GB 5009.253-2026 National food safety standard - Determination of perfluoroalkyl and polyfluoroalkyl substances in foods
1 Scope
This standard specifies the isotope internal standard-liquid chromatography-tandem mass spectrometry method for the determination of perfluoroalkyl and polyfluoroalkyl substances in foods.
This standard is applicable to the determination of perfluorobutanoic acid, perfluoropentanoic acid, perfluorohexanoic acid, perfluoroheptanoic acid, perfluorooctanoic acid, perfluorononanoic acid, perfluorodecanoic acid, perfluoroundecanoic acid, perfluorododecanoic acid, perfluorotridecanoic acid, perfluorotetradecanoic acid, perfluorobutane sulfonic acid, perfluoropentane sulfonic acid, perfluorohexane sulfonic acid, perfluoroheptane sulfonic acid, perfluorooctane sulfonic acid, perfluorononane sulfonic acid, perfluorodecane sulfonic acid, perfluoro-4-methylheptanoic acid, perfluoro-5-methylheptanoic acid, perfluoro-6-methylheptanoic acid, perfluoro-1-methylheptane sulfonic acid, perfluoro-3-methylheptane sulfonic acid, perfluoro-4-methylheptane sulfonic acid, perfluoro-5-methylheptane sulfonic acid, perfluoro-6-methylheptane sulfonic acid, 9-chlorohexadecafluoro-3-oxanonane-1-sulfonic acid, 11-chloroeicosafluoro-3-oxaundecane-1-sulfonic acid, dodecafluoro-3H-4,8-dioxanonanoic acid and perfluoro-2-methyl-3-oxahexanoic acid in foods.
2 Principle
An isotope internal standard is added to the test sample; the sample is extracted with alkaline methanol solution (acetonitrile is used for liquid milk test samples), enriched and cleaned up on a solid-phase extraction column, determined by liquid chromatography-tandem mass spectrometry, and quantified by the isotope internal standard method.
3 Reagents and materials
Unless otherwise specified, all reagents used in this method shall be of analytical grade, and the water shall be Grade 1 water specified in GB/T 6682.
3.1 Reagents
3.1.1 Methanol (CH3OH): chromatographic grade.
3.1.2 Acetonitrile (CH3CN): chromatographic grade.
3.1.3 Formic acid (HCOOH): chromatographic grade.
3.1.4 Sodium hydroxide (NaOH).
3.1.5 Ammonia solution (NH₃·H₂O): 28% to 30%.
3.2 Preparation of reagents
3.2.1 Sodium hydroxide-methanol solution (50 mmol/L): weigh 1 g (accurate to 0.001 g) of sodium hydroxide, dissolve it in methanol and dilute to 500 mL.
3.2.2 2% formic acid solution: pipette 2 mL of formic acid and dilute to 100 mL with water.
3.2.3 Methanol/water solution (50+50): mix methanol and water uniformly at a volume ratio of 50:50.
3.2.4 2% formic acid-methanol/water solution: pipette 2 mL of formic acid and dilute to 100 mL with methanol/water solution (50+50).
3.2.5 9% ammonia-methanol solution: pipette 9 mL of ammonia solution and dilute to 100 mL with methanol.
3.2.6 Ammonium formate solution (pH4): pipette 165 μL of formic acid, dilute to 500 mL with water, and adjust the pH to 4 with ammonia solution.
3.3 Reference standards
3.3.1 Mixed standard solution of 18 perfluoroalkyl substances: see Annex A for details; reference standards with a purity of ≥99% or their solutions.
3.3.2 9-Chlorohexadecafluoro-3-oxanonane-1-sulfonic acid (C₈HF₁₆ClSO₄, 6:2 Cl-PFESA): reference standard with a purity of ≥99% or its solution.
3.3.3 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (C₁₀HF₂₀ClSO₄, 8:2 Cl-PFESA): reference standard with a purity of ≥99% or its solution.
