GB/T 19190-2025 Petroleum and natural gas industries - Drilling and production hoisting equipment English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
ICS 13.220
CCS H 57
National Standard of the People's Republic of China
GB/T 19190-2025
Replaces GB/T 19190-2013
Petroleum and natural gas industries - Drilling and production hoisting equipment
石油天然气工业 钻井和采油提升设备
Issue date: 2025-10-31 Implementation date: 2026-05-01
Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
the Standardization Administration of the People's Republic of China
Contents
Foreword
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
3.2 Abbreviations
4 Classification Designations and Designation Methods
5 Technical Requirements
5.1 General Requirements
5.2 Basic Parameters
5.3 Structural Dimensions
6 Design
6.1 General Requirements
6.2 Design Conditions
6.3 Strength Analysis
6.4 Specification Grades
6.5 Rated Loads
7 Quality Control
7.1 General Requirements
7.2 Personnel Qualification
8 Testing and Inspection
8.1 Design Verification Testing
8.2 Proof Load Testing
8.3 Hydrostatic Testing
8.4 Functional Testing
8.5 Inspection Rules
9 Marking
10 Documentation
11 Packaging, Transportation and Storage
Appendix A (Normative) Additional Requirements
Appendix B (Informative) Evaluation of Heat Treatment Equipment
References
1 Scope
This document specifies the classification, designations, technical requirements, design, quality control, inspection and testing, marking, documentation, packaging, transportation, and storage for drilling and production hoisting equipment (hereinafter referred to as "hoisting equipment").
This document applies to the design, manufacture, testing, and inspection of the following hoisting equipment:
a) Sheaves;
b) Traveling blocks and swivel hooks;
c) Connectors;
d) Drilling hooks;
e) Tubing hooks and sucker rod hooks;
f) Lifting eyes;
g) Casing elevators, tubing elevators, drill pipe elevators, and drill collar elevators;
h) Sucker rod elevators;
i) Rotary swivel joints;
j) Power swivel joints;
k) Power subs;
l) slips used as elevators;
m) Deadline anchor devices;
n) Drill string motion compensators;
o) Kelly bushing wrenches used as hoisting equipment;
p) Riser handling tool assemblies used as hoisting equipment;
q) Wellhead handling tool assemblies used as hoisting equipment;
r) Safety slips used as hoisting equipment;
s) Guide cars for traveling equipment.
Note: This document specifies requirements for two different product specification levels (PSL 1 and PSL 2). Unless otherwise specified as PSL 2, all requirements in Chapters 4 to 9 apply to PSL 1. PSL 2 includes all requirements of PSL 1 plus additional practices specified in this document.
2 Normative References
The contents of the following documents, through normative citations in this document, constitute essential provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 228.1 Metallic materials — Tensile testing — Part 1: Method of test at room temperature
GB/T 229 Metallic materials — Charpy pendulum impact test
GB/T 5313 Thickness direction steel plates
GB/T 5677 Castings — Radiographic examination
GB/T 6402 Ultrasonic testing method for steel forgings
GB/T 7233.2 Steel castings — Ultrasonic testing — Part 2: High-pressure steel castings
GB/T 19190—2025
GB/T 9253 Petroleum and natural gas industries — Gauging, measuring, and inspecting casing, tubing, and line pipe threads
GB/T 9443 Steel and iron castings — Penetrant testing
GB/T 9444 Steel and iron castings — Magnetic particle testing
GB/T 9445 Non-destructive testing — Qualification and certification of personnel
GB/T 11259 Non-destructive testing — Preparation and control of reference steel blocks for ultrasonic testing
GB/T 15169 Qualification testing of welders for fusion welding of steels
GB/T 17744 Petroleum and natural gas industries — Drilling and workover equipment
GB/T 19830 Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
GB/T 19190 Petroleum and natural gas industries — Inspection, maintenance, repair, and remanufacturing of drilling and production hoisting equipment
GB/T 19869.1 Qualification testing of welding procedures for welding of steels, nickel, and nickel alloys
