1 Scope
This standard specifies the terminologies and definitions, types and basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation and storage of high precision sectional warping machine.
This standard is applicable to the high precision sectional warping machine of which polyamide filament, polyester filament yarn, viscose yarn, cotton yarn and blended yarn, etc. wind on sectional warping shaft fully.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB 5226.1 Electrical Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements
GB/T 7111.1 2002 Textile Machinery - Noise Test Code - Part 1: Common Requirements
GB/T 7111.5 2002 Textile Machinery - Noise Test Code - Part 5: Weaving and Knitting Preparatory Machinery
FZ/T 90001 Product Package of Textile Machinery
FZ/T 90074-2004 Painting for the Products of Textile Machinery
FZ/T 90084 Terms and Main Dimensions of Warper Beam in Segment for Warp Loom
FZ/T 96002-1991 Special Textile Porcelain Pieces
3 Terminologies and Definitions
For the purposes of this standard, the following terminologies and definitions apply.
3.1
High precision sectional warping machine
The sectional warping machine with copy function and tension roller servo control function of beams in same group and capable of exactly controlling the turns, outer circumference, meters difference and tension fluctuation of beams in same group.
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Types and Basic Parameters
5 Requirements
6 Test Methods
7 Un-load Running Test
8 Operating Load Test
9 Inspection Rules
10 Marking, Packaging, Transportation and Storage
1 Scope
This standard specifies the terminologies and definitions, types and basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation and storage of high precision sectional warping machine.
This standard is applicable to the high precision sectional warping machine of which polyamide filament, polyester filament yarn, viscose yarn, cotton yarn and blended yarn, etc. wind on sectional warping shaft fully.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to (excluding any corrigendum), or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For any undated references, the latest edition of the document referred to applies.
GB/T 191 Packaging - Pictorial Marking for Handling of Goods
GB 5226.1 Electrical Safety of Machinery - Electrical Equipment of Machines - Part 1: General Requirements
GB/T 7111.1 2002 Textile Machinery - Noise Test Code - Part 1: Common Requirements
GB/T 7111.5 2002 Textile Machinery - Noise Test Code - Part 5: Weaving and Knitting Preparatory Machinery
FZ/T 90001 Product Package of Textile Machinery
FZ/T 90074-2004 Painting for the Products of Textile Machinery
FZ/T 90084 Terms and Main Dimensions of Warper Beam in Segment for Warp Loom
FZ/T 96002-1991 Special Textile Porcelain Pieces
3 Terminologies and Definitions
For the purposes of this standard, the following terminologies and definitions apply.
3.1
High precision sectional warping machine
The sectional warping machine with copy function and tension roller servo control function of beams in same group and capable of exactly controlling the turns, outer circumference, meters difference and tension fluctuation of beams in same group.
Contents of GB/T 22296-2008
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Types and Basic Parameters
5 Requirements
6 Test Methods
7 Un-load Running Test
8 Operating Load Test
9 Inspection Rules
10 Marking, Packaging, Transportation and Storage
