GB/T 15822.3-2024 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
1 Scope
This document describes three types of equipment for magnetic particle testing:
——portable or transportable equipment;
——fixed installations;
——specialized testing systems for testing components on a continuous basis, comprising a series of processing stations placed in sequence to form a process line.
Equipment for magnetizing, demagnetizing, illumination, measurement, and monitoring are also described.
This document specifies the properties to be provided by the equipment supplier, minimum requirements for application and the method of measuring certain parameters. Where appropriate, measuring and calibration requirements and in-service checks are also specified.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3059 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
ISO 9934-1 Non-destructive testing - Magnetic particle testing - Part 1: General rules
IEC 60529 Degrees of protection provided by enclosures (IP Code)
EN 10250-2 Open steel die forgings for general engineering purposes - Non-alloy quality and special steels
3 Terms and definitions
There are no terms or definitions that need to be defined in this document.
4 Safety requirements
The equipment design shall take into account all regulations which include health, safety, electrical and environmental requirements.
GB/T 15822.3-2024 Non-destructive testing - Magnetic particle testing - Part 3: Equipment
1 Scope
This document describes three types of equipment for magnetic particle testing:
——portable or transportable equipment;
——fixed installations;
——specialized testing systems for testing components on a continuous basis, comprising a series of processing stations placed in sequence to form a process line.
Equipment for magnetizing, demagnetizing, illumination, measurement, and monitoring are also described.
This document specifies the properties to be provided by the equipment supplier, minimum requirements for application and the method of measuring certain parameters. Where appropriate, measuring and calibration requirements and in-service checks are also specified.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 3059 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
ISO 9934-1 Non-destructive testing - Magnetic particle testing - Part 1: General rules
IEC 60529 Degrees of protection provided by enclosures (IP Code)
EN 10250-2 Open steel die forgings for general engineering purposes - Non-alloy quality and special steels
3 Terms and definitions
There are no terms or definitions that need to be defined in this document.
4 Safety requirements
The equipment design shall take into account all regulations which include health, safety, electrical and environmental requirements.