GB/T 22512.1 Petroleum and natural gas industries — Rotating drilling equipment — Part 1: Rotating drill string components
GB/T 22512.2 Petroleum and natural gas industries — Rotating drilling equipment — Part 2: Fabrication and measurement of rotating shoulder connections
GB/T 37400.7 General technical requirements for heavy machinery — Part 7: Repair welding of steel castings
GB/T 39428 Sand mold steel castings — Visual inspection method for surface quality
GB 50661 Code for welding of steel structures
JJG 139 Verification regulation of tension, compression, and universal testing machines
NB/T 47013.2 Non-destructive testing of pressure equipment — Part 2: Radiographic testing
NB/T 47013.3 Non-destructive testing of pressure equipment — Part 3: Ultrasonic testing
NB/T 47013.4 Non-destructive testing of pressure equipment — Part 4: Magnetic particle testing
NB/T 47013.5 Non-destructive testing of pressure equipment — Part 5: Penetrant testing
NB/T 47013.7 Non-destructive testing of pressure equipment — Part 7: Visual testing
NB/T 47014 Welding procedure qualification for pressure equipment
SY/T 5049 Drilling and workover slips
SY/T 5530 Swivel joints for drilling and workover rigs
SY/T 6113 Power chucks for workover operations
SY/T 6276 Health, safety, and environmental management systems for petroleum and natural gas industries
SY/T 6666 Recommended practice for selection and maintenance of wire ropes for petroleum and natural gas industries
SY/T 6680 Acceptance specification for drilling and workover rigs
SY/T 6919 Coating specification for drilling and workover rigs
SY/T 7332 Drilling and workover elevators
SY/T 7460 Drill string motion compensators for floating drilling platforms
ISO 4993 Steel and iron castings — Radiographic testing
3 Terms, Definitions, and Abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
3.1.1 Bearing dynamic load rating
The calculated maximum dynamic load that a bearing supporting the principal load can withstand.
3.1.2 Design load
The sum of static and dynamic loads applied to a component to reach its maximum allowable stress.
3.1.3 Design safety factor
The factor considering a safety margin between the maximum allowable stress of the material and its specified minimum yield strength.
3.1.4 Design verification test
A test conducted to verify the integrity of design calculations.
3.1.5 Dynamic load
The load applied to equipment due to acceleration effects.
3.1.6 Equivalent round
A representation of various cross-sectional shapes as equivalent round sections for determining hardness characteristics of heat-treated low-alloy or martensitic stainless steel.
3.1.7 Load rating
The maximum load specified for application to the equipment.
Note: The load rating includes static and dynamic loads and numerically equals the design load.
3.1.8 Maximum allowable stress
The specified minimum yield strength divided by the design safety factor.
3.1.9 Principal load
The load in the hoisting direction experienced by the equipment during operation.
3.1.10 Primary load-carrying component
The component of the equipment that carries the principal load.
3.1.11 Product specification level (PSL)
The level of control applied to materials and processes for primary load-carrying components in the equipment.
Note: Two product specification levels are designated as PSL 1 or PSL 2.
3.1.12 Proof load test
A product load test conducted to determine the load rating of the equipment.
3.1.13 Repair welding
The process of removing defects from parts or components during new equipment manufacturing and restoring them using welding.
Note: In this document, the term "repair welding" refers only to the repair of material defects during equipment manufacturing.
3.1.14 Test unit
The prototype product undergoing design verification testing.
3.2 Abbreviations
The following abbreviations apply to this document.
DAC: Distance Amplitude Curve
Standard
GB/T 19190-2025 Petroleum and natural gas industries - Drilling and production hoisting equipment (English Version)
Standard No.
GB/T 19190-2025
Status
to be valid
Language
English
File Format
PDF
Word Count
27500 words
Price(USD)
825.0
Implemented on
2026-5-1
Delivery
via email in 1~8 business day
Detail of GB/T 19190-2025
Standard No.
