Standard No.:	GB/T 16277-2008
English Name:	Asphalt paver
Chinese Name:	沥青混凝土摊铺机
Chinese Classification:	P97    Architectural engineering construction machinery
Professional Classification:	GB    National Standard
Source Content Issued by:	AQSIQ; SAC
Issued on:	2008-2-3
Implemented on:	2008-7-1
Status:	superseded
Superseded by:	GB/T 16277-2021
Superseded on:	2022-5-1
Superseding:	GB/T 16277-1996 Asphalt paver
Target Language:	English
File Format:	PDF
Word Count:	18000 words
Translation Price(USD):	240.0
Delivery:	via email in 1 business day

1 Scope This standard specifies the classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of asphalt paver. This standard is applicable to self-propelled asphalt paver (hereinafter referred to as "paver"). 2 Normative References The following normative document contains provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent edition of the normative document indicated below. For undated references, the latest edition of the normative document referred to applies. GB/T 3766 Hydraulic Fluid Power — General Rules Relating to Systems (GB/T 3766-2001, eqv ISO 4413:1998) GB/T 4798.5-1987 Environmental Conditions Existing in the Application of Electric and Electronic Products — Ground Vehicle Installations (neq IEC 721-3-5:1985) GB 5226.1 Safety of Machinery — Electrical Equipment of Machines — Part 1: General Requirements (GB/T 5226.1-2002, IEC 60204-1:2000, IDT) GB 5959.1 Safety in Electroheat Installations — Part 1: General Requirements (GB 5959.1-2005, IEC 60519-1:2003, IDT) GB 7258 Safety Specifications for Motor Vehicles Operating on Roads GB/T 7920.12 Asphalt Paver — Terminology GB/T 7932 Pneumatic Fluid Power — General Rules Relating to Systems (GB/T 7932-2003, ISO 4414:1998, IDT) GB/T 8190.4 Reciprocating Intenal Combustion Engines — Exhaust Emission Measurement Part 4: Steady-state Test Cycles for Different Engine Applications (GB/T 8190.4-1999, idt ISO 8178-4:1996) GB/T 8592-2001 Earth-moving Machinery — Determination of Turning Dimensions of Wheeled Machines (eqv ISO 7457:1997) GB/T 8593.1-1998 Earth-moving Machinery — Symbols for Operator Controls and Other Display — Part 1: Common Symbols (eqv ISO 6405-1:1991) GB 9969.1 General Principles for Preparation of Instructions for Use of Industrial Products GB/T 10913-2005 Earth-moving Machinery — Determination of Ground Speed (ISO6014:1986, MOD) GB/T 13306 Plates GB 16710.1 Earth-moving Machinery — Noise Limits GB/T 17299 Earth-moving Machinery — Minimum Access Dimensions (GB/T 17299-1998, idt ISO 2860:1992) GB/T 17300 Earth-moving Machinery — Access Systems (GB/T 17300-1998, idt ISO 2867:1994) GB/T 19929 Earth-moving Machinery — Crawler Machines — Performance Requirements and Test Procedures for Braking Systems (GB/T 19929-2005, ISO 10265:1998, MOD) GB 50092 Specifications for Construction and Acceptance of Asphalt Pavements JB/T 3683 Earth-moving Machinery — Zones of Comfort and Reach for Controls (JB/T 3683-2001, eqv ISO 6682:1986) JB/T 3690-1999 Earth-moving Machinery — Methods of Measuring the Masses of Whole Machines with their Equipment and Components (idt ISO 6016:1982) JB/T 3873-1999 Earth-moving Machinery — Method for Locating the Center of Gravity (idt ISO 5005:1977) JB/T 7690 Earth-moving Machinery — Units for Dimensions Performance and Capacities and Their Measurement Accuracies (JB/T 7690-1995, eqv ISO 9248:1992)

Foreword II 1 Scope 2 Normative References 3 Terms and Definitions 4 Classification 5 Technical Requirements 6 Test Method 7 Inspection Rules 8 Marking, Packaging, Transportation and Storage Annex A (Informative) Test Data Report of Paver Annex B (Informative) Measuring Method of Planeness (3m Straight Ruler) Annex C (Informative) Density Test of Asphalt Concrete Pavement