1 Scope
This standard specifies the specification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of sealed insulating glass unit.
It is applicable to sealed insulating glass units used in building and for refrigeration.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document applies.
GB/T 1216 External micrometer (neq ISO 3611)
GB 9962 Laminated glass
GB/T 9963 Tempered glass
GB 11614 Float glass
GB 17841 Tempered and heat-strengthened glass used in curtain walls
JC/T 486 Elastic sealants for insulating glass
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
sealed insulating glass unit
product formed by two or more panes of glasses that are evenly spaced apart with effective supports and bonded and sealed to each other at the edge, therefore a dry gas space exists between the glass layers
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Specifications
5 Requirements
6 Test methods
7 Inspection rules
8 Packaging, marking, transport and storage
1 Scope
This standard specifies the specification, technical requirements, test methods, inspection rules, packaging, marking, transportation and storage of sealed insulating glass unit.
It is applicable to sealed insulating glass units used in building and for refrigeration.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document applies.
GB/T 1216 External micrometer (neq ISO 3611)
GB 9962 Laminated glass
GB/T 9963 Tempered glass
GB 11614 Float glass
GB 17841 Tempered and heat-strengthened glass used in curtain walls
JC/T 486 Elastic sealants for insulating glass
3 Terms and definitions
For the purpose of this standard, the following terms and definitions apply.
sealed insulating glass unit
product formed by two or more panes of glasses that are evenly spaced apart with effective supports and bonded and sealed to each other at the edge, therefore a dry gas space exists between the glass layers
Contents of GB/T 11944-2002
Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Specifications
5 Requirements
6 Test methods
7 Inspection rules
8 Packaging, marking, transport and storage
