1 Scope
This standard specifies the technical requirements, inspection rules as well as marking, packaging, transportation and storage of non-water-repellent and water-repellent cleaning fluids for automotive windshield.
This standard is applicable to the production and inspection of cleaning fluids for automotive windshield.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties who enter into agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest edition applies to this standard.
GB/T 699 Quality Carbon Structural Steels
GB/T 2520 Cold-reduced Electrolytic Tinplate (GB/T 2520-2000, eqv ISO 11949: 1995)
GB/T 3190 Wrought Aluminium and Aluminium Alloy - Chemical Composition (GB/T 3190-1996, neq ISO 209: 1991)
GB/T 4756 Method for Manual Sampling of Petroleum Liquids (GB/T 4756-1998, eqv ISO 3170: 1988)
GB/T 5231 Wrought Copper and Copper Alloys Chemical Composition Limits and Forms of Wrought Products
GB/T 6739 Paints and Varnishes - Determination of Film Hardness by Pencil Test (GB/T 6739-2006, ISO 15184: 1998, IDT)
GB 9656 Safety Glasses for Road Vehicles (GB 9656-2003, ECE R43: 2000, NEQ)
JB/T 8230.3 Microscope Slide
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Technical Requirements and Test Methods
5 Inspection Rules
6 Marking, Packaging, Transportation and Storage
Appendix A (Normative) Cleaning Fluids Appearance Quality Inspection Method
Appendix B (Normative) Determination of Cleaning Fluid Detergency
Appendix C (Normative) Cleaning Fluids Compatibility Inspection Method
Appendix D (Normative) Inspection Method for Cleaning Fluids Corrosiveness to Metal
Appendix E (Normative) Inspection Method for Influence of Cleaning Fluids on Rubber
Appendix F (Normative) Inspection Method for Influence of Cleaning Fluids on Plastic
Appendix G (Normative) Inspection Method for Influence of Cleaning Fluids on Automotive Organic Film
Appendix H (Normative) Inspection Method for Stability of Cleaning Fluids
Appendix I (Normative) Inspection Method for Water Resistance of Water-repellent Cleaning Fluids for Automotive Windshield
1 Scope
This standard specifies the technical requirements, inspection rules as well as marking, packaging, transportation and storage of non-water-repellent and water-repellent cleaning fluids for automotive windshield.
This standard is applicable to the production and inspection of cleaning fluids for automotive windshield.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, the parties who enter into agreement according to this standard are encouraged to study whether the latest editions of these documents apply. For undated references, the latest edition applies to this standard.
GB/T 699 Quality Carbon Structural Steels
GB/T 2520 Cold-reduced Electrolytic Tinplate (GB/T 2520-2000, eqv ISO 11949: 1995)
GB/T 3190 Wrought Aluminium and Aluminium Alloy - Chemical Composition (GB/T 3190-1996, neq ISO 209: 1991)
GB/T 4756 Method for Manual Sampling of Petroleum Liquids (GB/T 4756-1998, eqv ISO 3170: 1988)
GB/T 5231 Wrought Copper and Copper Alloys Chemical Composition Limits and Forms of Wrought Products
GB/T 6739 Paints and Varnishes - Determination of Film Hardness by Pencil Test (GB/T 6739-2006, ISO 15184: 1998, IDT)
GB 9656 Safety Glasses for Road Vehicles (GB 9656-2003, ECE R43: 2000, NEQ)
JB/T 8230.3 Microscope Slide
Contents of GB/T 23436-2009
Foreword i
1 Scope
2 Normative References
3 Terminologies and Definitions
4 Technical Requirements and Test Methods
5 Inspection Rules
6 Marking, Packaging, Transportation and Storage
Appendix A (Normative) Cleaning Fluids Appearance Quality Inspection Method
Appendix B (Normative) Determination of Cleaning Fluid Detergency
Appendix C (Normative) Cleaning Fluids Compatibility Inspection Method
Appendix D (Normative) Inspection Method for Cleaning Fluids Corrosiveness to Metal
Appendix E (Normative) Inspection Method for Influence of Cleaning Fluids on Rubber
Appendix F (Normative) Inspection Method for Influence of Cleaning Fluids on Plastic
Appendix G (Normative) Inspection Method for Influence of Cleaning Fluids on Automotive Organic Film
Appendix H (Normative) Inspection Method for Stability of Cleaning Fluids
Appendix I (Normative) Inspection Method for Water Resistance of Water-repellent Cleaning Fluids for Automotive Windshield