3.3.4 Dodecafluoro-3H-4,8-dioxanonanoic acid (C₇H₂F₁₂O₄, ADONA): reference standard with a purity of ≥99% or its solution.
3.3.5 Perfluoro-2-methyl-3-oxahexanoic acid (C₆HF₁₁O₃, HFPO-DA): reference standard with a purity of ≥99% or its solution.
3.3.6 Perfluoro-1-methylheptane sulfonic acid standard solution (C₈HF₁₇SO₃, 1m-PFOS): reference standard with a purity of ≥99% or its solution.
3.3.7 Perfluoro-3-methylheptane sulfonic acid standard solution (C₈HF₁₇SO₃, 3m-PFOS): reference standard with a purity of ≥99% or its solution.
3.3.8 Perfluoro-4-methylheptane sulfonic acid standard solution (C₈HF₁₇SO₃, 4m-PFOS): reference standard with a purity of ≥99% or its solution.
3.3.9 Perfluoro-4-methylheptanoic acid standard solution (C₈HF₁₅O₂, 4m-PFOA): reference standard with a purity of ≥99% or its solution.
Contents
Foreword II
1 Scope
2 Principle
3 Reagents and materials
4 Apparatus
5 Analysis steps
6 Expression of analytical results
7 Accuracy
8 Others
Annex A Reference standard information, mass spectrometric acquisition parameters and standard curve series of perfluoroalkyl and polyfluoroalkyl substances
Annex B Ion channel chromatograms of 30 perfluoroalkyl and polyfluoroalkyl substances (the third concentration level of the standard series) and isotope internal standard compounds
Standard
GB 5009.253-2026 National food safety standard - Determination of perfluoroalkyl and polyfluoroalkyl substances in food (English)
Standard No.
GB 5009.253-2026
Status
to be valid
Language
English
File Format
PDF
Word Count
10500 words
Translation Price(USD)
315.0
Implemented on
2027-2-18
Delivery
via email in 1 business day
Detail of GB 5009.253-2026
Standard No.
GB 5009.253-2026
English Name
National food safety standard - Determination of perfluoroalkyl and polyfluoroalkyl substances in food
Chinese Name
食品安全国家标准 食品中全氟和多氟烷基化合物的测定
Chinese Classification
Professional Classification
GB
ICS Classification
Issued by
National Health Commission and State Administration for Market Regulation
GB 5009.253-2026 National food safety standard - Determination of perfluoroalkyl and polyfluoroalkyl substances in foods
1 Scope
This standard specifies the isotope internal standard-liquid chromatography-tandem mass spectrometry method for the determination of perfluoroalkyl and polyfluoroalkyl substances in foods.
This standard is applicable to the determination of perfluorobutanoic acid, perfluoropentanoic acid, perfluorohexanoic acid, perfluoroheptanoic acid, perfluorooctanoic acid, perfluorononanoic acid, perfluorodecanoic acid, perfluoroundecanoic acid, perfluorododecanoic acid, perfluorotridecanoic acid, perfluorotetradecanoic acid, perfluorobutane sulfonic acid, perfluoropentane sulfonic acid, perfluorohexane sulfonic acid, perfluoroheptane sulfonic acid, perfluorooctane sulfonic acid, perfluorononane sulfonic acid, perfluorodecane sulfonic acid, perfluoro-4-methylheptanoic acid, perfluoro-5-methylheptanoic acid, perfluoro-6-methylheptanoic acid, perfluoro-1-methylheptane sulfonic acid, perfluoro-3-methylheptane sulfonic acid, perfluoro-4-methylheptane sulfonic acid, perfluoro-5-methylheptane sulfonic acid, perfluoro-6-methylheptane sulfonic acid, 9-chlorohexadecafluoro-3-oxanonane-1-sulfonic acid, 11-chloroeicosafluoro-3-oxaundecane-1-sulfonic acid, dodecafluoro-3H-4,8-dioxanonanoic acid and perfluoro-2-methyl-3-oxahexanoic acid in foods.
