Article 1.0.1 This code is made to implement seriously the relevant national technical and economical policies in the design of substations so as to meet the requirements of safety and reliable operation, advanced technology and rationality and economy.
Article 1.0.2 This code applies to the design of newly built substations with voltage of 35 ~ 110kV, capacity of single transformer of 5000kVA and above.
Article 1.0.3 The design of substation shall be based on the 5 ~ 10 years planning for the project; both the short and long-term planning shall be taken into consideration, with the stress on the short-term; the relationship between the short-term construction and the long-term development shall be handled correctly and proper consideration shall be given to the possibility of future extension.
Article 1.0.4 The design of substation must be based on the overall situation giving an allround consideration to the design scheme according to the load nature, power consumption capacity, project characteristics and the regional power supply conditions, and determined rationally according to China’s reality.
Article 1.0.5 The design of substation must follow the principle of saving on land.
Article 1.0.6 The design of substation must also comply with the relevant national codes and standards currently in force, in addition to implementing this code.
Contents
Chapter 1 General
CHAPTER 2 SITE SELECTION AND ARRANGEMENT
CHAPTER 3 ELECTRICAL PART
Section 1 Main transformer
Section 2 Electrical main wiring
Section 3 Substation power supply and operation power supply
Section 4 Control room
Section 5 Secondary wiring
Section 6 Lighting
Section 7 Capacitor units in parallel
Section 8 Cable laying
Section 9 Remote control and communication
Section 10 Indoor and outdoor power distribution devices
Section 11 Relay protection and automatic devices
Section 12 Electrical measuring instrument devices
Section 13 Over-voltage protections
Section 14 Earthing
CHAPTER 4 CIVIL WORKS
Section 1 General Regulations
Section 2 Load
Section 3 Buildings
Section 4 Structures
Section 5 Heating and ventilation
Section 6 Fire prevention
Appendix I Minimum Horizontal Net Distance Between Underground Pipelines
Appendix II Minimum Net Vertical Distance for Crossing of Underground Pipelines and for Crossing Pipeline with Road
Appendix III Limit of Deflection and Cracking
Appendix IV Evenly Distributed Live Load of Buildings and Relevant Factors
Appendix V Maximum Distance of Anti Seismic Transverse Brick Walls
Appendix VI Limit of Local Size of Multi-story Brick Bearing Buildings
Type
Appendix VII Calculated Length of Pressed Rod Inside and Outside the Plane of Λ-shape Column
Appendix VIII Calculated Length of Pressed Rod
Appendix IX Minimum Fire Resistance Class for Buildings and Structures of Substation
Appendix X Minimum Fire prevention Net Distance for Buildings, Structures and Equipment
Article 1.0.1 This code is made to implement seriously the relevant national technical and economical policies in the design of substations so as to meet the requirements of safety and reliable operation, advanced technology and rationality and economy.
Article 1.0.2 This code applies to the design of newly built substations with voltage of 35 ~ 110kV, capacity of single transformer of 5000kVA and above.
Article 1.0.3 The design of substation shall be based on the 5 ~ 10 years planning for the project; both the short and long-term planning shall be taken into consideration, with the stress on the short-term; the relationship between the short-term construction and the long-term development shall be handled correctly and proper consideration shall be given to the possibility of future extension.
Article 1.0.4 The design of substation must be based on the overall situation giving an allround consideration to the design scheme according to the load nature, power consumption capacity, project characteristics and the regional power supply conditions, and determined rationally according to China’s reality.
Article 1.0.5 The design of substation must follow the principle of saving on land.
Article 1.0.6 The design of substation must also comply with the relevant national codes and standards currently in force, in addition to implementing this code.
Contents of GB 50059-1992
Contents
Chapter 1 General
CHAPTER 2 SITE SELECTION AND ARRANGEMENT
CHAPTER 3 ELECTRICAL PART
Section 1 Main transformer
Section 2 Electrical main wiring
Section 3 Substation power supply and operation power supply
Section 4 Control room
Section 5 Secondary wiring
Section 6 Lighting
Section 7 Capacitor units in parallel
Section 8 Cable laying
Section 9 Remote control and communication
Section 10 Indoor and outdoor power distribution devices
Section 11 Relay protection and automatic devices
Section 12 Electrical measuring instrument devices
Section 13 Over-voltage protections
Section 14 Earthing
CHAPTER 4 CIVIL WORKS
Section 1 General Regulations
Section 2 Load
Section 3 Buildings
Section 4 Structures
Section 5 Heating and ventilation
Section 6 Fire prevention
Appendix I Minimum Horizontal Net Distance Between Underground Pipelines
Appendix II Minimum Net Vertical Distance for Crossing of Underground Pipelines and for Crossing Pipeline with Road
Appendix III Limit of Deflection and Cracking
Appendix IV Evenly Distributed Live Load of Buildings and Relevant Factors
Appendix V Maximum Distance of Anti Seismic Transverse Brick Walls
Appendix VI Limit of Local Size of Multi-story Brick Bearing Buildings
Type
Appendix VII Calculated Length of Pressed Rod Inside and Outside the Plane of Λ-shape Column
Appendix VIII Calculated Length of Pressed Rod
Appendix IX Minimum Fire Resistance Class for Buildings and Structures of Substation
Appendix X Minimum Fire prevention Net Distance for Buildings, Structures and Equipment
