GB/T 14342-2015 Man-made fiber - Test method for specific resistance of staple fibers
1 Scope
This standard specifies the test method for specific resistance of man-made staple fibers.
This standard is applicable to man-made staple fibers.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3291.1 Textiles - Terms of textile material properties and test - Part 1: Fibre and yarn
GB/T 3291.3 Textiles - Terms of textile material properties and test - Part 3: General
GB/T 4146.1 Textiles - Man-made fibres - Part 1: Generic names
GB/T 4146.3 Textiles - Man-made fibers - Part 3: Terms of inspection
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB 9994 Conventional moisture regains of textile materials
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 3291.1, GB/T 3291.3, GB/T 4146.1 and GB/T 4146.3 as well as the following apply.
3.1
specific resistance
volume resistance of fibers in a certain volume, calculated based on fiber density
4 Principle
According to the equation of volume resistance, , the resistance of fibers with a certain density in a certain geometry is measured, and then it is converted into specific resistance according to the packing density of fibers.
5 Instruments and tools
5.1 Fiber specific resistance meter
The requirements for fiber specific resistance meter are as follows:
a) Measurement range of instrument: 102Ω~1014Ω.
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Instruments and tools
6 Standard atmosphere for preconditioning, conditioning and test
7 Specimen and its preparation
8 Test procedure
9 Calculation of results
10 Test report
Annex A (Normative) Test method for specific resistance - Bridge method
GB/T 14342-2015 Man-made fiber - Test method for specific resistance of staple fibers
1 Scope
This standard specifies the test method for specific resistance of man-made staple fibers.
This standard is applicable to man-made staple fibers.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3291.1 Textiles - Terms of textile material properties and test - Part 1: Fibre and yarn
GB/T 3291.3 Textiles - Terms of textile material properties and test - Part 3: General
GB/T 4146.1 Textiles - Man-made fibres - Part 1: Generic names
GB/T 4146.3 Textiles - Man-made fibers - Part 3: Terms of inspection
GB/T 8170 Rules of rounding off for numerical values & expression and judgment of limiting values
GB 9994 Conventional moisture regains of textile materials
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 3291.1, GB/T 3291.3, GB/T 4146.1 and GB/T 4146.3 as well as the following apply.
3.1
specific resistance
volume resistance of fibers in a certain volume, calculated based on fiber density
4 Principle
According to the equation of volume resistance, , the resistance of fibers with a certain density in a certain geometry is measured, and then it is converted into specific resistance according to the packing density of fibers.
5 Instruments and tools
5.1 Fiber specific resistance meter
The requirements for fiber specific resistance meter are as follows:
a) Measurement range of instrument: 102Ω~1014Ω.
Contents of GB/T 14342-2015
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Instruments and tools
6 Standard atmosphere for preconditioning, conditioning and test
7 Specimen and its preparation
8 Test procedure
9 Calculation of results
10 Test report
Annex A (Normative) Test method for specific resistance - Bridge method