2 Principle
An isotope internal standard is added to the test sample; the sample is extracted with alkaline methanol solution (acetonitrile is used for liquid milk test samples), enriched and cleaned up on a solid-phase extraction column, determined by liquid chromatography-tandem mass spectrometry, and quantified by the isotope internal standard method.
3 Reagents and materials
Unless otherwise specified, all reagents used in this method shall be of analytical grade, and the water shall be Grade 1 water specified in GB/T 6682.
3.1 Reagents
3.1.1 Methanol (CH3OH): chromatographic grade.
3.1.2 Acetonitrile (CH3CN): chromatographic grade.
3.1.3 Formic acid (HCOOH): chromatographic grade.
3.1.4 Sodium hydroxide (NaOH).
3.1.5 Ammonia solution (NH₃·H₂O): 28% to 30%.
3.2 Preparation of reagents
3.2.1 Sodium hydroxide-methanol solution (50 mmol/L): weigh 1 g (accurate to 0.001 g) of sodium hydroxide, dissolve it in methanol and dilute to 500 mL.
3.2.2 2% formic acid solution: pipette 2 mL of formic acid and dilute to 100 mL with water.
3.2.3 Methanol/water solution (50+50): mix methanol and water uniformly at a volume ratio of 50:50.
3.2.4 2% formic acid-methanol/water solution: pipette 2 mL of formic acid and dilute to 100 mL with methanol/water solution (50+50).
3.2.5 9% ammonia-methanol solution: pipette 9 mL of ammonia solution and dilute to 100 mL with methanol.
3.2.6 Ammonium formate solution (pH4): pipette 165 μL of formic acid, dilute to 500 mL with water, and adjust the pH to 4 with ammonia solution.
3.3 Reference standards
3.3.1 Mixed standard solution of 18 perfluoroalkyl substances: see Annex A for details; reference standards with a purity of ≥99% or their solutions.
3.3.2 9-Chlorohexadecafluoro-3-oxanonane-1-sulfonic acid (C₈HF₁₆ClSO₄, 6:2 Cl-PFESA): reference standard with a purity of ≥99% or its solution.
3.3.3 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid (C₁₀HF₂₀ClSO₄, 8:2 Cl-PFESA): reference standard with a purity of ≥99% or its solution.
3.3.4 Dodecafluoro-3H-4,8-dioxanonanoic acid (C₇H₂F₁₂O₄, ADONA): reference standard with a purity of ≥99% or its solution.
3.3.5 Perfluoro-2-methyl-3-oxahexanoic acid (C₆HF₁₁O₃, HFPO-DA): reference standard with a purity of ≥99% or its solution.
3.3.6 Perfluoro-1-methylheptane sulfonic acid standard solution (C₈HF₁₇SO₃, 1m-PFOS): reference standard with a purity of ≥99% or its solution.
3.3.7 Perfluoro-3-methylheptane sulfonic acid standard solution (C₈HF₁₇SO₃, 3m-PFOS): reference standard with a purity of ≥99% or its solution.
3.3.8 Perfluoro-4-methylheptane sulfonic acid standard solution (C₈HF₁₇SO₃, 4m-PFOS): reference standard with a purity of ≥99% or its solution.
3.3.9 Perfluoro-4-methylheptanoic acid standard solution (C₈HF₁₅O₂, 4m-PFOA): reference standard with a purity of ≥99% or its solution.
Contents of GB 5009.253-2026
Contents
Foreword II
1 Scope
2 Principle
3 Reagents and materials
4 Apparatus
5 Analysis steps
6 Expression of analytical results
7 Accuracy
8 Others
Annex A Reference standard information, mass spectrometric acquisition parameters and standard curve series of perfluoroalkyl and polyfluoroalkyl substances
Annex B Ion channel chromatograms of 30 perfluoroalkyl and polyfluoroalkyl substances (the third concentration level of the standard series) and isotope internal standard compounds