1 Scope
This standard specifies the general procedure of failure analysis for fiber reinforced plastics structural products.
This standard is applicable to the failure analysis for fiber reinforced plastic structural products.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 2576 Test Method for Insoluble Matter Content of Resin Used in Fiber Reinforced Plastics
GB/T 2577 Test Method for Resin Content of Glass Fiber Reinforced Plastics
GB/T 3365 Carbon Fiber Reinforced Plastics - Determination of Void Content and Fiber Volume Content
GB/T 3854 Test Method for Hardness of Reinforced Plastics by Means of a Barcol Impresser
GB/T 3855 Test Method for Resin Content of Carbon Fiber Reinforced Plastics
GB/T 6041 General Rules for Mass Spectrometric Analysis
GJB 1038.1 Non-destructive Inspecting Methods for Fiber Reinforced Plastics - Ultrasonic Inspecting
GJB 1038.2 Non-destructive Inspecting Methods for Fiber Reinforced Plastics - X-ray Inspecting Method
HB 5416 Inspection Method for Infrared Spectrum of Aviation Non-metal Material
JC/T 287 Test Method for Void Content of Fibre Reinforced Plastics
3 General Procedure of Failure Analysis
Foreword i
1 Scope
2 Normative References
3 General Procedure of Failure Analysis
4 Failure Analytical Approach
1 Scope
This standard specifies the general procedure of failure analysis for fiber reinforced plastics structural products.
This standard is applicable to the failure analysis for fiber reinforced plastic structural products.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 2576 Test Method for Insoluble Matter Content of Resin Used in Fiber Reinforced Plastics
GB/T 2577 Test Method for Resin Content of Glass Fiber Reinforced Plastics
GB/T 3365 Carbon Fiber Reinforced Plastics - Determination of Void Content and Fiber Volume Content
GB/T 3854 Test Method for Hardness of Reinforced Plastics by Means of a Barcol Impresser
GB/T 3855 Test Method for Resin Content of Carbon Fiber Reinforced Plastics
GB/T 6041 General Rules for Mass Spectrometric Analysis
GJB 1038.1 Non-destructive Inspecting Methods for Fiber Reinforced Plastics - Ultrasonic Inspecting
GJB 1038.2 Non-destructive Inspecting Methods for Fiber Reinforced Plastics - X-ray Inspecting Method
HB 5416 Inspection Method for Infrared Spectrum of Aviation Non-metal Material
JC/T 287 Test Method for Void Content of Fibre Reinforced Plastics
3 General Procedure of Failure Analysis
Contents of GB/T 16778-2009
Foreword i
1 Scope
2 Normative References
3 General Procedure of Failure Analysis
4 Failure Analytical Approach