GB/T 19190-2025
English Name
Petroleum and natural gas industries - Drilling and production hoisting equipment
GB/T 19190-2025 Petroleum and natural gas industries - Drilling and production hoisting equipment English, Anglais, Englisch, Inglés, えいご
This is a draft translation for reference among interesting stakeholders. The finalized translation (passing through draft translation, self-check, revision and verification) will be delivered upon being ordered.
ICS 13.220
CCS H 57
National Standard of the People's Republic of China
GB/T 19190-2025
Replaces GB/T 19190-2013
Petroleum and natural gas industries - Drilling and production hoisting equipment
石油天然气工业 钻井和采油提升设备
Issue date: 2025-10-31 Implementation date: 2026-05-01
Issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
the Standardization Administration of the People's Republic of China
Contents
Foreword
1 Scope
2 Normative References
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
3.2 Abbreviations
4 Classification Designations and Designation Methods
5 Technical Requirements
5.1 General Requirements
5.2 Basic Parameters
5.3 Structural Dimensions
6 Design
6.1 General Requirements
6.2 Design Conditions
6.3 Strength Analysis
6.4 Specification Grades
6.5 Rated Loads
7 Quality Control
7.1 General Requirements
7.2 Personnel Qualification
8 Testing and Inspection
8.1 Design Verification Testing
8.2 Proof Load Testing
8.3 Hydrostatic Testing
8.4 Functional Testing
8.5 Inspection Rules
9 Marking
10 Documentation
11 Packaging, Transportation and Storage
Appendix A (Normative) Additional Requirements
Appendix B (Informative) Evaluation of Heat Treatment Equipment
References
1 Scope
This document specifies the classification, designations, technical requirements, design, quality control, inspection and testing, marking, documentation, packaging, transportation, and storage for drilling and production hoisting equipment (hereinafter referred to as "hoisting equipment").
This document applies to the design, manufacture, testing, and inspection of the following hoisting equipment:
a) Sheaves;
b) Traveling blocks and swivel hooks;
c) Connectors;
d) Drilling hooks;
e) Tubing hooks and sucker rod hooks;
f) Lifting eyes;
g) Casing elevators, tubing elevators, drill pipe elevators, and drill collar elevators;
h) Sucker rod elevators;
i) Rotary swivel joints;
j) Power swivel joints;
k) Power subs;
l) slips used as elevators;
m) Deadline anchor devices;
n) Drill string motion compensators;
o) Kelly bushing wrenches used as hoisting equipment;
p) Riser handling tool assemblies used as hoisting equipment;
q) Wellhead handling tool assemblies used as hoisting equipment;
r) Safety slips used as hoisting equipment;
s) Guide cars for traveling equipment.
Note: This document specifies requirements for two different product specification levels (PSL 1 and PSL 2). Unless otherwise specified as PSL 2, all requirements in Chapters 4 to 9 apply to PSL 1. PSL 2 includes all requirements of PSL 1 plus additional practices specified in this document.
