1 Scope
This standard specifies requirements for bonded abrasive products, including terms and definitions, symbols and abbreviations regarding safety requirement as well as list of significant hazards, safety technical requirements, test methods, inspection rules, acceptance and storage, installation and usage.
This standard is applicable to bonded abrasive products.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2484 Bonded Abrasive Products - General Requirements
GB/T 2485 Bonded abrasive Products - Technical Specifications
GB/T 2492 Bonded Abrasive Products - Permissible Unbalances of Grinding Wheels as Delivered - Testing
GB/T 2493 Rotation Test of Grinding Wheel Strength
GB 4674 Safety Code for Grinding Machines
GB/T 16458 Terminology for Abrasives and Abrasive Products
GB/T 17588 Basic Terminology for Grinding Processes Using Grinding Wheels
JB/T 4175 Bonded Abrasive Products – Fiber Reinforced Resinoid Bond Cutting-off Wheel
JB/T 7992 Bonded Abrasive Products - Test Method of Appearance, Dimensions and Geometrical Tolerancing
JB/T 10450 Bonded Abrasive Products - Inspection Rules
3 Terms and Definitions
For the purposes of this document, the following terms and definitions given in GB/T 16458 and GB/T 17588 as well as the following apply.
3.1 Grinding machine
3.1.1
stationary machines
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Abbreviations
5 List of Significant Hazards
6 Safety Technical Requirements
7 Test Methods
8 Inspection Rules
9 Acceptance and Storage
10 Installation and Usage
Annex A (Informative) Mounted Points with Spindle
1 Scope
This standard specifies requirements for bonded abrasive products, including terms and definitions, symbols and abbreviations regarding safety requirement as well as list of significant hazards, safety technical requirements, test methods, inspection rules, acceptance and storage, installation and usage.
This standard is applicable to bonded abrasive products.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 2484 Bonded Abrasive Products - General Requirements
GB/T 2485 Bonded abrasive Products - Technical Specifications
GB/T 2492 Bonded Abrasive Products - Permissible Unbalances of Grinding Wheels as Delivered - Testing
GB/T 2493 Rotation Test of Grinding Wheel Strength
GB 4674 Safety Code for Grinding Machines
GB/T 16458 Terminology for Abrasives and Abrasive Products
GB/T 17588 Basic Terminology for Grinding Processes Using Grinding Wheels
JB/T 4175 Bonded Abrasive Products – Fiber Reinforced Resinoid Bond Cutting-off Wheel
JB/T 7992 Bonded Abrasive Products - Test Method of Appearance, Dimensions and Geometrical Tolerancing
JB/T 10450 Bonded Abrasive Products - Inspection Rules
3 Terms and Definitions
For the purposes of this document, the following terms and definitions given in GB/T 16458 and GB/T 17588 as well as the following apply.
3.1 Grinding machine
3.1.1
stationary machines
Contents of GB 2494-2014
Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Symbols and Abbreviations
5 List of Significant Hazards
6 Safety Technical Requirements
7 Test Methods
8 Inspection Rules
9 Acceptance and Storage
10 Installation and Usage
Annex A (Informative) Mounted Points with Spindle
