1 Application scope
The Rules are applicable to hydraulic, pneumatic and vacuum brake hoses and brake hose assembly products (hereinafter referred to as "brake hoses") for automobiles, motorcycles, mopeds and trailers. They also can be used as an inference for other brake hose products of motor vehicles.
Any adjustment to the application scope caused by any change(s) in laws and regulations, related product standards, technologies, industrial polices and other factors shall be subject to the announcement issued by China Quality Certification Centre (CQC).
2 Certification mode
The certification mode for brake hose products is type test + initial factory inspection + post-certification supervision.
The basic certification steps include:
a. Application for certification
b. Product type test
c. Initial factory inspection
d. Evaluation and approval of certification results
e. Post-certification supervision
Initial factory inspection is carried out in accordance with the requirements applied to conformity of production (CoP) inspection. According to the different organization and production modes and characteristics of products, differentiated CoP inspection and post-certification supervision may be adopted in specific implementation.
3 Application for certification
3.1 Division of certification unit
In principle, brake hose products produced by the same producer (manufacturer) and the same production enterprise (workplace) without significant differences in the following aspects are regarded as one certification unit:
(1) Braking energy transfer mode (hydraulic, pneumatic and vacuum);
(2) Material of brake hose;
(3) Mode of connection between hose end fitting and hose.
The applicant shall file the application for certification according to the unit division principle. A unit may include products of multiple models. The same model refers to the products that have no impact on the standard compliance in design.
The same products produced by the same producer and different production enterprise (they shall be manufactured with the same production process and with the same key part/raw material suppliers), or the same products produced by different producers and the same production enterprise, shall be divided into different application units, but the type test may only be carried out on the samples of one unit. For the products of other production enterprises/producers, the data for conformity inspection shall be provided for such purpose.
3.2 Submittals for certification application
The applicant shall file the application for certification to the CQC through the website (www.cqc.com.cn), and shall fill in the necessary enterprise information and product information as required. The CQC will, according to relevant requirements, review the application and issue a notice of accepting or rejecting the application, or request the applicant to re-file an application for certification after rectification.
The applicant shall provide relevant application data and technical data to the CQC and/or the entrusted laboratory according to the requirements of the certification scheme after the application is accepted, generally including:
(1) Application form for certification;
(2) Certification materials:
a. Registration certificates of the applicant, producer and production enterprise, such as business license (at initial application or in case of any change);
b. If the three parties are not the same enterprise, the relevant agreements or contracts signed by the relevant parties (such as entrusted processing agreement, authorization letter, etc.) shall also be submitted (if applicable);
c. If the applicant is a seller or an importer, it must also submit copy of the relevant contract concluded between the seller and the producer or between the importer and the producer (at initial application or in case of any change);
d. The power of attorney of the agent (if applicable);
e. Certificates of domestic entity that can bear legal responsibilities in case of an overseas production enterprise (when required by relevant laws and regulations).
(3) Technical data such as product description, photos and product drawings;
For each certification unit, the applicant shall provide technical data such as product description, photos and product drawings according to the requirements of Annex 1 to the Rules. In case multiple models/specifications are included in the same unit, a description of the difference between different models shall also be provided. It is required to fill in the technical data according to the specific technical document format issued by the CQC and submit the electronic data.
(4) List of key parts/raw materials;
For each certification unit, the list of key parts/raw materials shall be provided according to the requirements of Annex 1 to the Rules. For the key parts/raw materials within the scope of compulsory product certification purchased in China, the production enterprise shall provide the China compulsory product certification certificate; for other parts/raw materials, the production enterprise may provide corresponding voluntary certification certificates or valid test reports issued by laboratories recognized in accordance with GB/T 27025 (ISO/IEC 17025).
(5) CoP control plan prepared according to Annex 2 to the Rules (at initial application or in case of any change);
(6) Factory inspection questionnaire (if applicable); and
(7) Other necessary documents.
