FZ/T 71006-2021 Cashmere knitting yarn
1 ScopeThis document specifies the technical requirements, test methods, inspection rules, acceptance rules,packaging and marking of cashmere knitting yarn.
This document is applicable to evaluation of the quality of worsted, woollen and semi-worsted, pure andblended knitting yarn with cashmere content of no less than 30%.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references, only the edition cited applies. For undatedreferences, the latest edition ofthe referenced document (including any amendments) applies.
GBIT 250 Textiles Tests for colour fastness Grey scale for assessing change in colour
GB/T 2910 (All parts) Textiles -Quantitative chemical analysis
GB/T 4802.3 Textiles - Determination of fabric propensity to surface fuzzing and to pilling Part3:Pilling box method
GB/T 4841.3 Colour cards ofstandard depths for dyeing with dyestufs 2', 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for use ofproducts ofconsumer interest-Part 4: Textiles and apparelGB/T 5706-2018 Textiles-Wool textile products ferminology
GB/T 9994 Conventional moisture regains oftextile materials
GB/T 10685 Wool determination offber diameter-Projection microscope method
3 Terms and definitions
No terms and definitions are listed in this document
4 Technical requirements
4.1 Safety requirements
The basic safety technical requirements of cashmere knitting yarh shall comply with provisions specifiedin GB 18401, and the basic safety technical requirements ofi infants’ and children's products shall complywith provisions specified in GB 31701.
4.2 Grading requirements
The grade of cashmere knitting yarn shall be classified by batch and comprehensively assessed on bothinteral quality and appearance quality, it is classified into superior grade, first grade and qualified grade,and the grade of a batch shall be evaluated based on the lowest grade of a single item.
4.3 Evaluation of internal quality
4.3.1 The internal quality shall be graded based on batch, The batch grade is determined by a single item with the lowest assessment result.
4.3.2 The internal qual ity shall be graded as specified in Table 1.
FZ/T 71006-2021 Cashmere knitting yarn
1 ScopeThis document specifies the technical requirements, test methods, inspection rules, acceptance rules,packaging and marking of cashmere knitting yarn.
This document is applicable to evaluation of the quality of worsted, woollen and semi-worsted, pure andblended knitting yarn with cashmere content of no less than 30%.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references, only the edition cited applies. For undatedreferences, the latest edition ofthe referenced document (including any amendments) applies.
GBIT 250 Textiles Tests for colour fastness Grey scale for assessing change in colour
GB/T 2910 (All parts) Textiles -Quantitative chemical analysis
GB/T 4802.3 Textiles - Determination of fabric propensity to surface fuzzing and to pilling Part3:Pilling box method
GB/T 4841.3 Colour cards ofstandard depths for dyeing with dyestufs 2', 1/3, 1/6, 1/12, 1/25
GB/T 5296.4 Instructions for use ofproducts ofconsumer interest-Part 4: Textiles and apparelGB/T 5706-2018 Textiles-Wool textile products ferminology
GB/T 9994 Conventional moisture regains oftextile materials
GB/T 10685 Wool determination offber diameter-Projection microscope method
3 Terms and definitions
No terms and definitions are listed in this document
4 Technical requirements
4.1 Safety requirements
The basic safety technical requirements of cashmere knitting yarh shall comply with provisions specifiedin GB 18401, and the basic safety technical requirements ofi infants’ and children's products shall complywith provisions specified in GB 31701.
4.2 Grading requirements
The grade of cashmere knitting yarn shall be classified by batch and comprehensively assessed on bothinteral quality and appearance quality, it is classified into superior grade, first grade and qualified grade,and the grade of a batch shall be evaluated based on the lowest grade of a single item.
4.3 Evaluation of internal quality
4.3.1 The internal quality shall be graded based on batch, The batch grade is determined by a single item with the lowest assessment result.
4.3.2 The internal qual ity shall be graded as specified in Table 1.
