GB 2007.6-1987 General rules for the sampling and sample preparation of minerals in bulk-Determination of moisture content-Heat drying method (English Version)
General rules for the sampling and sample preparation of minerals in bulk - Determination of moisture content - Heat drying method
1 Scope
This standard is applicable to the determination of moisture content of ores described in GB 2007.1, but not applicable to some easily oxidized sulfide ores.
2 Normative references
GB 2007.1 General rules for the sampling and sample preparation of minerals in bulk-Sampling by manual method
GB 2007.2 General rules for the sampling and sample preparation of minerals in bulk-Manual method of sample preparation
3 Apparatus
3.1 Drying tray: a stainless metal tray with smooth and clean surface, which can accommodate a specified number of specimens with layer thickness not exceeding 31.5 mm
3.2 Drying oven: it is provided with a temperature control device which makes the temperature error less than ±5℃, and with a blower device that may make the airflow in the drying oven without blowing away the specimen.
3.3 Balance: with a maximum weighing amount of 3,000 g and a sensitivity of 0.1 g.
4 Samples
Sampling and sample preparation according to relevant standards. For samples that are too wet or sticky to sieve, break and shrink, the samples may be pre-dried until no difficulty occurs in sample preparation (see Annex A). The minimum mass of the required moisture specimen is shown in Table 1.
1 Application Scope
2 Normative References
3 Instruments
4 Samples
5 Determination
6 Expressions of Calculation and Result
Appendix A Determination Method of Water Content for Clammy Ore (Additional)
Appendix B Correction of Sprayed and Rain Water (Additional)
GB 2007.6-1987 General rules for the sampling and sample preparation of minerals in bulk-Determination of moisture content-Heat drying method (English Version)
Standard No.
GB 2007.6-1987
Status
valid
Language
English
File Format
PDF
Word Count
3000 words
Price(USD)
60.0
Implemented on
1988-10-1
Delivery
via email in 1 business day
Detail of GB 2007.6-1987
Standard No.
GB 2007.6-1987
English Name
General rules for the sampling and sample preparation of minerals in bulk-Determination of moisture content-Heat drying method
General rules for the sampling and sample preparation of minerals in bulk - Determination of moisture content - Heat drying method
1 Scope
This standard is applicable to the determination of moisture content of ores described in GB 2007.1, but not applicable to some easily oxidized sulfide ores.
2 Normative references
GB 2007.1 General rules for the sampling and sample preparation of minerals in bulk-Sampling by manual method
GB 2007.2 General rules for the sampling and sample preparation of minerals in bulk-Manual method of sample preparation
3 Apparatus
3.1 Drying tray: a stainless metal tray with smooth and clean surface, which can accommodate a specified number of specimens with layer thickness not exceeding 31.5 mm
3.2 Drying oven: it is provided with a temperature control device which makes the temperature error less than ±5℃, and with a blower device that may make the airflow in the drying oven without blowing away the specimen.
3.3 Balance: with a maximum weighing amount of 3,000 g and a sensitivity of 0.1 g.
4 Samples
Sampling and sample preparation according to relevant standards. For samples that are too wet or sticky to sieve, break and shrink, the samples may be pre-dried until no difficulty occurs in sample preparation (see Annex A). The minimum mass of the required moisture specimen is shown in Table 1.
Contents of GB 2007.6-1987
1 Application Scope
2 Normative References
3 Instruments
4 Samples
5 Determination
6 Expressions of Calculation and Result
Appendix A Determination Method of Water Content for Clammy Ore (Additional)
Appendix B Correction of Sprayed and Rain Water (Additional)
