Standard No.:	GB 50185-2010
English Name:	Code for Acceptance of Construction Quality of Industrial Equipment and Pipeline Insulation Engineering
Chinese Name:	工业设备及管道绝热施工质量验收规范
Professional Classification:	GB    National Standard
Source Content Issued by:	MOHURD; AQSIQ
Issued on:	2010-05-31
Implemented on:	2010-12-1
Status:	superseded
Superseded by:	GB/T 50185-2019 Code for acceptance of construction quality of industrial equipment and pipeline insulation engineering
Superseded on:	2020-3-1
Superseding:	GB 50185-1993 Standard for Quality Inspection and Assessment of Heat Insulation E
Target Language:	English
File Format:	PDF
Word Count:	11000 words
Translation Price(USD):	160.0
Delivery:	via email in 1 business day

1.0.1 This code was formulated in order to unify the methods of construction quality acceptance of industrial equipment and pipeline insulation engineering, strengthen the technical management and ensure the engineering quality. 1.0.2 This code applies to the acceptance of construction quality of industrial equipment and pipeline engineering with the internal medium temperature greater than or equal to -196℃ but less than or equal to +850℃. 1.0.3 This code shall be used in conjunction with the current national standards "Unified Standard for Constructional Quality Acceptance of Industrial Installation Engineering" GB 50252 and "Code for Construction of Industrial Equipment and Pipeline Insulation Engineering" GB 50126. 1.0.4 This code specifies the basic requirements for the acceptance of construction quality of industrial equipment and pipeline insulation engineering, and it shall be enforced according to the requirements of the national laws and administrative regulations if this code conflicts with the requirements of the national laws and administrative regulations. 1.0.5 The acceptance of construction quality of industrial equipment and pipeline insulation engineering shall not only comply with this code, but also shall meet those specified in the relevant current standards of the state.

1 General Provisions 2 Terms 3 Basic Requirement 3.1 Division of the Construction Quality Acceptance 3.2 Qualified Requirement for Quality Acceptance 3.3 Procedure and Quantity of the Construction Quality Acceptance 4 Material 5 Attachment Installation 6 Construction Quality Acceptance of Heat Insulating Layer 6.1 General Requirement 6.2 Construction Quality 7 Construction Quality Acceptance of Dampproof Course 8 Construction Quality Acceptance of Protective Course 8.1 Metallic Protective Course 8.2 Nonmetallic Protective Course 9 Acceptance of Project Appendix A List of Inspection Lot Quality Acceptance Appendix B List of Sub-item Project's Quality Acceptance Appendix C List of Subsection (Sub-subsection) Project's Quality Acceptance Appendix D List of Unit (Sub-unit) Project's Quality Acceptance Appendix E List of Quality's Guarantee Materials Explanation of Wording in this Code List of Quoted Standards