1 Scope
This standard specifies the classification, requirements, test and inspection methods, inspection rules, marking, packaging, transportation and storage of polyester grey fabric.
This standard is applicable to the polyester grey fabric (excluding special fabric) produced by polyester staple fibre spinning and weaving.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 406-2008 Cotton Grey Fabric
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Breaking Force Using the Strip Method
GB/T 4666 Textiles - Fabrics - Determination of Width and Length
GB/T 4668 Textiles - Woven Fabrics - Determination of Number of Threads per Unit Length
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement of Limiting Values
FZ/T 10004 Inspection Rules for Gray Fabrics of Cotton, Man-made Fibres and Their Blends
FZ/T 10009 Marking and Packing for Gray Pure Cotton, Pure Chemical or Blended Fabric
3 Classification
The variety and specification classification of polyester grey fabric are determined according to user's demand and those specified in Annex A.
4 Requirements
4.1 Item
Foreword i
1 Scope
2 Normative References
3 Classification
4 Requirements
5 Test and Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
8 Others
Annex A (Normative) Requirements for Technical Conditions Preparation
Annex B (Normative) Specific Contents of Various Surface Defects
Annex C (Normative) Explanation on Defect Name
1 Scope
This standard specifies the classification, requirements, test and inspection methods, inspection rules, marking, packaging, transportation and storage of polyester grey fabric.
This standard is applicable to the polyester grey fabric (excluding special fabric) produced by polyester staple fibre spinning and weaving.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 406-2008 Cotton Grey Fabric
GB/T 3923.1 Textiles - Tensile Properties of Fabrics - Part 1: Determination of Maximum Force and Elongation at Maximum Breaking Force Using the Strip Method
GB/T 4666 Textiles - Fabrics - Determination of Width and Length
GB/T 4668 Textiles - Woven Fabrics - Determination of Number of Threads per Unit Length
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement of Limiting Values
FZ/T 10004 Inspection Rules for Gray Fabrics of Cotton, Man-made Fibres and Their Blends
FZ/T 10009 Marking and Packing for Gray Pure Cotton, Pure Chemical or Blended Fabric
3 Classification
The variety and specification classification of polyester grey fabric are determined according to user's demand and those specified in Annex A.
4 Requirements
4.1 Item
Contents of FZ/T 13035-2016
Foreword i
1 Scope
2 Normative References
3 Classification
4 Requirements
5 Test and Test Methods
6 Inspection Rules
7 Marking, Packaging, Transportation and Storage
8 Others
Annex A (Normative) Requirements for Technical Conditions Preparation
Annex B (Normative) Specific Contents of Various Surface Defects
Annex C (Normative) Explanation on Defect Name