2 Normative References
The contents of the following documents, through normative citations in this document, constitute essential provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 228.1 Metallic materials — Tensile testing — Part 1: Method of test at room temperature
GB/T 229 Metallic materials — Charpy pendulum impact test
GB/T 5313 Thickness direction steel plates
GB/T 5677 Castings — Radiographic examination
GB/T 6402 Ultrasonic testing method for steel forgings
GB/T 7233.2 Steel castings — Ultrasonic testing — Part 2: High-pressure steel castings
GB/T 19190—2025
GB/T 9253 Petroleum and natural gas industries — Gauging, measuring, and inspecting casing, tubing, and line pipe threads
GB/T 9443 Steel and iron castings — Penetrant testing
GB/T 9444 Steel and iron castings — Magnetic particle testing
GB/T 9445 Non-destructive testing — Qualification and certification of personnel
GB/T 11259 Non-destructive testing — Preparation and control of reference steel blocks for ultrasonic testing
GB/T 15169 Qualification testing of welders for fusion welding of steels
GB/T 17744 Petroleum and natural gas industries — Drilling and workover equipment
GB/T 19830 Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
GB/T 19190 Petroleum and natural gas industries — Inspection, maintenance, repair, and remanufacturing of drilling and production hoisting equipment
GB/T 19869.1 Qualification testing of welding procedures for welding of steels, nickel, and nickel alloys
GB/T 22512.1 Petroleum and natural gas industries — Rotating drilling equipment — Part 1: Rotating drill string components
GB/T 22512.2 Petroleum and natural gas industries — Rotating drilling equipment — Part 2: Fabrication and measurement of rotating shoulder connections
GB/T 37400.7 General technical requirements for heavy machinery — Part 7: Repair welding of steel castings
GB/T 39428 Sand mold steel castings — Visual inspection method for surface quality
GB 50661 Code for welding of steel structures
JJG 139 Verification regulation of tension, compression, and universal testing machines
NB/T 47013.2 Non-destructive testing of pressure equipment — Part 2: Radiographic testing
NB/T 47013.3 Non-destructive testing of pressure equipment — Part 3: Ultrasonic testing
NB/T 47013.4 Non-destructive testing of pressure equipment — Part 4: Magnetic particle testing
NB/T 47013.5 Non-destructive testing of pressure equipment — Part 5: Penetrant testing
NB/T 47013.7 Non-destructive testing of pressure equipment — Part 7: Visual testing
NB/T 47014 Welding procedure qualification for pressure equipment
SY/T 5049 Drilling and workover slips
SY/T 5530 Swivel joints for drilling and workover rigs
SY/T 6113 Power chucks for workover operations
SY/T 6276 Health, safety, and environmental management systems for petroleum and natural gas industries
SY/T 6666 Recommended practice for selection and maintenance of wire ropes for petroleum and natural gas industries
SY/T 6680 Acceptance specification for drilling and workover rigs
SY/T 6919 Coating specification for drilling and workover rigs
SY/T 7332 Drilling and workover elevators
SY/T 7460 Drill string motion compensators for floating drilling platforms
ISO 4993 Steel and iron castings — Radiographic testing
3 Terms, Definitions, and Abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
3.1.1 Bearing dynamic load rating
The calculated maximum dynamic load that a bearing supporting the principal load can withstand.
3.1.2 Design load
The sum of static and dynamic loads applied to a component to reach its maximum allowable stress.
3.1.3 Design safety factor
The factor considering a safety margin between the maximum allowable stress of the material and its specified minimum yield strength.
3.1.4 Design verification test
A test conducted to verify the integrity of design calculations.
3.1.5 Dynamic load
The load applied to equipment due to acceleration effects.
3.1.6 Equivalent round
A representation of various cross-sectional shapes as equivalent round sections for determining hardness characteristics of heat-treated low-alloy or martensitic stainless steel.
3.1.7 Load rating
The maximum load specified for application to the equipment.
Note: The load rating includes static and dynamic loads and numerically equals the design load.
3.1.8 Maximum allowable stress
The specified minimum yield strength divided by the design safety factor.
3.1.9 Principal load
The load in the hoisting direction experienced by the equipment during operation.
3.1.10 Primary load-carrying component
The component of the equipment that carries the principal load.
3.1.11 Product specification level (PSL)
The level of control applied to materials and processes for primary load-carrying components in the equipment.
Note: Two product specification levels are designated as PSL 1 or PSL 2.
3.1.12 Proof load test
A product load test conducted to determine the load rating of the equipment.
3.1.13 Repair welding
The process of removing defects from parts or components during new equipment manufacturing and restoring them using welding.
Note: In this document, the term "repair welding" refers only to the repair of material defects during equipment manufacturing.
3.1.14 Test unit
The prototype product undergoing design verification testing.
3.2 Abbreviations
The following abbreviations apply to this document.
DAC: Distance Amplitude Curve