4 Type test
4.1 Type test scheme
Foreword I
1 Application scope
2 Certification mode
3 Application for certification
3.1 Division of certification unit
3.2 Submittals for certification application
4 Type test
4.1 Type test scheme
4.2 Requirements for type test samples
4.3 Reference standards and test items
4.4 Implementation of type test
4.5 Disposal of samples
4.6 Type test report
4.7 Utilization of enterprise testing resources
5 Initial factory inspection
5.1 Basic requirements
5.2 Review of CoP control plan
5.3 Factory on-site inspection
6 Evaluation and approval of certification results
6.1 Certification evaluation and decision
6.2 Evaluation and decision on maintenance parts of discontinued-production models
6.3 Certification time limit
7 Post-certification supervision
7.1 Time of post-certification supervision
7.2 CoP supervisory inspection
7.3 Supervisory sampling testing or inspection
7.4 Evaluation of post-certification follow-up inspection results
8 Certification certificate
8.1 Maintenance of certification certificate
8.2 Change of certification certificate
8.3 Cancellation, suspension and revocation of certification certificate
8.4 Electric certificate
8.5 Certificate issuance for the same manufacturer
9 Use of product certification mark
9.1 Mark permitted to use
9.2 Use of deformation certification mark
9.3 Mark application method
9.4 Mark application position
10 Certification charge
11 Technical dispute and appeal
12 Others
Annex 1 Description of brake hose products for motor vehicles
Annex 2 CoP requirements
Appendix 1 Requirements for factory quality assurance capability
Appendix 2 Requirements of CoP control plan
Appendix 3 Requirements for implementation report of CoP control plan
Annex 3 Certification implementation of after-sale maintenance spare parts for discontinued-production models
Annex 4 Measures for classification management of production enterprises
Standard
CQC16-491284-2022 Certification Rules for Brake Hose of Motor Vehicles (English Version)
Standard No.
CQC16-491284-2022
Status
valid
Language
English
File Format
PDF
Word Count
9500 words
Price(USD)
580.0
Implemented on
2023-1-1
Delivery
via email in 1 business day
Detail of CQC16-491284-2022
Standard No.
CQC16-491284-2022
English Name
Certification Rules for Brake Hose of Motor Vehicles
Chinese Name
机动车制动软管认证规则
Chinese Classification
Professional Classification
CQ
ICS Classification
Issued by
CQC
Issued on
2022-12-30
Implemented on
2023-1-1
Status
valid
Superseded by
Superseded on
Abolished on
Superseding
Language
English
File Format
PDF
Word Count
9500 words
Price(USD)
580.0
Keywords
CQC16-491284-2022, , CQC16-491284-2022, CQC16,
Introduction of CQC16-491284-2022
1 Application scope
The Rules are applicable to hydraulic, pneumatic and vacuum brake hoses and brake hose assembly products (hereinafter referred to as "brake hoses") for automobiles, motorcycles, mopeds and trailers. They also can be used as an inference for other brake hose products of motor vehicles.
Any adjustment to the application scope caused by any change(s) in laws and regulations, related product standards, technologies, industrial polices and other factors shall be subject to the announcement issued by China Quality Certification Centre (CQC).
2 Certification mode
The certification mode for brake hose products is type test + initial factory inspection + post-certification supervision.
The basic certification steps include:
a. Application for certification
b. Product type test
c. Initial factory inspection
d. Evaluation and approval of certification results
e. Post-certification supervision
Initial factory inspection is carried out in accordance with the requirements applied to conformity of production (CoP) inspection. According to the different organization and production modes and characteristics of products, differentiated CoP inspection and post-certification supervision may be adopted in specific implementation.
3 Application for certification
3.1 Division of certification unit
In principle, brake hose products produced by the same producer (manufacturer) and the same production enterprise (workplace) without significant differences in the following aspects are regarded as one certification unit:
(1) Braking energy transfer mode (hydraulic, pneumatic and vacuum);
(2) Material of brake hose;
(3) Mode of connection between hose end fitting and hose.
The applicant shall file the application for certification according to the unit division principle. A unit may include products of multiple models. The same model refers to the products that have no impact on the standard compliance in design.
