JB/T 6013-2000 English Version, JB/T 6013-2000 Diesel enging ? Requirements for low pressure hydraulc pipe assemblies (English Version)

Chinese Classification Professional Classification ICS Classification Latest News Value-added Services

Position: Chinese Standard in English/JB/T 6013-2000

JB/T 6013-2000 Diesel enging ? Requirements for low pressure hydraulc pipe assemblies (English Version)
Standard No.:	JB/T 6013-2000	Status:	superseded remind me the status change Email:
Target Language:	English	File Format:	PDF
Word Count:	8500 words	Translation Price(USD):	250.0 remind me the price change Email:
Implemented on:	2001-1-1	Delivery:	via email in 1~3 business day

→

Standard No.:	JB/T 6013-2000
English Name:	Diesel enging ? Requirements for low pressure hydraulc pipe assemblies
Chinese Name:	柴油机低压金属油管组件技术条件
Chinese Classification:	J94 Fuel oil heating system
Professional Classification:	JB Professional Standard - Machinery
Source Content Issued by:	National Technical Committee on Internal Combustion Engine Standardization
Issued on:	2000-08-31
Implemented on:	2001-1-1
Status:	superseded
Superseded by:	JB/T 6013-2011 Diesel engines — Requirements for low pressure hydraulic pipe assemblies
Superseded on:	2011-11-1
Superseding:	JB/T 6013-1992
Target Language:	English
File Format:	PDF
Word Count:	8500 words
Translation Price(USD):	250.0
Delivery:	via email in 1~3 business day

Standard

JB/T 6013-2000 Diesel enging ? Requirements for low pressure hydraulc pipe assemblies (English Version)
Standard No.	JB/T 6013-2000
Status	superseded
Language	English
File Format	PDF
Word Count	8500 words
Price(USD)	250.0
Implemented on	2001-1-1
Delivery	via email in 1~3 business day

Detail of JB/T 6013-2000

Standard No.

English Name

Chinese Name

Chinese Classification

Professional Classification

ICS Classification

Issued by

Issued on

Implemented on

Status

Superseded by

Superseded on

Abolished on

Superseding

Language

File Format

Word Count

Price(USD)

Keywords

Introduction of JB/T 6013-2000

JB/T 6013-2000 本标准是对JB/T 6013-1992《柴油机低压金属油管及接头》的修订。本标准规定了柴油机低压金属油管及接头的结构型式，技术要求，试验方法，检验规则和标志、包装、运输、贮存。本标准适用于气缸直径在200mm以内的柴油机低压油管组件。其基本压力为2.5MPa，基本通径在3~25mm范围内。本标准于1983年3月以GB 3540~3541-83首次发布，于1992年5月第一次修订为JB/T 6013-92。

Contents of JB/T 6013-2000

Tel: +86-10-8572 5655 \| Fax: +86-10-8581 9515 \| Email: coc@codeofchina.com \| QQ: 672269886
Copyright: Beijing COC Tech Co., Ltd. 2008-2040



Keywords:
JB/T 6013-2000, JB 6013-2000, JBT 6013-2000, JB/T6013-2000, JB/T 6013, JB/T6013, JB6013-2000, JB 6013, JB6013, JBT6013-2000, JBT 6013, JBT6013