Standard No.:	GB 32375-2025
English Name:	Safety technical specification for production of calcium carbide
Chinese Name:	电石生产安全技术规范
Chinese Classification:	C66    Safety control technology
Professional Classification:	GB    National Standard
Source Content Issued by:	SAMR; SAC
Issued on:	2025-10-05
Implemented on:	2026-9-1
Status:	to be valid
Superseding:	GB/T 32375-2015 Rules of safety technology of produced calcium carbide
Target Language:	English
File Format:	PDF
Word Count:	8500 words
Translation Price(USD):	255.0
Delivery:	via email in 1~3 business day

GB 32375-2025 Safety technical specification for production of calcium carbide English, Anglais, Englisch, Inglés, えいご This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation， self-check， revision and verification) will be delivered upon being ordered. ICS 13.100 CCS C 66 National Standard of the People's Republic of China GB 32375-2025 Replaces GB/T 32375-2015 Safety technical specification for production of calcium carbide Issue date: 2025-10-05 Implementation date: 2026-09-01 Issued by the State Administration for Market Regulation the Standardization Administration of the People's Republic of China Contents Foreword 1 Scope 2 Normative references 3 Terms and definitions 4 Basic requirements 5 Production safety 6 Storage safety 7 Abnormal operating condition handling 8 Emergency disposal Safety technical specification for production of calcium carbide 1 Scope This document specifies the basic requirements for calcium carbide production enterprises, as well as the requirements for production safety, storage safety, abnormal operating condition handling, and emergency disposal, and describes the corresponding verification methods. This document applies to the production, storage, abnormal operating condition handling, and emergency disposal of calcium carbide production enterprises. 2 Normative references The following documents contain requirements which, through reference in this text, constitute provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB/T 567.2 Bursting disc safety devices - Part 2: Application, selection and installation GB/T 4208 Degrees of protection provided by enclosures (IP code) GB 12158 General requirements for preventing electrostatic accidents GB 15603 General rules for the hazardous chemicals warehouse storage GB 17681 Technical specifications for safety monitoring and control of major hazard installations of hazardous chemicals GB 21148 Foot protection - Safety footwear GB/T 29639 Guidelines for enterprises to develop emergency response plan for work place accidents GB 30077 Requirements on emergency materials equipment for hazardous chemical enterprises GB 30871 Safety code of special work in chemical manufactory GB 36894 Risk criteria for hazardous chemicals production unit and storage installations GB/T 37243 Methods for determining external safety distances of hazardous chemicals production units and storage installations GB 38306 Hand protection - Gloves against thermal hazards 3 Terms and definitions The following terms and definitions apply to this document. 3.1 electrode container cylindrical conductive mold for holding unsintered electrode paste 3.2 calcium carbide cooling plant place for cooling incandescent calcium carbide in calcium carbide production process 3.3 calcium carbide warehouse warehouse for storing cooled calcium carbide 3.4 indirect closed recirculating cooling water system circulating cooling water system where circulating cooling water exchanges heat indirectly with cooled medium and circulating cooling water also exchanges heat indirectly with cooling medium 4 Basic requirements 4.1 Security fundamentals management 4.1.1 Enterprises shall formulate process indicators for the height of electrode paste columns, and establish accounts for the type of paste used, dosage and paste column height. 4.1.2 Enterprises shall formulate maintenance systems for gas-fired hot blast stoves, calcium carbide furnace covers, electrode holders, furnace gas purification/treatment/holders, high-voltage electrical equipment, and in-furnace inspections/maintenances, as well as operation systems for abnormal working conditions (e.g., electrode measurement, charge level treatment, tapping & oxygen blowing, furnace cleaning). Work approval is required before operation. 4.1.3 The calcium carbide furnace gas holder shall undergo minor maintenance annually, medium maintenance every 3 years, and major maintenance every 5 years. A maintenance plan and account shall be prepared before maintenance, complying with AQ3026. For special matters directly affecting safety, timely maintenance is required. 4.1.4 When patrolling areas with toxic gas leakage risks (e.g., calcium carbide furnace workshops, furnace gas purification/treatment facilities), portable carbon monoxide detectors must be carried. Evacuate immediately if carbon monoxide exceeds the standard. 4.2 Site selection and layout 4.2.1 Site selection and general layout of new, renovated or expanded calcium carbide projects shall comply with GB 50187, GB 50016 and GB 55037. 4.2.2 Calcium carbide furnace workshops and calcium carbide cooling workshops shall be arranged on the leeward side of the minimum annual frequency wind direction of facilities such as devices and tank farms that may emit flammable gases. 4.2.3 Calcium carbide furnace, cooling, conveying trestle, crushing workshops and warehouses shall be located in areas with low groundwater level, high terrain and dry site. 4.2.4 The external safety protection distance shall be determined in accordance with the requirements of GB/T 37243, and the individual risk and social risk shall comply with the provisions of GB 36894. 4.2.5 The minimum horizontal distance between calcium carbide cooling workshops, calcium carbide crushing workshops, calcium carbide warehouses and cooling towers shall comply with the provisions of Table 1. 4.2.6 The flood control requirements for calcium carbide furnace workshops, calcium carbide cooling workshops, calcium carbide conveying trestles, calcium carbide crushing workshops and calcium carbide warehouses shall comply with the provisions of GB 50201. 4.3 Buildings 4.3.1 According to the classification of fire hazards, the fire protection design of main factory buildings (structures) shall meet the following requirements: a) The fire hazard category of calcium carbide crushing workshops and calcium carbide warehouses is Class A; b) The fire hazard category of furnace gas purification, furnace gas treatment and furnace gas holders is Class A; c) The fire hazard category of carbon material warehouses, carbon material drying workshops, batching stations and electrode paste warehouses is Class C; d) The fire hazard category of calcium carbide furnace workshops and calcium carbide cooling workshops is Class D; e) The fire hazard category of lime production workshops with gas facilities or fuel bins covering an area of less than 5% is Class D.