1 Scope
This Standard establishes a consistent and reproducible means of evaluating the load-carrying characteristics of Roll-Over Protective Structures (ROPS) under static loading, and prescribes performance requirements for a representative specimen under such loading.
This Standard applies to the following seated design operator controlled machines as defined in GB/T 8498:
— Crawler tractors and loaders;
— Graders;
— Wheeled loaders and wheeled tractors and their modified versions used for rolling or compacting, dozer-equipped wheeled tractors, skid-steer loaders and backhoe loaders;
— Wheeled industrial tractors;
— The tractor portion (prime mover), of tractor scrapers, water wagons, articulated steer dumpers, bottom-dump wagons, side-dump wagons, rear-dump wagons and towed fifth-wheel attachments;
— Rollers and compactors;
— Rigid frame dumpers.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
1 Scope
This Standard establishes a consistent and reproducible means of evaluating the load-carrying characteristics of Roll-Over Protective Structures (ROPS) under static loading, and prescribes performance requirements for a representative specimen under such loading.
This Standard applies to the following seated design operator controlled machines as defined in GB/T 8498:
— Crawler tractors and loaders;
— Graders;
— Wheeled loaders and wheeled tractors and their modified versions used for rolling or compacting, dozer-equipped wheeled tractors, skid-steer loaders and backhoe loaders;
— Wheeled industrial tractors;
— The tractor portion (prime mover), of tractor scrapers, water wagons, articulated steer dumpers, bottom-dump wagons, side-dump wagons, rear-dump wagons and towed fifth-wheel attachments;
— Rollers and compactors;
— Rigid frame dumpers.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
