器具术语产品术语》将“齿轮周节测量仪”改称为“齿轮齿距测量仪”，并按有关规定作了编辑性修改，其他技术内容没有改变。本标准规定了齿轮齿距测量仪的型式，基本参数，技术要求，标志与包装等。本标准适用于可测齿轮模数范围为 1~20mm、直径为 630mm 以下、以相对法测量的齿轮齿距测量仪。本标准于 1988 年 2 月 22 日首次发布。

Contents of JB/T 10019-1999

Tel: +86-10-8572 5655 \| Fax: +86-10-8581 9515 \| Email: coc@codeofchina.com \| QQ: 672269886
Copyright: Beijing COC Tech Co., Ltd. 2008-2040



Keywords:
JB/T 10019-1999, JB 10019-1999, JBT 10019-1999, JB/T10019-1999, JB/T 10019, JB/T10019, JB10019-1999, JB 10019, JB10019, JBT10019-1999, JBT 10019, JBT10019