The same products produced by the same producer and different production enterprise (they shall be manufactured with the same production process and with the same key part/raw material suppliers), or the same products produced by different producers and the same production enterprise, shall be divided into different application units, but the type test may only be carried out on the samples of one unit. For the products of other production enterprises/producers, the data for conformity inspection shall be provided for such purpose.
3.2 Submittals for certification application
The applicant shall file the application for certification to the CQC through the website (www.cqc.com.cn), and shall fill in the necessary enterprise information and product information as required. The CQC will, according to relevant requirements, review the application and issue a notice of accepting or rejecting the application, or request the applicant to re-file an application for certification after rectification.
The applicant shall provide relevant application data and technical data to the CQC and/or the entrusted laboratory according to the requirements of the certification scheme after the application is accepted, generally including:
(1) Application form for certification;
(2) Certification materials:
a. Registration certificates of the applicant, producer and production enterprise, such as business license (at initial application or in case of any change);
b. If the three parties are not the same enterprise, the relevant agreements or contracts signed by the relevant parties (such as entrusted processing agreement, authorization letter, etc.) shall also be submitted (if applicable);
c. If the applicant is a seller or an importer, it must also submit copy of the relevant contract concluded between the seller and the producer or between the importer and the producer (at initial application or in case of any change);
d. The power of attorney of the agent (if applicable);
e. Certificates of domestic entity that can bear legal responsibilities in case of an overseas production enterprise (when required by relevant laws and regulations).
(3) Technical data such as product description, photos and product drawings;
For each certification unit, the applicant shall provide technical data such as product description, photos and product drawings according to the requirements of Annex 1 to the Rules. In case multiple models/specifications are included in the same unit, a description of the difference between different models shall also be provided. It is required to fill in the technical data according to the specific technical document format issued by the CQC and submit the electronic data.
(4) List of key parts/raw materials;
For each certification unit, the list of key parts/raw materials shall be provided according to the requirements of Annex 1 to the Rules. For the key parts/raw materials within the scope of compulsory product certification purchased in China, the production enterprise shall provide the China compulsory product certification certificate; for other parts/raw materials, the production enterprise may provide corresponding voluntary certification certificates or valid test reports issued by laboratories recognized in accordance with GB/T 27025 (ISO/IEC 17025).
(5) CoP control plan prepared according to Annex 2 to the Rules (at initial application or in case of any change);
(6) Factory inspection questionnaire (if applicable); and
(7) Other necessary documents.
4 Type test
4.1 Type test scheme
Contents of CQC16-491284-2022
Foreword I
1 Application scope
2 Certification mode
3 Application for certification
3.1 Division of certification unit
3.2 Submittals for certification application
4 Type test
4.1 Type test scheme
4.2 Requirements for type test samples
4.3 Reference standards and test items
4.4 Implementation of type test
4.5 Disposal of samples
4.6 Type test report
4.7 Utilization of enterprise testing resources
5 Initial factory inspection
5.1 Basic requirements
5.2 Review of CoP control plan
5.3 Factory on-site inspection
6 Evaluation and approval of certification results
6.1 Certification evaluation and decision
6.2 Evaluation and decision on maintenance parts of discontinued-production models
6.3 Certification time limit
7 Post-certification supervision
7.1 Time of post-certification supervision
7.2 CoP supervisory inspection
7.3 Supervisory sampling testing or inspection
7.4 Evaluation of post-certification follow-up inspection results
8 Certification certificate
8.1 Maintenance of certification certificate
8.2 Change of certification certificate
8.3 Cancellation, suspension and revocation of certification certificate
8.4 Electric certificate
8.5 Certificate issuance for the same manufacturer
9 Use of product certification mark
9.1 Mark permitted to use
9.2 Use of deformation certification mark
9.3 Mark application method
9.4 Mark application position
10 Certification charge
11 Technical dispute and appeal
12 Others
Annex 1 Description of brake hose products for motor vehicles
Annex 2 CoP requirements
Appendix 1 Requirements for factory quality assurance capability
Appendix 2 Requirements of CoP control plan
Appendix 3 Requirements for implementation report of CoP control plan
Annex 3 Certification implementation of after-sale maintenance spare parts for discontinued-production models
Annex 4 Measures for classification management of production enterprises
