Article 1.0.1 This regulation is formulated with a view to implementing the relevant national specifications on building fire protection, protecting the steel structures by adopting fire resistive coating, improving the fire endurance of steel structures, accomplishing safety, credibility, state-of-art technology and economic feasibility.
Article 1.0.2 This regulation is applicable to design, construction and acceptance check of the fire resistive coating of the steel structures of buildings and construction works.
Article 1.0.3 The application of fire resistive coating for steel structure not only shall conform to this regulation, but also shall comply with the relevant fire prevention codes and the other current regulations.
Chapter 1 General Provisions 1
Chapter 2 Fire Resistive Coating and Coating Thickness 2
Chapter 3 Construction of Fire Resistive Coating for Steel Structure 4
Section 1 General Provisions 4
Section 2 Quality Requirements 4
Section 3 Construction of Thin Fire Resistive Coating for Steel Structure 4
Section 4 Construction of Thick Fire Resistive Coating for Steel Structure 5
Chapter 4 Engineering Acceptance 6
Annex 1 Glossary 7
Annex 2 Test Method of Fire Resistive Coating for Steel Structure 8
Annex 3 Calculation Method for Application Thickness of the Fire Resistive Coating for Steel Structure 12
Annex 4 Measuring Method for the Coating Thickness of Fire Resistive Coatings for Steel Structure 13
Annex 5 Explanation of Wording in This Regulation 15
Additional Information 16
